OEMSETUP.INF Driver File Contents (Intel_Pro_100.zip)

;#***********************************************************************
;# Windows NT OEMSETUP.INF for
;#
;#       Intel EtherExpress PRO/100+ PCI Adapter
;#
;# Copyright© 1994-1997 Intel Corporation.  All rights reserved.
;#***********************************************************************
; *****************  Version 1.67  *****************
[Identification]
OptionType = NetAdapter
[PlatformsSupported]
ISA
EISA
MCA
PCI
"Jazz-Internal Bus"
[LanguagesSupported]
ENG
[Options]
E100BEXP
E100BPCI
E10PPCI
E100BRWA
[OptionsTextENG]
E100BEXP  = "Intel EtherExpress PRO Adapter"
[FileConstants]
NDIS3Name = "E100B"
NDIS4Name = "E100BNT"
ExeName   = "PROSET"
Sp1Name   = "EP100DG"
Sp3Name   = "SPDO3DG"
KddName   = "PROKDD"
ProdHelp  = "E100SET"
GenHelp   = "557SET"
DllName   = "EPRO100"
AftName   = "IAFT"
AftPrefix = "iAFT"
SubVendorID = "32902"
CheckSum = "32634"
CompatibleNum = "Compatible1"
Manufacturer = "Intel"
ProductSoftwareName  = "E100B"
ProductSoftwareTitle = "Intel EtherExpress PRO Adapter"
ProductSoftwareImagePathNDIS3 = "%SystemRoot%\System32\drivers\e100b.sys"
ProductSoftwareImagePathNDIS4 = "%SystemRoot%\System32\drivers\e100bnt.sys"
NetRuleSoftwareType     = "E100BSys ndisDriver E100BDriver"
NetRuleSoftwareBindForm = """E100BSys"" yes no container"
NetRuleSoftwareClass    = {"E100BDriver basic"}
NetRuleSoftwareBindable = {"E100BDriver E100BAdapter non exclusive 100"}
ImagePathNDIS3 = "\SystemRoot\System32\drivers\e100b.sys"
ImagePathNDIS4 = "\SystemRoot\System32\drivers\e100bnt.sys"
Configure = "EPRO100_Configure"
Detect = "EPRO100_Detect"
Diagnose = "EPRO100_Diagnose"
DLL = "EPRO100.DLL"
RegistryKey = "EPRO100_GetRegistryKey"
Summary = "EPRO100_Resource_Summary"
AdapterDescription = "EPRO100_GetAdapterDescription"
InstallAnyway = "EPRO100_InstallAnyway"
DeviceExist = "EPRO100_DeviceExist"
GetExtendedFeatures = "EPRO100_GetExtendedFeatures"
RemoveTeam = "RemoveTeam"
AddTeam	= "AddTeam"
BindingReview = "BindingReview"
AdapterCount = "AdapterCout"
Adapter = "Intel EtherExpress PRO Adapter"
Help = "E100SET.HLP"
ExeKeyName = $(!NTN_ServiceBase)"\PROSet"
ExeAdapterName = "EPRO100"
ExeParameters = "Parameters"
ProductHardwareName     = "E100B"
ProductHardwareTitle    = "Intel EtherExpress PRO Adapter"
ProductHardwareDescription = "Intel EtherExpress PRO Adapter"
NetRuleHardwareType     = "E100B E100BAdapter"
NetRuleHardwareBindForm = " yes yes container"
NetRuleHardwareClass    = {"E100BAdapter basic"}
ProductHardwareE100BEXPTitle       = "Intel EtherExpress PRO Adapter"
ProductHardwareE100BEXPDescription = "Intel EtherExpress PRO Adapter"
FuncTitle = "Intel EtherExpress PRO Adapter Setup"
ProdSoftwareDescription = "Intel EtherExpress PRO Adapter Driver"
ProdHardwareDescription = $(ProductHardwareTitle)
Disk1 = "Intel EtherExpress PRO Adapter Driver Disk"
Path = "NT\"
BusNumberStr = "0,7,BusNumber,0,2,0,0,16,1"
BusType = "0,7,BusType,0,2,5,2,5,1"
BusTypeLocal = "0,7,BusTypeLocal,0,2,5,2,5,1"
Eid = "0,7,Eid,0,2,0,0,4294967295,1"
Enhanced = "1,4,Enhanced Mode,0,1,On,Off,On"
Fifo = "0,3,Fifo Depth,0,2,12,0,15,1"
ForceDpx = "1,4,Duplex Mode,0,1,Auto,Auto,Half,Full"
MediaType = "0,7,MediaType,0,2,1,1,1,1"
MsPciScan = "0,4,MsPciScan,0,2,1,0,1,1"
NumCoalesce = "1,7,Coalesce Buffers,0,2,8,1,32,1"
NumRfd = "1,7,Receive Buffers,0,2,32,1,1024,1"
NumTbd = "0,3,Transmit Buffer Descriptors,0,2,64,1,65535,1"
NumTbdPerTcb = "0,4,Transmit Buffers per Frame,0,2,12,1,16,1"
NumTcb = "1,7,Transmit Control Blocks,0,2,16,1,80,1"
Off = "1,3,Off Timer,0,2,2,1,65535,1"
On = "1,3,On Timer,0,2,32768,1,65535,1"
RxDmaCount = "0,4,RxDmaCount,0,2,0,0,63,1"
RxFifo = "0,4,Receive Fifo Depth,0,2,8,0,15,1"
SlotNumber = "0,7,SlotNumber,0,2,0,0,16,1"
Speed = "1,7,Network Speed,0,4,Auto,Auto,0,10Mbps,10,100Mbps,100"
Threshold = "0,7,Transmit Threshold,0,2,16,0,200,1"
TxDmaCount = "0,4,TxDmaCount,0,2,0,0,63,1"
TxFifo = "0,4,Transmit Fifo Depth,0,2,8,0,15,1"
UnderrunRetry = "0,4,UnderrunRetry,0,2,1,0,3,1"
PerfOptims = "0,4,PerfOptims,0,2,0,0,65535,1"
NetworkAddress = "1,7,Locally Administered Address,0,5,0,0,1,1"
UcodeSW = "0,7,UcodeSW,0,2,1,0,1,1"
Adaptive_IFS = "1,7,Adaptive Inter-Frame Spacing,0,2,1,0,255,1"
Txmitwait = "0,7,Txmitwait,0,2,1,0,255,1"
OLD_1BYTE  = 139
OLD_2BYTE  = 98
NETCARD_ID = 25227
ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName   = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"
UtilityInf    = "UTILITY.INF"
ParamInf      = "NCPARAM.INF"
subroutineinf = "SUBROUTN.INF"
SoftwareType  = "driver"
Exit_Code     = 0
NetRuleSoftwareUse = $(SoftwareType)
NetEventDLL = "%SystemRoot%\System32\netevent.dll"
NetEventDLLAft= "%SystemRoot%\System32\netevent.dll;%SystemRoot%\System32\drivers\iaft.sys"
IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll"
ProductMajorVersion = "3"
ProductMinorVersion = "0"
ProductVersion  = $(ProductMajorVersion)"."$(ProductMinorVersion)
ATeamSoftwareType = "driver"
ProductATeamMajorVersion = "4"
ProductATeamMinorVersion = "0"
ProductATeamSoftwareTitle          = "Intel Adapter Fault Tolerance NDIS Miniport Driver"
ProductATeamSoftwareDescription    = "Intel Adapter Fault Tolerance NDIS Miniport Driver Description"
ProductATeamTransportTitle         = "Intel Adapter Fault Tolerance Module"
ProductATeamTransportDescription   = "A software module that provides the Intel Adapter Fault Tolerance capability to your EtherExpress adapter."
ProductATeamHardwareTitle          = "Intel Adapter Fault Tolerance Team"
ProductATeamHardwareDescription    = "A team of Intel EtherExpress PRO/100+ Adapters working together to provide high availability, fail safe network operation."
ProductATeamSoftwareImagePath      = "\SystemRoot\System32\drivers\iaft.sys"
NetRuleATeamSoftwareReview   = 1
ProductATeamSoftwareName = "iAFT"
NetRuleATeamSoftwareType = "iaftSys intermediateDriver"
NetRuleATeamSoftwareUse = $(SoftwareType)" none none"
NetRuleATeamSoftwareBindForm = """iaftSys"" yes no container"
NetRuleATeamSoftwareClass = { +
"intermediateDriver ndisDriver yes" +
}
NetRuleATeamSoftwareBindable = { +
"intermediateDriver virtualAdapter non exclusive 100", +
}
ProductATeamTransportName = "iAFTProtocol"
NetRuleATeamTransportType = "multispan intermediateTransport"
NetRuleATeamTransportUse = "transport none none"
NetRuleATeamTransportBindForm = "iAFTProtocol yes yes container"
NetRuleATeamTransportClass = { +
"intermediateTransport basic yes", +
}
NetRuleATeamTransportBindable = { +
"intermediateTransport ndisDriver non non 100", +
}
ProductATeamHardwareName = "iAFT"
NetRuleATeamHardwareType = "iAFT virtualAdapter"
NetRuleATeamHardwareClass = {"virtualAdapter basic"}
NetRuleATeamHardwareBindForm = " yes yes container"
ATeamTransportKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductATeamTransportName)"\CurrentVersion"
ATeamTransportParamKeyName    = $(!NTN_ServiceBase)"\"$(ProductATeamTransportName)"\Parameters"
ProductATeamKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductATeamSoftwareName)"\CurrentVersion"
PROSetKeyName = $(!NTN_ServiceBase)"\PROSet"
PROSetAdapterName = "EPRO100"
PROSetParameters = "Parameters"
EE16_1BYTE = 139
EE16_2BYTE = 98
NETCARD_ID = 25227
[Files-Inf]
1, oemsetup.inf, SIZE=50000, RENAME=$(!UG_Filename)
[Files-N3NDIS3]
1, $(Path)$(NDIS3Name).SY_, SIZE=50000, RENAME=$(NDIS3Name).SYS
[Files-N3NDIS4]
1, $(Path)$(NDIS4Name).SY_, SIZE=50000, RENAME=$(NDIS4Name).SYS
[Files-N3NDIS4-iAFT]
1, $(Path)$(NDIS4Name).SY_, SIZE=50000, RENAME=$(NDIS4Name).SYS
1, $(Path)$(AftName).SY_,     SIZE=50000, RENAME=$(AftName).SYS
[Files-Exe]
1, $(Path)$(ExeName).EX_,  SIZE=50000, RENAME=$(ExeName).EXE
1, $(Path)$(ExeName).CP_,  SIZE=50000, RENAME=$(ExeName).CPL
1, $(Path)$(Sp1Name).DL_,  SIZE=50000, RENAME=$(Sp1Name).DLL
1, $(Path)$(ProdHelp).HL_, SIZE=50000, RENAME=$(ProdHelp).HLP
1, $(Path)$(GenHelp).HL_, SIZE=50000, RENAME=$(GenHelp).HLP
1, $(Path)$(DllName).DL_,  SIZE=50000, RENAME=$(DllName).DLL
[Files-Exe-Drivers]
1, $(Path)$(Sp3Name).SY_,  SIZE=50000, RENAME=$(Sp3Name).SYS
1, $(Path)$(KddName).SY_,  SIZE=50000, RENAME=$(KddName).SYS
[ProductType]
STF_PRODUCT  = Winnt
STF_PLATFORM = I386
[GeneralConstants]
from = ""
to   = ""
ExitCodeOk     = 0
ExitCodeCancel = 1
ExitCodeFatal  = 2
KeyNull         = ""
MAXIMUM_ALLOWED   = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct      = ""
KeyParameters   = ""
TRUE            = 1
FALSE           = 0
NoTitle         = 0
ExitState   = "Active"
OldVersionExisted = $(FALSE)
DriverPath      = $(!STF_NTPATH)\drivers
[FileConstantsENG]
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
"Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"
FunctionTitle = $(FuncTitle)
ProductSoftwareDescription = $(ProdSoftwareDescription)
ProductHardwareDescription = $(ProdHardwareDescription)
ConnectionList  = {}
ConnectionValues = {}
[date]
Now = {} ? $(!LIBHANDLE) GetSystemDate
[Source Media Descriptions]
1 = $(Disk1) , TAGFILE = d100disk
[Signature]
FileType = MICROSOFT_DRVLIB_FILE
[GetSignature]
read-syms Signature
return $(FileType)
[Identify]
read-syms Identification
set Status     = STATUS_SUCCESSFUL
set Identifier = $(OptionType)
set Media      = #("Source Media Descriptions", 1, 1)
Return $(Status) $(Identifier) $(Media)
[ReturnOptions]
set Status        = STATUS_FAILED
set OptionList     = {}
set OptionTextList = {}
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) in $(LanguageList)
ifstr(i) $($1) == ""
goto returnoptions
endif
set PlatformList = ^(PlatformsSupported, 1)
Ifcontains(i) $($1) in $(PlatformList)
goto returnoptions
else
set Status = STATUS_NOTSUPPORTED
goto finish_ReturnOptions
endif
else
set Status = STATUS_NOLANGUAGE
goto finish_ReturnOptions
endif
returnoptions = +
set OptionList     = ^(Options, 1)
set OptionTextList = ^(OptionsText$($0), 1)
set Status         = STATUS_SUCCESSFUL
finish_ReturnOptions = +
Return $(Status) $(OptionList) $(OptionTextList)
[InstallOption]
set Status   = STATUS_FAILED
set Option   = $($1)
set SrcDir   = $($2)
set AddCopy  = $($3)
set DoCopy   = $($4)
set DoConfig = $($5)
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) NOT-IN $(LanguageList)
Return STATUS_NOLANGUAGE
endif
set-subst LF = "\n"
read-syms GeneralConstants
read-syms FileConstants
ifstr(i) $(!NTN_Origination) == "NCPA"
set Continue = "OK"
endif
read-syms FileConstants$(!STF_LANGUAGE)
detect date
set-title  $(FunctionTitle)
set CurrentVersionValue = ""
OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows NT\CurrentVersion" $(!REG_KEY_READ) KeyWinNT
ifstr(i) $(KeyWinNT) != ""
GetRegValue $(KeyWinNT) "CurrentVersion" CurrentVersionValue
CloseRegKey $(KeyWinNT)
endif
set m_WinNTVersion = *($(CurrentVersionValue),4)
set to   = Begin
set from = Begin
ifcontains(i) $(m_WinNTVersion) in {"3.50", "3.51"}
Shell $(UtilityInf), GetBusTypeNum
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
Set PlatformList = ^(PlatformsSupported, 1)
Set MachineType = *($(PlatformList), $($R1))
else
Set MachineType = $(!STF_BUSTYPE)
endif
set CommonStatus = STATUS_SUCCESSFUL
EndWait
Begin = +
Set ActivateDetection = FALSE
Ifstr(i) $(!NTN_InstallMode) == deinstall
set StartLabel = removeadapter
else-Ifstr(i) $(!NTN_InstallMode) == Update
set StartLabel = UpgradeSoftware
else-Ifstr(i) $(!NTN_InstallMode) == bind
set StartLabel = bindingadapter
else-Ifstr(i) $(!NTN_InstallMode) == configure
set ActivateDetection = TRUE
set StartLabel = configureadapter
ifstr(i) $(MachineType) == "MCA"
Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
else
Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_HARDWARE
endif
set Error = $($R0)
set from = end
set to = end
goto nonfatalinfo
endif
Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
set from = end
set to = end
goto nonfatalinfo
endif
else
set ActivateDetection = TRUE
set StartLabel = installadapter
set OEM_ABANDON_OPTIONS = {}
set OEM_ABANDON_SOFTWARE = FALSE
set OEM_ABANDON_ON = TRUE
endif
Set DetectedCard = FALSE
Ifstr(i) $(ActivateDetection) != TRUE
Goto $(StartLabel)
Endif
ifstr(i) $(MachineType) == "MCA"
goto CheckForMCA
endif
set IRQValue = *($(IRQList), 2)
set IOAddrValue = *($(IOAddrList), 1)
set IOReadyValue = *($(IOReadyList), 2)
set TransceiverValue = *($(TransceiverList), 4)
Ifstr(i) $(!STF_NCDETECT) == YES
Ifstr(i) $(!STF_NCOPTION) == $(Option)
Set DetectedCard = TRUE
Endif
Endif
Shell "" DebugConfiguration "After parameter querying"
Set from = $(fatal)
Set to = $(fatal)
Goto $(StartLabel)
installadapter = +
Shell "", AllowSoftwareUpgrade
Set ASUStatus = $($R0)
ifstr(i) $(ASUStatus) == "FALSE"
goto end
endif
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) != $(KeyNull)
CloseRegKey $(KeyProduct)
ifstr(i) !(NTN_RegBase) == $(ProductKeyName)
Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+
$(ProductVersion)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
goto end
else
Shell $(UtilityInf), CardExistedDlg
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) != "OK"
goto end
endif
set OldVersionExisted = $(TRUE)
endif
endif
ifcontains(i) $(m_WinNTVersion) in {"3.50", "3.51"}
Ifstr(i) $(DetectedCard) != TRUE
Goto adaptersetup
Endif
else
Goto adaptersetup
end
CheckForMCA = +
StartWait
Shell $(UtilityInf), MCAFindBus, $(EE16_1BYTE), $(EE16_2BYTE)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto CheckForISA
endif
ifstr $($R0) != "NO_ERROR"
goto CheckForISA
endif
ifstr(i) $($R1) == {}
set Error = $(CANNOT_FIND_ANY_CARD)
set CommonStatus = USER_CANCEL
set from = "end"
goto nonfatal
endif
set AdapterList = $($R1)
goto skipoptions
CheckForISA = +
Shell $(ParamInf) Param_QueryCard $(!STF_NCDETCARD)
EndWait
Ifstr(i) $($R0) != STATUS_SUCCESSFUL
Goto adaptersetup
Endif
Set DetectedParams = $($R1)
Shell $(ParamInf) Param_SetDefaults $(DetectedParams)
goto adaptersetup
configureadapter = +
ifstr(i) $(Option) == "ATEAMADAPTER"
Ifstr $(KeyProduct) == $(KeyNull)
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
goto fatalregistry
Endif
Endif
GetRegValue $(KeyProduct),"ServiceName", AdapterServiceKey
set AdapterServiceKey = *($(AdapterServiceKey),4)
LoadLibrary $(Disk1) $(!STF_WINDOWSSYSPATH)\$(DllName).dll DllLibHandle
LibraryProcedure DllExitStr $(DllLibHandle) AftCM
FreeLibrary $(DllLibHandle)
ifstr(i) $(DllExitStr) == "nochange"
CloseRegKey $(AdapterServiceKey)
CloseRegKey $(KeyProduct)
set CommonStatus = STATUS_USERCANCEL
goto successful
endif
Ifstr $(KeyProduct) == $(KeyNull)
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
goto fatalregistry
Endif
Endif
Shell $(UtilityInf) FindService, $(KeyProduct)
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Goto ShellCodeError
Endif
Ifstr(i) $($R0) != NO_ERROR
Goto fatalregistry
endif
Set KeyParameters = $($R2)
CloseRegKey $($R1)
Ifstr $(KeyParameters) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
goto fatalregistry
endif
set OldVersionExisted = $(TRUE)
set ValueName = ""
set ValueData = ""
set ValueStr  = ""
set ValueList = {}
EnumRegValue $(KeyParameters) ValueList
ForListDo $(ValueList)
set ValueItem = $($)
set ValueName = *($(ValueItem),1)
set ValueData = *($(ValueItem),4)
Ifstr(i) $(ValueName) == "CheckTime"
set CheckTimeValue = $(ValueData)
else-ifstr(i) $(ValueName) == "DisableTime"
set DisableTimeValue = $(ValueData)
else-ifstr(i) $(ValueName) == "IdleTime"
set IdleTimeValue = $(ValueData)
else-ifstr(i) $(ValueName) == "ProbeTime"
set ProbeTimeValue = $(ValueData)
else-ifstr(i) $(ValueName) == "BalanceInterval"
set BalanceIntervalValu = $(ValueData)
else-ifstr(i) $(ValueName) == "TotalAdapters"
set TotalAdaptersValue = $(ValueData)
else-ifstr(i) $(ValueName) == "Mode"
set TeamModeValue = $(ValueData)
endif
EndForListDo
Shell $(ParamInf) Param_SaveValues
Set CurrParamSettings = $($R0)
Set RunConfigManager = $(FALSE)
goto writeparameters
endif
Ifstr $(KeyProduct) == $(KeyNull)
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
goto fatalregistry
Endif
Endif
GetRegValue $(KeyProduct),"ServiceName", AdapterServiceKey
set AdapterServiceKey = *($(AdapterServiceKey),4)
Shell $(UtilityInf) FindService, $(KeyProduct)
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Goto ShellCodeError
Endif
Ifstr(i) $($R0) != NO_ERROR
Goto fatalregistry
endif
Set KeyParameters = $($R2)
CloseRegKey $($R1)
Ifstr $(KeyParameters) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
goto fatalregistry
endif
set OldVersionExisted = $(TRUE)
set ValueName = ""
set ValueData = ""
set ValueStr  = ""
set ValueList = {}
ifstr(i) $(Option) == "E100BEXP"
goto RunProset
goto successful
RunProset = +
RunProgram ExitCode "" "" $(!STF_WINDOWSSYSPATH)\$(ExeName).EXE $(AdapterServiceKey)
Ifstr(i) $(!NTN_InstallMode) != configure
ifint $(ExitCode) == 20
set Option = "ATEAMADAPTER"
goto install_ateam
endif
ifint $(ExitCode) >= 2
set CommonStatus = STATUS_USERCANCEL
goto abandon
endif
else
ifint $(ExitCode) == 0
set CommonStatus = STATUS_NO_EFFECT
endif
ifint $(ExitCode) == 2
set CommonStatus = STATUS_NO_EFFECT
endif
ifint $(ExitCode) == 20
set Option = "ATEAMADAPTER"
goto install_ateam
endif
endif
goto successful
adaptersetup = +
Shell "" DebugConfiguration "before displaying dialog"
Shell "" DebugConfiguration "After List Translation"
Shell $(ParamInf) Param_ParameterConfidence
Ifstr(i) $($R0) != STATUS_SUCCESSFUL
Goto adapteroptions
Endif
Ifstr(i) $(DetectedCard) == TRUE
Ifstr(i) $(!STF_INSTALL_MODE) != CUSTOM
Goto adapterverify
Endif
Endif
adapteroptions = +
Set from = adapteroptions
adapterverify = +
ifcontains(i) $(m_WinNTVersion) not-in {"3.50", "3.51"}
Goto skipoptions
endif
Shell "" DebugConfiguration "after running dialog"
Ifstr(i) $(DetectedCard) != TRUE
Goto skipoptions
Endif
Shell $(ParamInf) Param_VerifyCard $(!STF_NCDETCARD)
Ifstr(i) $($R0) == STATUS_SUCCESSFUL
Goto skipoptions
Endif
Set from = adapteroptions
Set to = skipoptions
Shell $(UtilityInf),RegistryErrorString,VERIFY_WARNING
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
Goto Warning
install_ateam = +
LoadLibrary $(Disk1) $(!STF_WINDOWSSYSPATH)\$(DllName).dll RegDllLibHandle
LibraryProcedure DllExitStr $(RegDllLibHandle) AddTeam $(STF_CONTEXTINFNAME), $(!NCPA_HANDLE), $(!STF_HWND), $(Manufacturer),  +
$(ProductATeamSoftwareName),   $(ProductATeamTransportName),   $(ProductSoftwareName),    $(ProductATeamSoftwareTitle),    +
$(ProductATeamTransportTitle),  $(ProductATeamTransportDescription),  $(ProductATeamHardwareTitle),    $(ProductATeamHardwareDescription), +
$(NetEventDLLAft)
FreeLibrary $(RegDllLibHandle)
Set RunConfigManager = $(TRUE)
goto writeparameters
skipoptions = +
ifstr(i) $(Option) == "ATEAMADAPTER"
goto install_ateam
endif
ifint $(OldVersionExisted) == $(TRUE)
ifstr(i) $(!NTN_InstallMode) == configure
Set RunConfigManager = $(FALSE)
goto writeparameters
endif
endif
StartWait
ifint $(OldVersionExisted) == $(FALSE)
ifstr(i) $(!NTN_InstallMode) == "install"
Ifstr(i) $(DoCopy) == "YES"
Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Goto ShellCodeError
Else-Ifstr(i) $($R0) == STATUS_FAILED
Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
Goto successful
Endif
Set SrcDir = $($R1)
Endif
debug-output "Install-option "
set FileToCheck = $(SrcDir)$(Path)$(AftName).SY_
LibraryProcedure AftFilePresent,$(!LIBHANDLE), CheckFileExistance $(FileToCheck)
install "Install-Option"
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
endif
endif
ifcontains(i) $(m_WinNTVersion) in {"3.50", "3.51"}
Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName), +
$(ProductSoftwareName), +
$(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), +
$(ProductSoftwareImagePathNDIS3), "kernel", "NDIS", {}, "",+
$(NetEventDLL)
else
debug-output " addsoftware comp "
Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName), +
$(ProductSoftwareName), +
$(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), +
$(ProductSoftwareImagePathNDIS4), "kernel", "NDIS", {}, "",+
$(NetEventDLL)
endif
Set OEM_ABANDON_SOFTWARE = TRUE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
set KeyProduct      = $($R1)
Set SoftNetRulesKey = $($R2)
CloseRegKey $($R3)
CloseRegKey $($R4)
CloseRegKey $($R5)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
goto fatalregistry
endif
set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
{MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
{MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
{Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Shell  $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
goto fatalregistry
endif
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
{use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
{bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
{bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Shell  $(UtilityInf), AddValueList, $(SoftNetRulesKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
goto fatalregistry
endif
endif
set CompStr = $(Manufacturer)","$(ProductSoftwareName)","$(AftPrefix)","$(SubVendorID)","$(CheckSum)
set CompList = { {$(CompatibleNum), $(NoTitle), $(!REG_VT_SZ),$(CompStr)} }
set KeySoft = ""
set KeyComp = ""
OpenRegKey $(!REG_H_LOCAL) ""  "SYSTEM\CurrentControlSet\Services\" $(MAXIMUM_ALLOWED) KeySoft
OpenRegKey $(KeySoft) "" "AFTRegistration" $(MAXIMUM_ALLOWED) KeyComp
Ifstr $(KeyComp) == $(KeyNull)
CreateRegKey $(KeySoft) {"AFTRegistration",0,GenericClass} "" +
$(MAXIMUM_ALLOWED) "" KeyComp
endif
Shell  $(UtilityInf), AddValueList, $(KeyComp), $(CompList)
CloseRegKey $(KeyComp)
CloseRegKey $(KeySoft)
set NTDetected = $(TRUE)
set Vendor =  32902
set CFID   =  4649
Shell "", CheckPCISubVendorSystemID
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R0) == {}
Shell "Subroutn.Inf" SetupMessage $(!STF_LANGUAGE) "FATAL" "Setup was unable to detect an Intel EtherExpress PRO Adapter in your system.  Install the adapter and try again."
goto setfailed
endif
set AdapterList = $($R0)
Shell "", FindOutdatedRegistryEntries
ifint $($R0) == -1
LoadLibrary $(Disk1) $(!STF_WINDOWSSYSPATH)\$(DllName).dll DllLibHandle
LibraryProcedure DllExitStr $(DllLibHandle) AddSlots
FreeLibrary $(DllLibHandle)
endif
ForListDo $(AdapterList)
Set InstallCard = "YES"
ifint $(NTDetected) == $(TRUE)
set DetectedBusNum = *($($),1)
set DetectedSlotNum = *($($),2)
Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(DetectedBusNum), +
$(DetectedSlotNum), $(ProductHardware$(Option)Description), $(ProductHardwareName)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr $($R0) != "NO_ERROR"
set Error = $($R0)
goto fatal
endif
ifstr(i) $($R1) == "YES"
set InstallCard = "NO"
endif
endif
ifstr(i) $(InstallCard) == "NO"
set detmsg = "An "$(ProductHardwareTitle)" at PCI Bus "$(DetectedBusNum)" PCI Slot "$(DetectedSlotNum)" is already installed!"
goto det_bypass
else
Debug-Output "*** Installing E100B at $(DetectedBusNum):$(DetectedSlotNum)!"
Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
ifint $($R4) != -1
Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
endif
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
EndWait
CloseRegKey $($R1)
CloseRegKey $($R2)
CloseRegKey $($R3)
goto fatalregistry
endif
Set MyNetCardKey       = $($R1)
Set MyNetRuleKey       = $($R2)
Set MyParameterKey     = $($R3)
set AdapterNumber      = $($R4)
set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
{Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+
{ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Shell  $(UtilityInf), AddValueList, $(MyNetCardKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set BusNumber = $(DetectedBusNum)
set SlotNum = $(DetectedSlotNum)
OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows NT\CurrentVersion" $(!REG_KEY_READ) KeyWinNT
ifstr(i) $(KeyWinNT) != ""
GetRegValue $(KeyWinNT) "CurrentVersion" CurrentVersionValue
endif
CloseRegKey $(KeyWinNT)
set m_WinNTVersion = *($(CurrentVersionValue),4)
Debug-Output "Setting PerfOpts Defaults 3.51"
Ifstr(i) $(!STF_PROCESSOR) == "I586"
Debug-Output "Found Pentium"
set myPerfOptimsValue = 2
else
Debug-Output "Found nonPentium"
set myPerfOptimsValue = 0
endif
ifcontains(i) $(m_WinNTVersion) not-in {"3.50", "3.51"}
Debug-Output "Setting PerfOpts for NT 4.X"
Ifstr(i) $(!STF_PROCESSOR) == "I586"
Debug-Output "Found Pentium"
set myPerfOptimsValue = 2
else
Debug-Output "Found nonPentium"
set myPerfOptimsValue = 0
endif
endif
Set NewValueList =  {+
{Adaptive_IFS,  $(NoTitle),   $(!REG_VT_DWORD),   1}, +
{BusNumber,     $(NoTitle),   $(!REG_VT_DWORD),   $(BusNumber)},+
{BusType,       $(NoTitle),   $(!REG_VT_DWORD),   5)},+
{BusTypeLocal,  $(NoTitle),   $(!REG_VT_DWORD),   5}, +
{ForceDpx,      $(NoTitle),   $(!REG_VT_DWORD),   0}, +
{MapRegisters,  $(NoTitle),   $(!REG_VT_DWORD),   64}, +
{MediaType,     $(NoTitle),   $(!REG_VT_DWORD),   1 },+
{MsPciScan,     $(NoTitle),   $(!REG_VT_DWORD),   1 },+
{NetworkAddress,$(NoTitle),   $(!REG_VT_SZ),      0}, +
{NumCoalesce,   $(NoTitle),   $(!REG_VT_DWORD),   8}, +
{NumRfd,        $(NoTitle),   $(!REG_VT_DWORD),   32}, +
{NumTbdPerTcb,  $(NoTitle),   $(!REG_VT_DWORD),   12}, +
{NumTcb,        $(NoTitle),   $(!REG_VT_DWORD),   16}, +
{PerfOptims,    $(NoTitle),   $(!REG_VT_DWORD),   $(myPerfOptimsValue)},+
{RxDmaCount,    $(NoTitle),   $(!REG_VT_DWORD),   0}, +
{RxFifo,        $(NoTitle),   $(!REG_VT_DWORD),   8}, +
{SlotNumber,    $(NoTitle),   $(!REG_VT_DWORD),   $(SlotNum)},+
{Speed,         $(NoTitle),   $(!REG_VT_DWORD),   0}, +
{Threshold,     $(NoTitle),   $(!REG_VT_DWORD),   16}, +
{TxDmaCount,    $(NoTitle),   $(!REG_VT_DWORD),   0}, +
{TxFifo,        $(NoTitle),   $(!REG_VT_DWORD),   8}, +
{Txmitwait,     $(NoTitle),   $(!REG_VT_DWORD),   1}, +
{UcodeSW,       $(NoTitle),   $(!REG_VT_DWORD),   1}, +
{UnderrunRetry, $(NoTitle),   $(!REG_VT_DWORD),   1} +
}
Shell  $(UtilityInf), AddValueList, $(MyParameterKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+
{bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Shell  $(UtilityInf), AddValueList, $(MyNetRuleKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(MyNetCardKey)
CloseRegKey $(MyNetRuleKey)
endif
det_bypass = +
EndForListDo
Set RunConfigManager = $(FALSE)
goto writeparameters
writeparameters = +
ifstr(i) $(Option) == "ATEAMADAPTER"
Debug-Output "WriteParameters ATEAMADAPTER KeyParameters $(KeyParameters)"
Set NewValueList = {+
{CheckTime,     $(NoTitle), $(!REG_VT_DWORD), $(CheckTimeValue)},+
{DisableTime,   $(NoTitle), $(!REG_VT_DWORD), $(DisableTimeValue)},+
{IdleTime,      $(NoTitle), $(!REG_VT_DWORD), $(IdleTimeValue)},+
{ProbeTime,     $(NoTitle), $(!REG_VT_DWORD), $(ProbeTimeValue)},+
{BalanceInterval, $(NoTitle),$(!REG_VT_DWORD), $(BalanceIntervalValu)},+
{Mode,			$(NoTitle), $(!REG_VT_DWORD), $(TeamModeValue)},+
{TotalAdapters, $(NoTitle), $(!REG_VT_DWORD), $(TotalAdaptersValue)} +
}
Shell  $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
ifstr(i) $(!STF_GUI_UNATTENDED) == "YES"
Shell $(UtilityInf),AddDefaultNetCardParameters,$(KeyParameters)
endif
CloseRegKey $(KeyParameters)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
ifint $(RunConfigManager) == $(TRUE)
LoadLibrary $(Disk1) $(!STF_WINDOWSSYSPATH)\$(DllName).dll DllLibHandle
LibraryProcedure DllExitStr $(DllLibHandle) AftCM
FreeLibrary $(DllLibHandle)
endif
goto successful
endif
Shell $(UtilityInf), GetBusTypeNum
set BusTypeNum = $($R1)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
Set IOAddrValue = *($(IOAddrValues), ~($(IOAddrList),$(IOAddrValue)))
Shell "" DebugConfiguration "Before Writing Parameters"
set NewValueList = {{Eid,$(NoTitle),$(!REG_VT_DWORD),0)}}
OpenRegKey $(!REG_H_LOCAL) "" $(PROSetKeyName)"\"Adapters $(MAXIMUM_ALLOWED) PROSetAdapterKey
ifstr $(PROSetAdapterKey) == $(KeyNull)
CreateRegKey $(!REG_H_LOCAL) {$(PROSetKeyName)"\"Adapters,0,GenericClass} "" +
$(MAXIMUM_ALLOWED) "" PROSetAdapterKey
ifstr $(PROSetAdapterKey) == $(KeyNull)
Shell "Subroutn.Inf" SetupMessage $(!STF_LANGUAGE) "NONFATAL" CreateRegAdapterFailed
goto fatalregistry
endif
endif
set NewValueList = {{$(PROSetAdapterName),$(NoTitle), $(!REG_VT_SZ), $(Adapter)}}
Shell  $(UtilityInf), AddValueList, $(PROSetAdapterKey), $(NewValueList)
CloseRegKey $(PROSetAdapterKey)
OpenRegKey $(!REG_H_LOCAL) "" $(PROSetKeyName)"\"$(PROSetAdapterName) $(MAXIMUM_ALLOWED) PROSetAdapterKey
ifstr $(PROSetAdapterKey) == $(KeyNull)
CreateRegKey $(!REG_H_LOCAL) {$(PROSetKeyName)"\"$(PROSetAdapterName),0,GenericClass} "" +
$(MAXIMUM_ALLOWED) "" PROSetAdapterKey
ifstr $(PROSetAdapterKey) == $(KeyNull)
Shell "Subroutn.Inf" SetupMessage $(!STF_LANGUAGE) "NONFATAL" CreateRegEPRO10Failed
goto fatalregistry
endif
endif
set NewValueList = {{Configure,$(NoTitle),$(!REG_VT_SZ),$(Configure)},+
{Detect,$(NoTitle),$(!REG_VT_SZ),$(Detect)},+
{Diagnose,$(NoTitle),$(!REG_VT_SZ),$(Diagnose)},+
{DLL,$(NoTitle),$(!REG_VT_SZ),$(DLL)},+
{Help,$(NoTitle),$(!REG_VT_SZ),$(Help)},+
{RegistryKey,$(NoTitle),$(!REG_VT_SZ),$(RegistryKey)},+
{AdapterDescription,$(NoTitle),$(!REG_VT_SZ),$(AdapterDescription)},+
{InstallAnyway,$(NoTitle),$(!REG_VT_SZ),$(InstallAnyway)},+
{DeviceExist,$(NoTitle),$(!REG_VT_SZ),$(DeviceExist)},+
{GetExtendedFeatures,$(NoTitle),$(!REG_VT_SZ),$(GetExtendedFeatures)},+
{Summary,$(NoTitle),$(!REG_VT_SZ),$(Summary)}}
Shell  $(UtilityInf), AddValueList, $(PROSetAdapterKey), $(NewValueList)
CloseRegKey $(PROSetAdapterKey)
OpenRegKey $(!REG_H_LOCAL) "" $(PROSetKeyName)"\"$(PROSetAdapterName)"\"$(PROSetParameters) $(MAXIMUM_ALLOWED) PROSetAdapterKey
ifstr $(PROSetAdapterKey) == $(KeyNull)
CreateRegKey $(!REG_H_LOCAL) {$(PROSetKeyName)"\"$(PROSetAdapterName)"\"$(PROSetParameters),0,GenericClass} "" +
$(MAXIMUM_ALLOWED) "" PROSetAdapterKey
ifstr $(PROSetAdapterKey) == $(KeyNull)
Shell "Subroutn.Inf" SetupMessage $(!STF_LANGUAGE) "NONFATAL" CreateRegEPRO10Failed
goto fatalregistry
endif
endif
set NewValueList = { +
{BusNumber,$(NoTitle),$(!REG_VT_SZ),$(BusNumberStr)}, +
{BusType,$(NoTitle),$(!REG_VT_SZ),$(BusType)}, +
{BusTypeLocal,$(NoTitle),$(!REG_VT_SZ),$(BusTypeLocal)}, +
{Eid,$(NoTitle),$(!REG_VT_SZ),$(Eid)}, +
{Fifo,$(NoTitle),$(!REG_VT_SZ),$(Fifo)}, +
{ForceDpx,$(NoTitle),$(!REG_VT_SZ),$(ForceDpx)}, +
{MapRegisters,$(NoTitle),$(!REG_VT_SZ),$(MapRegisters)}, +
{MediaType,$(NoTitle),$(!REG_VT_SZ),$(MediaType)}, +
{MsPciScan,$(NoTitle),$(!REG_VT_SZ),$(MsPciScan)}, +
{NumCoalesce,$(NoTitle),$(!REG_VT_SZ),$(NumCoalesce)}, +
{NumRfd,$(NoTitle),$(!REG_VT_SZ),$(NumRfd)}, +
{NumTbd,$(NoTitle),$(!REG_VT_SZ),$(NumTbd)}, +
{NumTbdPerTcb,$(NoTitle),$(!REG_VT_SZ),$(NumTbdPerTcb)}, +
{NumTcb,$(NoTitle),$(!REG_VT_SZ),$(NumTcb)}, +
{Off,$(NoTitle),$(!REG_VT_SZ),$(Off)}, +
{On,$(NoTitle),$(!REG_VT_SZ),$(On)}, +
{RxDmaCount,$(NoTitle),$(!REG_VT_SZ),$(RxDmaCount)}, +
{RxFifo,$(NoTitle),$(!REG_VT_SZ),$(RxFifo)}, +
{Slot,$(NoTitle),$(!REG_VT_SZ),$(Slot)}, +
{Speed,$(NoTitle),$(!REG_VT_SZ),$(Speed)}, +
{Threshold,$(NoTitle),$(!REG_VT_SZ),$(Threshold)}, +
{TxDmaCount,$(NoTitle),$(!REG_VT_SZ),$(TxDmaCount)}, +
{TxFifo,$(NoTitle),$(!REG_VT_SZ),$(TxFifo)}, +
{UnderrunRetry,$(NoTitle),$(!REG_VT_SZ),$(UnderrunRetry)}, +
{PerfOptims,$(NoTitle),$(!REG_VT_SZ),$(PerfOptims)}, +
{UcodeSW,$(NoTitle),$(!REG_VT_SZ),$(UcodeSW)}, +
{Adaptive_IFS,$(NoTitle),$(!REG_VT_SZ),$(Adaptive_IFS)}, +
{NetworkAddress,$(NoTitle),$(!REG_VT_SZ),$(NetworkAddress)}, +
{Txmitwait,$(NoTitle),$(!REG_VT_SZ),$(Txmitwait)} +
}
Shell  $(UtilityInf), AddValueList, $(PROSetAdapterKey), $(NewValueList)
CloseRegKey $(PROSetAdapterKey)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
EndWait
Install "Install-PROSet"
ifstr(i) $(!NTN_Origination) == "INSTALL"
ifstr(i) $(!STF_GUI_UNATTENDED) == YES
RunProgram DummyExitCode "" "" $(!STF_WINDOWSSYSPATH)\$(ExeName).EXE /BATCH $(AdapterServiceKey)
else
RunProgram DummyExitCode "" "" $(!STF_WINDOWSSYSPATH)\$(ExeName).EXE $(AdapterServiceKey)
endif
endif
Ifstr(i) $(!NTN_InstallMode) != configure
ifint $(ExitCode) >= 2
set CommonStatus = STATUS_USERCANCEL
goto abandon
endif
else
ifint $(ExitCode) == 0
set CommonStatus = STATUS_NO_EFFECT
endif
ifint $(ExitCode) == 2
set CommonStatus = STATUS_NO_EFFECT
endif
endif
goto successful
bindingadapter = +
LoadLibrary $(Disk1) $(!STF_WINDOWSSYSPATH)\$(DllName).dll RegDllLibHandle
LibraryProcedure DllExitStr $(RegDllLibHandle) BindingReview  $(Option), $(ProductSoftwareName),  $(ProductATeamTransportName), "iVLANProtocol", $(ProductATeamTransportName)
FreeLibrary $(RegDllLibHandle)
goto successful
removeadapter = +
Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
else-ifstr(i) $(Option) == "ATEAMADAPTER"
LoadLibrary $(Disk1) $(!STF_WINDOWSSYSPATH)\$(DllName).dll RegDllLibHandle
LibraryProcedure DllExitStr $(RegDllLibHandle) RemoveTeam $(!NCPA_HANDLE) $(!STF_HWND) $(!NTN_RegBase) $(Manufacturer) $(ProductATeamHardwareName) $(ProductATeamTransportName) $(ProductATeamSoftwareName) $(ProductSoftwareName)
FreeLibrary $(RegDllLibHandle)
ifstr(i) $(DllExitStr) == "NO_ERROR"
goto end
endif
ifstr(i) $(DllExitStr) == "FATAL"
goto fatalregistry
endif
goto end
else
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), $(ProductSoftwareName), $(!NTN_RegBase)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
endif
endif
endif
goto end
UpgradeSoftware = +
Shell "", AllowSoftwareUpgrade
Set ASUStatus = $($R0)
ifstr(i) $(ASUStatus) == "FALSE"
goto end
endif
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) != $(KeyNull)
Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set !UG_Filename = $($R0)
set FileToCheck = $(SrcDir)$(Path)$(AftName).SY_
LibraryProcedure AftFilePresent,$(!LIBHANDLE), CheckFileExistance $(FileToCheck)
install "Install-Update"
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
goto fatal
endif
OpenRegKey $(!REG_H_LOCAL) "" $(PROSetKeyName)"\"Adapters $(MAXIMUM_ALLOWED) PROSetAdapterKey
ifstr $(PROSetAdapterKey) == $(KeyNull)
CreateRegKey $(!REG_H_LOCAL) {$(PROSetKeyName)"\"Adapters,0,GenericClass} "" +
$(MAXIMUM_ALLOWED) "" PROSetAdapterKey
ifstr $(PROSetAdapterKey) == $(KeyNull)
Shell "Subroutn.Inf" SetupMessage $(!STF_LANGUAGE) "NONFATAL" CreateRegAdapterFailed
goto fatalregistry
endif
endif
set NewValueList = {{$(PROSetAdapterName),$(NoTitle), $(!REG_VT_SZ), $(Adapter)}}
Shell  $(UtilityInf), AddValueList, $(PROSetAdapterKey), $(NewValueList)
CloseRegKey $(PROSetAdapterKey)
OpenRegKey $(!REG_H_LOCAL) "" $(PROSetKeyName)"\"$(PROSetAdapterName) $(MAXIMUM_ALLOWED) PROSetAdapterKey
ifstr $(PROSetAdapterKey) == $(KeyNull)
CreateRegKey $(!REG_H_LOCAL) {$(PROSetKeyName)"\"$(PROSetAdapterName),0,GenericClass} "" +
$(MAXIMUM_ALLOWED) "" PROSetAdapterKey
ifstr $(PROSetAdapterKey) == $(KeyNull)
Shell "Subroutn.Inf" SetupMessage $(!STF_LANGUAGE) "NONFATAL" CreateRegEPRO10Failed
goto fatalregistry
endif
endif
set NewValueList = {{Configure,$(NoTitle),$(!REG_VT_SZ),$(Configure)},+
{Detect,$(NoTitle),$(!REG_VT_SZ),$(Detect)},+
{Diagnose,$(NoTitle),$(!REG_VT_SZ),$(Diagnose)},+
{DLL,$(NoTitle),$(!REG_VT_SZ),$(DLL)},+
{Help,$(NoTitle),$(!REG_VT_SZ),$(Help)},+
{RegistryKey,$(NoTitle),$(!REG_VT_SZ),$(RegistryKey)},+
{AdapterDescription,$(NoTitle),$(!REG_VT_SZ),$(AdapterDescription)},+
{InstallAnyway,$(NoTitle),$(!REG_VT_SZ),$(InstallAnyway)},+
{DeviceExist,$(NoTitle),$(!REG_VT_SZ),$(DeviceExist)},+
{GetExtendedFeatures,$(NoTitle),$(!REG_VT_SZ),$(GetExtendedFeatures)},+
{Summary,$(NoTitle),$(!REG_VT_SZ),$(Summary)}}
Shell  $(UtilityInf), AddValueList, $(PROSetAdapterKey), $(NewValueList)
CloseRegKey $(PROSetAdapterKey)
Shell "", FindOutdatedRegistryEntries
ifint $($R0) == -1
LoadLibrary $(Disk1) $(!STF_WINDOWSSYSPATH)\$(DllName).dll DllLibHandle
LibraryProcedure DllExitStr $(DllLibHandle) AddSlots
FreeLibrary $(DllLibHandle)
endif
SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}
CloseRegKey $(KeyProduct)
else
goto fatalregistry
endif
goto end
successful = +
goto end
abandon = +
ForListDo $(OEM_ABANDON_OPTIONS)
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
$(ProductSoftwareName), $($)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
EndForListDo
Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName), FALSE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
endif
goto end
warning = +
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(to)
else-ifstr(i) $($R1) == "CANCEL"
goto $(from)
else
goto "end"
endif
nonfatalinfo = +
Set Severity = STATUS
Set CommonStatus = STATUS_USERCANCEL
goto nonfatalmsg
nonfatal = +
Set Severity = NONFATAL
goto nonfatalmsg
nonfatalmsg = +
ifstr(i) $(Error) == ""
Set Severity = NONFATAL
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(from)
else
goto "end"
endif
fatalregistry = +
Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
fataldetect = +
Shell $(UtilityInf),RegistryErrorString,CANNOT_DETECT
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
fatal = +
ifstr(i) $(Error) == ""
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
goto setfailed
ShellCodeError = +
set DlgType      = "MessageBox"
set STF_MB_TITLE = "Error: "$(FunctionTitle)
set STF_MB_TEXT  = "Shell Code Error"
set STF_MB_TYPE  = 1
set STF_MB_ICON  = 3
set STF_MB_DEF   = 1
ui start "Error Message"
goto setfailed
setfailed = +
set CommonStatus = STATUS_FAILED
ifstr(i) $(OEM_ABANDON_ON) == TRUE
set OEM_ABANDON_ON = FALSE
goto abandon
endif
goto end
end = +
goto term
term = +
Return $(CommonStatus)
[BindingsReview]
set Option   = $($1)
set SrcDir   = $($2)
set AddCopy  = $($3)
set DoCopy   = $($4)
set DoConfig = $($5)
set Status = $($R0)
Return $(Status)
[DebugConfiguration]
return
[Install-Option]
set STF_OVERWRITE = VERIFYSOURCEOLDER
set STF_VITAL = ""
ifstr(i) $(AddCopy) == "YES"
ifcontains(i) $(m_WinNTVersion) not-in {"3.50", "3.51"}
Ifstr(i) $(AftFilePresent) != "YES"
AddSectionFilesToCopyList Files-N3NDIS4 $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
else
AddSectionFilesToCopyList Files-N3NDIS4-iAFT $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
Endif
else
AddSectionFilesToCopyList Files-N3NDIS3 $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
endif
endif
ifstr(i) $(DoCopy) == "YES"
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
endif
Exit
[Install-Update]
set STF_VITAL        = ""
set STF_OVERWRITE    = "VERIFYSOURCEOLDER"
ifcontains(i) $(m_WinNTVersion) not-in {"3.50", "3.51"}
Ifstr(i) $(AftFilePresent) != "YES"
AddSectionFilesToCopyList Files-N3NDIS4 $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
else
AddSectionFilesToCopyList Files-N3NDIS4-iAFT $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
Endif
else
AddSectionFilesToCopyList Files-N3NDIS3 $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
endif
AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH)
AddSectionFilesToCopyList Files-Exe $(SrcDir)  $(!STF_WINDOWSSYSPATH)
AddSectionFilesToCopyList Files-Exe-Drivers $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
exit
[Install-PROSet]
set STF_VITAL        = ""
set STF_OVERWRITE    = "VERIFYSOURCEOLDER"
AddSectionFilesToCopyList Files-Exe $(SrcDir)  $(!STF_WINDOWSSYSPATH)
AddSectionFilesToCopyList Files-Exe-Drivers $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
exit
[CheckPCISubVendorSystemID]
read-syms GeneralConstants
read-syms FileConstants
set VendorID = 32902
set DeviceID = 4649
set MultiAdapter = "HARDWARE\Description\System\MultifunctionAdapter"
set InfoList = {}
OpenRegKey $(!REG_H_LOCAL) "" $(MultiAdapter) $(MAXIMUM_ALLOWED) KeyMultiAdapter
Ifstr $(KeyMultiAdapter) == $(KeyNull)
goto CheckPCISubVendorSystemID_return
endif
EnumRegKey $(KeyMultiAdapter) BusList
set BusNum = 0
set index = 0
ForListDo $(BusList)
OpenRegKey $(!REG_H_LOCAL) "" $(MultiAdapter)"\"$(index) $(MAXIMUM_ALLOWED) KeyMultiAdapterBus
GetRegValue $(KeyMultiAdapterBus) "Identifier" IdentifierInfo
ifstr(i) *($(IdentifierInfo),4) == "PCI"
set device = 0
next_device = +
ifint $(device) < 32
set function = 0
LibraryProcedure Result, $(!LIBHANDLE), GetPciInformation, $(BusNum), $(device), $(function)
ifint *($(Result),1) == 65535
Set-add device = $(device),1
goto next_device
endif
ifint *($(Result),1) == $(VendorID)
ifint *($(Result),2) == $(DeviceID)
Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(BusNum), +
$(device), "", "", "YES"
ifstr(i) $($R1) == "YES"
Set-add device = $(device),1
goto next_device
else
set InfoList  = >($(InfoList),{$(BusNum),$(device),$(function)})
endif
endif
endif
Set-add device = $(device),1
goto next_device
endif
finish_bus = +
set-add BusNum = $(BusNum),1
endif
set-add index = $(index),1
EndForListDo
CloseRegKey $(KeyMultiAdapter)
CheckPCISubVendorSystemID_return = +
debug-output " Infolist $(InfoList)"
return $(InfoList)
[AllowSoftwareUpgrade]
read-syms GeneralConstants
read-syms FileConstants
set StatusOfCheck = "TRUE"
set FileToCheck = $(SrcDir)$(Path)$(AftName).SY_
LibraryProcedure AftFilePresent,$(!LIBHANDLE), CheckFileExistance $(FileToCheck)
ifstr(i) $(AftFilePresent) == "NO"
return $(StatusOfCheck)
endif
OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows NT\CurrentVersion" $(!REG_KEY_READ) KeyWinNT
ifstr(i) $(KeyWinNT) != ""
GetRegValue $(KeyWinNT) "CurrentVersion" CurrentOSVersionValue
GetRegValue $(KeyWinNT) "CSDVersion" CurrentVersionValue
CloseRegKey $(KeyWinNT)
endif
set m_WinNTVersion = *($(CurrentOSVersionValue),4)
set m_WinNTSPVersion = *($(CurrentVersionValue),4)
ifcontains(i) $(m_WinNTVersion) in {"4.0"}
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\iAFT" $(MAXIMUM_ALLOWED) scanParamKeySvc
Ifstr $(scanParamKeySvc) != $(KeyNull)
CloseRegKey $(scanParamKeySvc)
ifstr(i) $(m_WinNTSPVersion) == ""
set StatusOfCheck = "Check 1"
else-Ifstr(i) $(m_WinNTSPVersion) == "Service Pack"
set StatusOfCheck = "Check 1"
else-Ifstr(i) $(m_WinNTSPVersion) == "Service Pack 1"
set StatusOfCheck = "Check 1"
else-Ifstr(i) $(m_WinNTSPVersion) == "Service Pack 2"
set StatusOfCheck = "Check 1"
else-Ifstr(i) $(m_WinNTSPVersion) == "Service Pack 3"
set StatusOfCheck = "Check 2"
Shell "Subroutn.Inf" SetupMessage $(!STF_LANGUAGE) "WARNING" "The Adapter Fault Tolerance drivers on your computer will be upgraded for maximum performance. "+
"This upgrade requires Microsoft's Service Pack 3.0 with hot fixes, or a later version of Service Pack. "+
"To use AFT, you must first download and install the software from Microsoft's web site, www.microsoft.com. "+
"For more information, go to Intel's support web site, support.intel.com. Proceed?"
ifstr(i) $($R1) == "OK"
set StatusOfCheck = "TRUE"
else-ifstr(i) $($R1) == "CANCEL"
set StatusOfCheck = "FALSE"
endif
endif
ifstr(i) $(StatusOfCheck) == "Check 1"
set StatusOfCheck = "FALSE"
Shell "Subroutn.Inf" SetupMessage $(!STF_LANGUAGE) "FATAL" "The Adapter Fault Tolerance drivers for your computer have been upgraded for maximum performance. "+
"This upgrade requires Microsoft's Service Pack 3.0 with hot fixes, or a later version of Service Pack. "+
"This software was not detected on your computer. To use this feature, you must first download and install "+
"the software from Microsoft's web site, www.microsoft.com. For more information, go to Intel's support "+
"web site, support.intel.com."
endif
endif
endif
endif
return $(StatusOfCheck)
[FindOutdatedRegistryEntries]
read-syms GeneralConstants
read-syms FileConstants
set ReturnValue = 0
set scanstartnum = "1"
RegCheckjmp = +
Shell $(UtilityInf), FindNextNetworkCard, "e100b", $(scanstartnum)
ifstr $($R0) != $(KeyNull)
GetRegValue $($R0) "ServiceName" ValueList
set scanTargetService = *($(ValueList),4)
Debug-Output "scanTargetService: $(scanTargetService)"
CloseRegKey $($R0)
set scanstartnum = $($R1)
Shell $(UtilityInf), FindService, $(scanTargetService), "adapter"
ifstr $($R0) != $(KeyNull)
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\"$(scanTargetService)"\Parameters" $(MAXIMUM_ALLOWED) scanProtoKeySvc
Ifstr $(scanProtoKeySvc) != $(KeyNull)
GetRegValue $(scanProtoKeySvc) "Eid" EidValue
Ifstr $(EidValue) != $(KeyNull)
GetRegValue $(scanProtoKeySvc) "SlotNumber" SlotValue
Ifstr $(SlotValue) == $(KeyNull)
set ReturnValue = -1
endif
endif
endif
endif
goto RegCheckjmp
else
ifint $(scanstartnum) != "10"
set-add scanstartnum = $(scanstartnum), 1
goto RegCheckjmp
endif
endif
set HotPlugKeyName = "SOFTWARE\Compaq\Cpqrcmc\ClassDLLs\NicMiniport"
OpenRegKey $(!REG_H_LOCAL) "" $(HotPlugKeyName) $(MAXIMUM_ALLOWED) HotPlugKey
ifstr $(HotPlugKey) == $(KeyNull)
CreateRegKey $(!REG_H_LOCAL) {$(HotPlugKeyName),0,GenericClass} "" +
$(MAXIMUM_ALLOWED) "" HotPlugKey
ifstr $(HotPlugKey) != $(KeyNull)
set NewValueList = {{ClassID,$(NoTitle),$(!REG_VT_DWORD),0},+
{DLLName,$(NoTitle),$(!REG_VT_SZ),"CQRNICMN.DLL"}}
Shell  $(UtilityInf), AddValueList, $(HotPlugKey), $(NewValueList)
CloseRegKey $(HotPlugKey)
endif
endif
set HotPlugKeyName = "SOFTWARE\Compaq\Cpqrcmc\ClassDLLs\NicMiniport\e100b"
OpenRegKey $(!REG_H_LOCAL) "" $(HotPlugKeyName) $(MAXIMUM_ALLOWED) HotPlugKey
ifstr $(HotPlugKey) == $(KeyNull)
CreateRegKey $(!REG_H_LOCAL) {$(HotPlugKeyName),0,GenericClass} "" +
$(MAXIMUM_ALLOWED) "" HotPlugKey
ifstr $(HotPlugKey) != $(KeyNull)
set NewValueList = {{BaseOIDAddress,$(NoTitle),$(!REG_VT_DWORD),4278322176},+
{SetOIDAddress,$(NoTitle),$(!REG_VT_DWORD),4278321933}}
Shell  $(UtilityInf), AddValueList, $(HotPlugKey), $(NewValueList)
CloseRegKey $(HotPlugKey)
endif
endif
return $(ReturnValue)
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: ftp, load: 1.57