1. fm560.exe Driver
2. README.TXT File Contents

README.TXT Driver File Contents (fm560.exe)

=====================================================
NOTES ON
Installing Intelligent V.90 56K FAX/Modem PC Card
=====================================================
        

1. This diskette contains :

*       README.TXT  : This README file
*       PC_CARD.INF : .INF file for both Windows 95 and NT 4.0
*       MDMEN.EXE   : Fax/Modem Enabler




2. Installation for Microsoft Windows 95

       (1) Select "Driver from disk provided by hardware manufacturer" item
           at the "New Hardware Found" window, when you plug the PCMCIA
           Fax/Modem card into the PCMCIA slot of your Windows 95 system
           at the first time.
       (2) Input the path "A:\" to load the INF file.
       (3) Press "OK" button.



3. Installation for Microsoft Windows NT 4.0

       (1) Make sure the PCMCIA card is plugged into the PCMCIA slot.
       (2) Start up the Windows NT 4.0.
       (3) Double click the Modem Icon in "Control Panel" window.
       (4) In "Install New Modem" window, press "Next" button to auto-detect
           the modems in the system.
       (5) Press "Change" button to change the modem type.
       (6) Press "Have Disk..." button.
       (7) Input path "A:\" and press "OK" button.
       (8) Select a correct modem type e.g.,"PCMCIA 56Kbps FAX+Modem"
           and then press "OK" to accept the modem type.
       (9) Press "Finish" button.

4. Installation for Microsoft Windows 98/98SE


       (1)Select "Driver from disk provided by hardware manufacturer" item
           at the "New Hardware Found" window, when you plug the 56K Fax/Modem 
           card into the PCMCIA slot of your Windows system at the first time.
       (2)Input the path "A:\" to load the INF file.
       (3) Press "OK" button.


5. Installation for Microsoft Windows Millennium


       (1) Insert the 56K FAX + Modem PC Card into a free PC Card Slot.
            Windows will detect this device automatically. 
        (2)Insert the device driver disk into the floppy disk drive. 
        (3) Choose "Specify the location of the Driver (Advanced)" and click Next.
        (4) Choose "Specify the location" and type A:.  Click Next.
        (5) Expect a minor delay and the appropriate driver for this device should be found.
        (6) Click Next.

       Click Finish. Then the software installation for this device will be completed 
        successfully.
       
       If prompted to restart Windows Millennium, click Yes.


6. Installation for Microsoft Windows 2000

       
       (1) Insert the 56K FAX + Modem PC Card  into a free PC Card Slot.
            Windows will detect this device automatically. 
        (2) The hardware will be installed as default,a standard PCMCIA Card Modem. 
        (3)Go to My Computer->Control Panel->System->Hardware. Select Device Manager. 
        (4)Select Standard PCMCIA Card Modem, and select Properties.
        (5) Select Update Driver.
        (6) Select Floopy disk drives. Insert the software disk into the floopy disk
            drive and click Next.
        (7) If the Upgrade Device Driver Wizard chooses the correct driver, click Next. 
        (8) "Digital Signature Not Found" appears, click Yes.
        (9) Click Finish to finish the installation process.

7. Installation for Microsoft Windows XP

        (1) Start up your computer.  After Windows XP is up and running,
            put the driver disk of PCMCIA Ethernet into drive A:.
        (2) Insert PCMCIA Ethernet Card into PCMCIA slot.
        (3) When the Found New Hardware Wizard window appears, select
            "Install the software automatically (Recommended)" then
            click "Next" button.
        (4) In response to the message in Hardware Installation window
            "The software you are installing for this hardware:
                 ......
            has not passed Windows Logo testing to verify it compatibility with
            Windows XP......",
            click "Continue Anyway" to install the driver.

        (5) Click "Finish" to complete the driver installation.


8. FAX MODEM ENABLER

The enabler, MDMEN.EXE is used to initialize the modem when you are not
using Card Services.  You can use the Enabler as DOS command or DOS driver.
It means that you can load the enabler from the DOS prompt or put it into the
AUTOEXEC.BAT or put it into the CONFIG.SYS to load it everytime you start your
computer.

        MDMEN [/COM=m] [/IRQ=nn] [/SLT=n]

        where
            COM=m  Specify the COM port number (m=1 -- 3). Default is 2.
            IRQ=nn Specify the interrupt request number in decimal. Default is
                       4 for COM1, 3 for COM2, 4 for COM3, 3 for COM4.
            SLT=n  Specify the slot number the Fax/Modem card plugged.
                       Default is auto-detection.


9. TECHNICAL NOTES FOR ENABLER

   (1)  Most communication software follows the Interrupt settings and
        I/O address settings as shown below:

                        IRQ Number        I/O Address

               COM1:        4                 3F8
               COM2:        3                 2F8
               COM3:        4                 3E8
               COM4:        3                 2E8

   (2)  If you are using Windows 3.1X, you can change the IRQ under the
        CONTROL PANEL - PORTS - ADVANCED dialog box. If you change the
        COMPORT and IRQ under Windows, be sure that it matches the parameter
        in the MDMEN.EXE.


   (3)  Two COM ports cannot share an interrupt even the default value is
        the same for example COM1 and COM3 or COM2 and COM4. If your system has
        COM1 and COM2 already, you may run MDMEN with /COM=3 and /IRQ=n where
        n is an available interrupt number other than 3 or 4. When you run a
        modem application program, the COM prot number and interrupt number
        specified at application should be to same with the parameter specified
        at MDMEN.EXE.