1. PJ3plusBT-Win2K-XP-Ver10.exe Driver
2. PJ3plusBT.INF File Contents

PJ3plusBT.INF Driver File Contents (PJ3plusBT-Win2K-XP-Ver10.exe)

;
; Copyright (c) 1999-2005 Pentax Imaging Company
;
; PJ3plusBT.INF - Install file for "Pentax PocketJet 3plus with Bluetooth®" Win2000/XP driver
;


[Version]
Signature="$Windows NT$"
Provider=%OEM%
ClassGUID={4D36E979-E325-11CE-BFC1-08002BE10318}
Class=Printer

;NOTE: CatalogFile is the "digital signature".
; Can't use this now. But, leave the placeholder.
;CatalogFile=PJ3plusBT.cat

; Date & version of driver package
;DriverVer=MM/DD/YYYY,XX.XX.XX.XX
DriverVer=09/30/2004,01.00.00.01


;
; Manufacturer section.
;
; This section lists all of the manufacturers
; that we will display in the Dialog box
;
[Manufacturer]
"Pentax"

[ControlFlags]
;this disallows the driver from being installed via APW for USB port.
;Apparently, WHQL requires this.
ExcludeFromSelect = USBPRINT\PENTAXPocketJet3plus7836
ExcludeFromSelect = USBPRINT\PENTAXPocketJet3plusF6E9

;
; Model sections.
;
; Each section here corresponds with an entry listed in the
; [Manufacturer] section, above. The models will be displayed in the order
; that they appear in the INF file.
;
[Pentax]
"Pentax PocketJet 3plus" = product-install,USBPRINT\PENTAXPocketJet3plus7836,PENTAXPocketJet3plus7836,USBPRINT\PENTAXPocketJet3plusF6E9
"Pentax PocketJet 3plus" = product-install,Pentax_PocketJet_3plus

;Since we are now disallowing installation via APW for USB (see 
; ControlFlags), this 2nd entry here will allow installing the driver for 
; IRDA.
;
; If IrPNP is supported, then this line should be of the form:
;"Pentax PocketJet 3plus" = product-install,AAAnnnn
;
;...where AAAnnnn is the HW ID compatible with the IrPNP specification.
;...and in this case, Windows will recognize the new hardware when the
; IRDA ports come into range and request install of the driver the 1st 
; time. 
;
; If IrPNP is NOT supported, then this line can just be of the form:
;"Pentax PocketJet 3plus" = product-install
;
; ...and this would also work for any other port that we may enable later
; via a conversion cable (e.g. Serial->USB converter).


; Installer Sections
;
; These sections control file installation, and reference all files that
; need to be copied. The section name will be assumed to be the driver
; file, unless there is an explicit DriverFile section listed.
;

[product-install.NT]
CopyFiles=PJ3plusFILES
DATAFILE=PJ3plus.GPD
DataSection=UNIDRV_DATA
Include=NTPRINT.INF
Needs=UNIDRV.OEM,UNIDRV_DATA

; Copy Sections
;
; Lists of files that are actually copied. These sections are referenced
; from the installer sections, above. Only create a section if it contains
; two or more files (if we only copy a single file, identify it in the
; installer section, using the @filename notation) or if it's a color
; profile (since the DestinationDirs can only handle sections, and not
; individual files).

[PJ3plusFILES]
;NOTE: tried adding this 0x00000040 to all, but it causes a problem
;with PJ3.DLL when installing it for 2nd USB port since for some reason
;the system thinks it is replacing a newer file even though it is same date.
;
;PJ3plus.DLL,,, 0x00000040
;
PJ3plus.DLL
PJ3plus.GPD
PJ3plus.INI

;
; Call SetupSetDirectoryId with 66000 to set the target directory at runtime
; (depending on which environment drivers are getting installed)
;

[DestinationDirs]
DefaultDestDir=66000

[SourceDisksNames.x86]
1   = %Disk1%,,,""

[SourceDisksFiles]
pj3plus.gpd  =1
pj3plus.dll  =1
pj3plus.ini  =1

;
; Localizable Strings
;

[Strings]
OEM="Pentax"
Disk1="Pentax PocketJet Driver CD"