Windows for Workgroups v3.10
Introduction:
-------------
This document describes the procedure to install Microsoft Windows
for Workgroups v3.10 driver for SN-3200 PCI ethernet adapter.
Location of Driver: \WFW31\PCIND.DOS
Sample Configuration Files:
---------------------------
CONFIG.SYS (install will add these lines)
DEVICE=C:\WINDOWS\PROTMAN.DOS /I:C:\WINDOWS
DEVICE=C:\WINDOWS\PCIND.DOS
*** DEVICE=C:\WINDOWS\MSIPX.SYS (Added if running NetWare)
DEVICE=C:\WINDOWS\WORKGRP.SYS
LASTDRIVE=P
PROTOCOL.INI (install creates this file)
[network.setup]
version=0x3100
netcard=SN3200,1,SN3200
transport=ms$netbeui,MS$NETBEUI
*** transport=ms$ipx,MS$IPX (Added if running NetWare)
lana0=SN3200,1,ms$netbeui
*** lana1=SN3200,1,ms$ipx (Added if running NetWare)
[protman]
DriverName=PROTMAN$
PRIORITY=MS$NETBEUI
[SN3200]
DriverName=PCIND$
AdapterID=@004005678901
[MS$NETBEUI]
DriverName=netbeui$
SESSIONS=10
NCBS=32
BINDINGS=SN3200
LANABASE=1
*** [MS$IPX] (Added if running NetWare)
*** Drivername=IPX$ (Added if running NetWare)
*** MediaType=Novell/Ethernet (Added if running NetWare)
*** Bindings=SN3200 (Added if running NetWare)
AUTOEXEC.BAT
C:\WINDOWS\NET START
*** C:\WINDOWS\MSIPX (Added if running NetWare)
*** C:\WINDOWS\NETX (Added if running NetWare)
New Windows for Workgroups Installation:
----------------------------------------
1. When installing Windows for Workgroups, you are prompted for a
network driver. Select the "Unlisted or Updated Network Driver".
2. Insert the SN-3200 adapter driver disk containing OEMSETUP.INF and
PCIND.DOS files.
3. Specify the directory for the driver (A:\WFW31) and select the
SN-3200 Adapter driver.
4. Select Advanced options, and make sure the parameters match the
card settings. Check keyword "AdapterID" which is provided by
PCIND.DOS . e.g. AdapterID=@004005678901
The installation program copies the necessary files
and creates PROTOCOL.INI for use with the adapter.
5. Continue the installation per Windows for Workgroups instructions.
Existing Windows for Workgroups Installation:
1. Select the "Control Panel" icon in the Main Group.
2. Select the "Network" icon.
3. Select the "Adapters" button.
4. Select the Add option.
5. Select "Unlisted or Updated Network Adapter"
6. Insert the adapter driver disk with OEMSETUP.INF and PCIND.DOS and
specify the path A:\WFW31.
7. Select the SN-3200 adapter driver.
8. The installation program copies the necessary files and
creates PROTOCOL.INI for use with the adapter.
9. Select "Close" and when prompted, restart computer for changes to
take affect and complete the installation.
NOTE: You must have a terminated cable attached to the adapter
when you start Windows for Workgroups. If you don't, Windows
for Workgroups hangs.
TO ADD NETWARE:
---------------
1. Select the "Control Panel" icon in the Main Group.
2. Select the "Network" icon.
3. Select the "Networks" button.
4. Select "Novell Netware" and select the add button.
5. Select "OK" and close the Network icon.
6. Select reboot computer and restart Windows.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.