BIOS Recovery* * For more info, see FIC Technical Support Web pages If you've damaged contents of your BIOS chip by using DMI Utility or performing an incomplete BIOS upgrade, you can try the Boot Block Feature (it's a BIOS setting) to recover your system. Try using an ISA VGA card and see wether that system will alow you to perform a Boot Block. The boot Block feature allows you to boot at least on Drive "A" for you to Re-program the BIOS using a Flash Utility. Download a BIOS and Flash Utility from our Web Site and try programming your BIOS again. You can also try to reset the CMOS by removing the CMOS battery for at least 2 minutes and try to short the negative and positive side of the battery socket by pressing it downward. If you still cannot recover the BIOS, try to find a computer or electronics shop (or friend) with EPROM programmer (EPROM burner) who can burn-in BIOS file into the chip for you. You will need to supply old BIOS file (either a backup file from a floppy or download it from the FIC Web site). Finally, if you still cannot recover your BIOS, you can try to purchase a new Flash ROM chip (partially remove the sticker on your chip to find out the type/specs and try to find (don't forget to check Internet search engines like Yahoo) a shop that sells Flash ROM chips. After you've got a new chip, follow the steps in the paragraph describing EPROM programming device (EPROM programmer).Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.