README.TXT Driver File Contents (FNC-0113TX.zip)

   Workstation for DOS ODI Client

   Introduction:
   -------------
   This document describes the procedure to setup the NetWare v3.X ,v4.X ,v5.x
   workstation driver for VIA VT6105 Rhine III Fast Ethernet Adapter

   Location of Driver:     \NETWARE\DOSODI\FETODI.COM

   Sample Configuration Files:
   ---------------------------
     STARTNET.BAT:
         LSL
         FETODI
         IPXODI
         NETX or VLM (VLM's for NetWare 4.x )

     NET.CFG:
 Link Driver FETODI

        Frame Ethernet_802.2
        Frame Ethernet_802.3
        Frame Ethernet_II
        Frame Ethernet_SNAP

;        CONNECTIONTYPE AUTOSENSE
;        FLOW_CONTROL ENABLE
;        HALFDUPLEX
;        FULLDUPLEX
;        SPEED 10
;        SPEED 100
;        AUTO
;        PCISLOT 9

NetWare DOS Requester
        FIRST NETWORK DRIVE = F
        NETWARE PROTOCOL = NDS BIND


   Setup Procedures for NetWare 3.11/3.12 Client :
   -----------------------------------------------
      Before you start with the installation process, make sure that
      the  adapter is properly installed and configured. Make sure
      that your NetWare workstation is properly installed.

      1. Copy FETODI.COM from the Driver Diskette subdirectory
         A:\NETWARE\DOSODI to your harddisk.

      2. Create a batch file, or add to your STARTNET.BAT file the commands
         listed above under STARTNET.BAT

      3. Edit the NET.CFG file that you copied over. Edit the file per your
         requirements (see examples above).  If there are two frame types
         listed, whichever frame type is listed first, that is the one that
         the  driver will load.  See above for examples.  The NET.CFG file
         should be in the same directory with the LSL.COM file.


   Setup Procedures for NetWare 4.X Client with vlm:
   -----------------------------------------------
      The  installation utility INSTALL.EXE is located on NetWare's
      "Workstation for DOS" disk. Run INSTALL.EXE from the Workstation
      for DOS Disk.

      The NetWare Client Install program screen will appear.  You must
      complete each of the questions.  These options are specific to your
      needs.

      1. Enter the destination directory for the NetWare Client.
         (The default directory is C:\NWCLIENT).

      2. Gives you the option to automatically update the CONFIG.SYS
         and the AUTOEXEC.BAT files or modify them at a later time
         manually.

      3. Do you wish to install support for MS Windows ? (Y/N)
         (MS Windows Subdirectory: default C:\WINDOWS)

      4. Asks you to select a network driver and provide  configuration
         options. It uses the specifications you select to create the
         file NET.CFG. Insert the VIA drivers disk when prompted for
         the driver disk and specify the driver path A:\NETWARE\DOSODI

      5. Press <Enter> to install


Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: ftp, load: 2.06