LAN Manager Server
------------------
Introduction:
-------------
This document describes the procedure to setup LAN Manager 2.X
Server driver for PCI Ethernet Card.
Location of Driver: \MSLANMAN.OS2\DRIVERS\ETHERNET\RTSND\RTSND.OS2
Sample Configuration Files:
---------------------------
CONFIG.SYS (will contain):
DEVICE=C:\LANMAN.OS2\DRIVERS\PROTMAN\PROTMAN.OS2 /I:C:\LANMAN.OS2
DEVICE=C:\LANMAN.OS2\DRIVERS\ETHERNET\RTSND\RTSND.OS2
PROTOCOL.INI (will contain):
[RTSND_NIF]
; PROTOCOL.INI SAMPLE
DriverName = RTSND$
Setup Procedures:
-----------------
Before you start with the installation process, make sure that the
adapter is properly installed and configured. Make sure your
Microsoft LAN Manager is properly installed.
1. Run the appropriate Microsoft Lan Manager SETUP for computer you
are setting up.(OS/2 Server). Select "Configuration"
item ,(the PCI Ethernet Card driver isn't included on the Lan Manager
disk) and insert the PCI Ethernet Card driver disk, select the
"10/100 PCI Ethernet Card" and follow the directions.
2. When completed, reboot your computer .
NOTES:
------
Sample PROTOCOL.INI for LAN Manager:
[PROTMAN]
DRIVERNAME = PROTMAN$
DYNAMIC = YES
PRIORITY = NETBEUI
[NETBEUI_XIF]
Drivername = netbeui$
SESSIONS = 6
NCBS = 12
BINDINGS = "RTSND_NIF"
LANABASE = 0
[RTSND_NIF]
;
; PROTOCOL.INI Sample Adapter
;
DriverName = RTSND$
-----------------------------------[ END ]-------------------------------------
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.