ABOUT THE MCS-600/700 INSTALLATION ============================================ ------------------- Product Description ------------------- The MCS-600/700 has been designed to provide easy "Plug and Play" installation. The MCS-600/700 supports all SCSI disk drives that conform to the ANSI standard "Common Command Set". The MCS-600/700 ROM BIOS is designed to identify and properly support the type of SCSI disk drive it is installed with. The MCS-600/700 will work with IBM PS/2 MicroChannel family and compatible computers. --------------------- Physical Installation --------------------- Follow the IBM instructions for removing the cover and inserting the MCS-600/700 in your MicroChannel computer. The MCS-700 external connection to a SCSI device is via the high density connector at the head of the board. The MCS-600 external connection to a SCSI device is via the 25-pin D-SUB connector with Apple SCSI Pin-Out at the head of the board. The HCA-120 cable must be used with this connector. Contact Future Domain for assistance in interconnecting cables to fit your application. -------------------- System Configuration -------------------- Boot up the system using the "Reference Diskette" that came with your MicroChannel computer. Make a copy of the diskette using the "Backup the Reference Diskette" option from the main menu. Next, copy the Future Domain @6127.ADF file to the backup copy of your "Reference Diskette". This allows configuration of the MCS-600/700 SCSI controller via the Reference Diskette's setup utilities. Once completed, boot from the backup copy of your Reference Diskette and select the "Set Configuration" option. Follow the instructions for setting up controllers in the MicroChannel System. The MCS-600/700 will show up on the menu. Note : The "Automatic Configuration" option may not always correctly resolve system resource conflicts. Therefore, we recommend users to select the "Set Configuration" option instead. For assistance or suggestions, please call or write to: Customer Service Future Domain Corporation 2801 McGaw Ave. Irvine, CA 92714 Phone: (714) 253-0440 Fax: (714) 253-0429Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.