SCO5X.TXT Driver File Contents (sn3200ct.exe)

   SCO OpenServer v5.0
   This document describes the procedure to install the SCO OpenServer 5.0
   driver for SN-3200 PCI ethernet adapter.

   Location of Driver:     \SCO\5X\DRIVER.O

   The following files will be used in this installation:

   Files          Contents
   -----------    -----------------------------------------
   Driver.o       SN-3200 PCI MDI Driver Program
   setup          Transfer dos format to unix format setup program
   Master         Used by netconfig
   System         Used by netconfig
   Node           Used by netconfig
   Space.c        Used by netconfig
   space.h        Used by netconfig
   lkcfg          Used by netconfig
   AOF/r3e        Used by netconfig

   1.  Installation Diskette in DOS format.
       Put SN-3200 PCI UNIX Driver diskette to floppy A: and use doscp
       command to copy SN-3200 PCI SCO UNIX Driver into UNIX's

       # cd /
       # doscp a:/sco/5x/setup  /setup
       # chmod +x /setup
       # ./setup

   2.  Use netconfig utility

       Avaiable options:

       # netconfig

   3.  To add adapters, select "Add New Lan Adapter" from "Hardware".

   4.  Add Protocol to select SCO TCP/IP.
   5.  Enter the internet Address of this interface         n.n.n.n

   6.  Enter the netmask for this interface       (default

   7.  Enter the boardcast address for this interface   default: n.n.n.n

   8.  Do you want to relink to kernel now ?               y

   9.  Do you want this kernel to boot by default (y/n)    y

   10. Do you want the kernel environment rebuilt (y/n)    y

   11. Reboot unix

        # shutdown -y -g0

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web2, load: 0.40