Oct 1995 MAGITRONIC EZ2000+ Ethernet Adapter Packet Driver for PC-NFS Installation ===================================== ***************************************************** * Packet Driver Program for Sun MicroSystems PC-NFS * ***************************************************** The PC-NFS Driver Program lets you run Sun MicroSystems PC-NFS on your PC with the MAGITRONIC EZ2000+ Ethernet Adapter. The following files will be used in this installation: Files Contents ----------- ---------------------------------------------------------- PDNFS.SYS PC-NFS Driver Program EZ2000.SYS Packet driver program for EZ2000+ Ethernet Adapter EZ2000.COM Packet driver program for EZ2000+ Ethernet Adapter Two installation methods are detailed below: METHOD 1: 1. Install the PC-NFS program according to the procedure described in the PC-NFS manual. On the screen of the PC-NFS install program, select 3C501 (the 3Com EtherLink card) as your network interface card. When the screens prompt you, select 3 for the interrupt level (IRQ), and select 300h for the base I/O address. 2. Copy the following files to the \NFS directory of your hard disk: PDNFS.SYS EZ2000.SYS EZ2000.COM 3. Modify the CONFIG.SYS file as follows: DEVICE=C:\ANSI.SYS DEVICE=C:\NFS\PCNFS.SYS /m DEVICE=C:\NFS\SOCKDRV.SYS DEVICE=C:\NFS\VECIE6.SYS DEVICE=C:\NFS\EZ2000.SYS <-d> <packet_int_no> <-w> DEVICE=C:\NFS\NFSVEC.SYS DEVICE=C:\NFS\PDNFS.SYS LASTDRIVE=V AUTOEXEC.BAT file: SET PATH = C:\;C:\NFS SET TZ=EST5EDT SET NFSDRIVE=C NET YPDOMAIN ypserver NET START RDR NET YPSET homer NET NAME john NET USER F: \\user\john We use the name "john" here as an example. 4. Reboot the PC to start PC-NFS. You may now execute the PC-NFS commands to communicate other computers through the TCP/IP protocol. METHOD 2: 1. Install the PC-NFS program according to the procedure described in the PC-NFS manual. On the screen of the PC-NFS install program, select 3C501 (the 3Com EtherLink card) as your network interface card. When the screens prompt you, select 3 for the interrupt level (IRQ), and select 300h for the base I/O address. 2. Copy the following files to the \NFS directory of your hard disk: PDNFS.SYS EZ2000.SYS EZ2000.COM 3. Modify the CONFIG.SYS file as follows: DEVICE=C:\ANSI.SYS DEVICE=C:\NFS\PCNFS.SYS /m DEVICE=C:\NFS\SOCKDRV.SYS DEVICE=C:\NFS\VECIE6.SYS DEVICE=C:\NFS\NFSVEC.SYS DEVICE=C:\NFS\PDNFS.SYS LASTDRIVE=V AUTOEXEC.BAT file: SET PATH = C:\; C:\NFS SET TZ=EST5EDT SET NFSDRIVE=C EZ2000 <-d> <packet_int_no> <-w> NET YPDOMAIN ypserver NET START RDR NET YPSET homer NET NAME john NET USER F: \\user\john We use the name "john" here as an example. 4. Reboot the PC to start PC-NFS. You may now execute the PC-NFS commands to communicate other computers through the TCP/IP protocol.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.