LAN Manager Workstation/Server Introduction: ------------- This document describes the procedure to setup LAN Manager 2.1 Workstation/Server driver for SN-3200 PCI ethernet adapter. Location of Driver:(DOS) \MSLANMAN.DOS\DRIVERS\ETHERNET\SN3200\PCIND.DOS (OS/2)\MSLANMAN.OS2\DRIVERS\ETHERNET\SN3200\PCIND.OS2 Sample Configuration Files: --------------------------- CONFIG.SYS (for DOS will contain): DEVICE=C:\LANMAN.DOS\DRIVERS\PROTMAN\PROTMAN.DOS /I:C:\LANMAN.DOS DEVICE=C:\LANMAN.DOS\DRIVERS\ETHERNET\SN3200\PCIND.DOS CONFIG.SYS (for OS/2 will contain): DEVICE=C:\LANMAN.OS2\DRIVERS\PROTMAN\PROTMAN.OS2 /I:C:\LANMAN.OS2 DEVICE=C:\LANMAN.OS2\DRIVERS\ETHERNET\SN3200\PCIND.OS2 PROTOCOL.INI (will contain): [SN3200_NIF] ; SN-3200 RPOTOCOL.INI SAMPLE DriverName = PCIND$ Setup procedures : ---------------- Before you start with the installation process, make sure that the adapter is properly installed and configured. Make sure your Microsoft LAN Manager is properly installed. 1. Run the appropriate Microsoft Lan Manager SETUP for computer you are setting up.(DOS, OS/2 or OS/2 Server). Select "Configuration" item ,(the SN-3200 driver isn't included on the Lan Manager disk) and insert the SN-3200 driver disk, select the SN-3200 driver and follow the directions. 2. When completed, reboot your computer. NOTES: ------ 1. Parameters for the PROTOCOL.INI file: DRIVERNAME: This is the one required parameter. See example at top of this document for syntax. 2. Sample PROTOCOL.INI for LAN Manager: [PROTMAN] DRIVERNAME = PROTMAN$ DYNAMIC = YES PRIORITY = NETBEUI [NETBEUI_XIF] Drivername = netbeui$ SESSIONS = 6 NCBS = 12 BINDINGS = "ETHPCI_NIF" LANABASE = 0 [SN3200_NIF] ; ; SN-3200 PROTOCOL.INI Sample Adapter ; DriverName = PCIND$ AdapterID = @004005678901Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.