SETUP.INF Driver File Contents (intel_PIIX_PIIX3.zip)

;
; SETUP Information
;

[wellcome]
vender="Bus Master IDE"
name=""
logo=0
color=2
wintitle="PIIX/PIIX3 Bus Master IDE Setup"
group="Bus Master"


[dir]
default=C:\BMIDE


[disk]
;
; For configuration of disk driver and fast disk
;
driver=TRIDMA.SYS
SetupFastDisk=1
CheckCdrom=0
fastdisk=TRICTR.386
transint13=TRIINT13.386


[cdrom]
;
; For configuration of CD-ROM driver
;
; driver=drivername[ parameters]
;
driver=TRICD.SYS /D:MSCD000
mscdex=MSCDEX /D:MSCD000
SetupCDROM=1


[diskfiles]
;
; Disk driver
;
TRIDMA.SYS=
TRICTR.386=
TRIINT13.386=


[cdromfiles]
;
; CD-ROM driver
;
TRICD.SYS=


[commonfiles]
;
; Read me
;
;README.TXT=


[creategroup]
number of utilities=0


[Help]
##Windows 95
1)  Insert the floppy disk into drive A:.
2)  Open "My Computer", double click "Drive A:".
3)  Double click "Win95".
4)  Double click the Setup program.
5)  Then just follow the instruction.
$$

##Windows NT
1)  From the Program Manager, double click on "Windows NT Setup"
    in the Main group.
2)  Select "Options/Add/Remove SCSI Adapters..."
3)  Click on Add.
4)  The "Select SCSI Adapter Option" dialog will appear;
    select "Other (Requires a disk from a hardware manufacturer)"
    from the "Adapter:" list box.
5)  Next, the "Insert Diskette" dialog box will appear; insert
    the Triones PIIX/PIIX3 Bus Master EIDE/ATAPI Driver disk into
    Drive A: and type in "a:\winnt35" and <Return>.
6)  Next, the "Select OEM Option" dialog box will appear; select
    "PIIX/PIIX3 Bus Master EIDE/ATAPI" and click "OK."
7)  Next, the "Select SCSI Adapter Option" dialogbox will appear;
    click on the "Install" button in the dialog box. If
    installation is successful, the "SCSI Adapter Setup" dialog
    box will reappear, and "PIIX/PIIX3 Bus Master EIDE/ATAPI" will
    be listed. That means the driver is installed.
8)  Reboot your system to load the driver.
$$

##OS/2
1)  Copy TRIOS2.ADD from the floppy diskette to your hard disk
    under the OS2 directory (i.e., C:\OS2).
2)  Edit C:\CONFIG.SYS  to  replace
        BASEDEV=IBM1S506.ADD
        with
        BASEDEV=TRIOS2.ADD
3)  Reboot the system.
$$

##SCO Unix
I.  SCO UNIX 3.2.x / SCO Open Desktop 3.x
1)  Install SCO UNIX 3.2.x or SCO Open Desktop 3.x using the
    default SCO IDE driver.
2)  Reboot your SCO UNIX system.
3)  Insert Triones supplied diskette into the 3.5inch floppy
    drive of your system. Use doscp  command to copy the file
    TRISCO.TAR to your /tmp directory. For example, if you are
    using floppy drive A, type:
        doscp  a:/scounix/trisco.tar /tmp/trisco.tar
4)  From root directory, type the following commands:
        mkdir  /inst
        cd  /inst
        tar  xvf  /tmp/trisco.tar  .
    (NOTE: there is a period at the end of the last command.)
5)  Now, insert a blank diskette into the floppy drive A and
    type:
        tar  cvf  /dev/<your floppy drive A device name>  .
    (NOTE: there is a period at the end of the last command.)
    Your floppy drive A device name could be:
        rfd096ds15      5.25    DSHD
        rfd0135ds18     3.5     DSHD
        rfd048ds9       5.25    DSDD
        rfd0135ds9      3.5     DSDD
    Now you have already made an installation diskette for the
    device driver. Start the installation by typing:
        custom
6)  Select the "Install" operation and then follow the guided
    steps. When prompted "Do you want to set the device
    configuration (y/n)", answer "n".
7)  Reboot your SCO UNIX system.

II. SCO UNIX 5.0
1)  Install SCO UNIX 5.0 using the default SCO IDE driver.
2)  Reboot your SCO UNIX system.
3)  Insert Triones supplied diskette into the 3.5inch floppy 
    drive of your system. Use doscp command to copy the file 
    TRISCO5.TAR to your /tmp directory.
    For example, if you are using floppy drive A, type:
        doscp  a:/scounix/trisco5.tar /tmp/trisco5.tar
4)  From root directory, type the following commands:
        mkdir  /inst
        cd  /inst
        tar  xvf  /tmp/trisco5.tar  .
    (NOTE: there is a period at the end of the last command.)
5)  Install the driver by typing:
        ./install
6)  Follow the steps and procedures (for control parameter 
    configuration)
7)  Reboot your SCO UNIX system.
$$

##NOVELL312
1)  Copy the driver TRIN312.DSK to the subdirectory which holds
    the file SERVER.EXE.
2)  Boot up the file server.
3)  On the system console and on the command prompt state,
    type in:
    load TRIN312.DSK <Enter>

You can also include the above command line into the start up
file STARTUP.NCF to load the driver automatically.
$$

##NOVELL4x
1)  Copy the driver TRIN4X.DSK to the subdirectory which holds
    the file SERVER.EXE.
2)  Boot up the file server.
3)  On the system console and on the command prompt state,
    type in:
    load TRIN4X.DSK  <Enter>

You can also include the above command line into the start up
file STARTUP.NCF to load the driver automatically.
$$



Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web5, load: 0.89