<<
/SAT
<<
/CONFIGURATION
<<
/ALWAYS_COPY [ (CONFIGURATION) (GUID_TRANSLATION) ]
>>
/GUID_TRANSLATION
<<
/BE8FD0E3-AEDC-11D2-9B53-00104B49BFF5 0
/BE8FD0E4-AEDC-11D2-9B53-00104B49BFF5 1
/BE8FD0E5-AEDC-11D2-9B53-00104B49BFF5 2
/BE8FD0E6-AEDC-11D2-9B53-00104B49BFF5 3
>>
/SCSI
<<
/USE_ASPI 0
/ASPI_DLLS [ (wnaspi32.dll) ]
/SCSI_HA_TYPE_A [ (eppscsi) (EPPSCSIx) ]
/HOST_BLACKLIST [ (ESDI_506) (ATAPI) (IDEATAPI) (PPA3) (SISIDE) (SBIDE) (SYMC8XX) (PIIXIDE) () ]
>>
/PLUS
<<
/WIN_DLL (SCNDRV95.dll)
/NT_DLL (scndrvnt.dll)
/RESET_OCCUPANCY 1
/TEST_INTERVAL 0 % milliseconds
/LAMP_OFF_TIMEOUT 900 % seconds
/CONTENTION_MODE 1
>>
/SCANLIB
<<
/SEPARATOR (:)
>>
/SNAPSCAN_GROUP
<<
/CAPABILITYFILE (satsnap.ps)
/VENDORS [ (AGFA) ]
/PREFERRED_BUFFER_SIZE 524288
/RINGBUFFER_SIZE 128
/MEASURE_SPEED 0
/ESTIMATE_SPEED 1
/MINIMUM_STATIC_SPEED 600
/HOST_SHADING_CALIBRATION 1
/DESCREENING_LPI_MULTIPLIER 4
/DESCREENING_HQF_ALLOWED 1
% SHORTENING THE FOLLOWING TIMEOUTS CAN CAUSE SCSI ERRORS!
%/RESERVE_UNIT_TIMEOUT 12000
%/DOWNLOAD_LUTS_TIMEOUT 12000
%/DEFINE_WINDOW_TIMEOUT 60000
%/GET_SCAN_INFO_TIMEOUT 12000
%/MEASURE_TXTIME_TIMEOUT 6000
%/MEASURE_TXTIME_TIMEOUT 6000
%/SET_SPEED_TIMEOUT 6000
%/CALIBRATION_TIMEOUT 60000
%/CALIBRATION_TIMEOUT 60000
%/START_SCAN_TIMEOUT 60000
%/GET_BUFFER_STATUS_TIMEOUT 6000
%/READ_TIMEOUT 60000
%/RELEASE_UNIT_TIMEOUT 60000
%/INITIALIZATION_TIMEOUT 60000
>>
/SnapScan
<<
/SCANLIB (satsnap:0)
/WIN98_BUSES (STI)
>>
/SNAPSCAN.300
<<
/SCANLIB (satsnap:1)
/WIN98_BUSES (STI)
>>
/SNAPSCAN.310
<<
/SCANLIB (satsnap:1)
/WIN98_BUSES (STI)
>>
/SNAPSCAN.600
<<
/SCANLIB (satsnap:1)
/CAPABILITYFILE (satsnap1.ps)
/WIN98_BUSES (STI)
>>
/SNAPSCAN.EZ
<<
/SCANLIB (satsnap:2)
/CAPABILITYFILE (satsnap1.ps)
/WIN98_BUSES (STI)
>>
/SNAPSCAN.1200P
<<
/SCANLIB (satsnap:2)
/CAPABILITYFILE (satsnap1.ps)
/WIN98_BUSES (STI)
>>
/SNAPSCAN.1212P
<<
/SCANLIB (satsnap:2)
/CAPABILITYFILE (satsnap1.ps)
/WIN98_BUSES (STI)
>>
/SNAPSCAN.1212P_2
<<
/SCANLIB (satsnap:1)
/CAPABILITYFILE (satsnap1.ps)
/FIRMWARE_EXTENSION (bin)
/WIN98_BUSES (STI)
>>
/SNAPSCAN.1236U
<<
/MEASURE_SPEED 1
/ESTIMATE_SPEED 0
/SCANLIB (satsnap:1)
/CAPABILITYFILE (satsnapN4.ps)
/APPLY_NR_FILTER 0
/APPLY_DOUBLE_SAMPLING 1
/BUSES (USB)
/WIN98_BUSES (STI)
/NT5_BUSES (STI)
>>
/SNAPSCAN.1236
<<
/MEASURE_SPEED 1
/ESTIMATE_SPEED 0
/SCANLIB (satsnap:1)
/CAPABILITYFILE (satsnapN4.ps)
/APPLY_NR_FILTER 0
/APPLY_DOUBLE_SAMPLING 1
/WIN98_BUSES (STI)
>>
/SNAPSCAN.1212-P
<<
/SCANLIB (satpsnap:0)
/BUSES (PLUS)
>>
/SNAPSCAN.1212U
<<
/MEASURE_SPEED 1
/ESTIMATE_SPEED 0
/VENDORS [ (Agfa Gevaert N.V.) ]
/SCANLIB (satsnap:1)
/CAPABILITYFILE (satsnap1.ps)
/BUSES (USB)
/WIN98_BUSES (STI)
/NT5_BUSES (STI)
>>
/SNAPSCAN.1212U_2
<<
/MEASURE_SPEED 1
/ESTIMATE_SPEED 0
/SCANLIB (satsnap:1)
/CAPABILITYFILE (satsnap1.ps)
/FIRMWARE_EXTENSION (bin)
/BUSES (USB)
/WIN98_BUSES (STI)
/NT5_BUSES (STI)
>>
/SNAPSCAN.TOUCH
<<
/VENDORS [ (AGFA) (Agfa) ]
/SCANLIB (satsili:0)
/CAPABILITYFILE (satsili.ps)
/BUSES (USB)
/WIN98_BUSES (STI)
/NT5_BUSES (STI)
>>
/PSNAPSCAN_GROUP
<<
/CAPABILITYFILE (satpsnap.ps)
/VENDORS [ (Agfa) ]
/FIRMWARE_REVISIONS [ (15) ]
/FORCE_RELEASE 1
/PREFERRED_BUFFER_SIZE 65535
/DESCREENING_LPI_MULTIPLIER 3
/DESCREENING_HQF_ALLOWED 1
>>
/STUDIOSCAN_GROUP
<<
/VENDORS [ (AGFA) ]
/PREFERRED_BUFFER_SIZE 65536
/DESCREENING_LPI_MULTIPLIER 4
% SHORTENING THE FOLLOWING TIMEOUTS CAN CAUSE SCSI ERRORS!
%/CHECK_DEVICE_TIMEOUT 60000
%/ADF_NOT_READY_TIMEOUT 500
%/DOWNLOAD_LUTS_TIMEOUT 60000
%/SET_WINDOW_FRAME_TIMEOUT 6000
%/ACCESSORY_TIMEOUT 6000
%/MODE_SELECT_TIMEOUT 6000
%/MODE_SELECT_ONE_TIMEOUT 6000
%/START_SCAN_TIMEOUT 60000
%/START_SCAN_WAIT_TIMEOUT 0
%/GET_SCAN_STATUS_TIMEOUT 60000
%/SCAN_STATUS_BUSY_TIMEOUT 200
%/READ_TIMEOUT 60000
%/STOP_SCAN_TIMEOUT 60000
>>
/StudioScan
<<
/SCANLIB (satstudio:0)
/CAPABILITYFILE (satstudio0.ps)
/WIN98_BUSES (STI)
>>
/StudioScan.II
<<
/SCANLIB (satstudio:1)
/CAPABILITYFILE (satstudio1.ps)
/WIN98_BUSES (STI)
>>
/ARCUS.II
<<
/SCANLIB (satstudio:2)
/CAPABILITYFILE (satstudio2.ps)
/WIN98_BUSES (STI)
>>
/DUOSCAN
<<
/SCANLIB (satstudio:3)
/CAPABILITYFILE (satstudio3.ps)
/WIN98_BUSES (STI)
>>
/StudioStar
<<
/SCANLIB (satstudio:4)
/CAPABILITYFILE (satstudio4.ps)
/FAST_PRESCAN_SUPPORTED 1
/HOST_SHADING_CALIBRATION 0
/WIN98_BUSES (STI)
>>
>>
>>
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.