1. dx200w.zip Driver
2. NW411.TXT File Contents

NW411.TXT Driver File Contents (dx200w.zip)

******************************************************************************
*                                                                            *
*Installation guide for DX200V /DX200W PCI in Novell Netware Server 4.11/5.0 *          								    
*                                                                            *
******************************************************************************

   Location of Driver:     \NETWARE\SERVER.41X\RTSSRV.LAN

   Installaton Procedure :
   ---------------------
      Before you start with the installation  process,  make sure that
      the Novell NetWare v4.11/5.0 server is properly installed.
      Similarly, your adapter should also be properly installed in your
      server.
      1. Insert the Driver Diskette into drive A and check the contents of
	 subdirectory  A:\NETWARE\SERVER.41X , It should contain the 	                           
         following file :

         RTSSRV.LAN  Novell NetWare V4.11/5.0 Server Driver
         RTSSRV.LDI  Novell NetWare V4.11/5.0 Server Driver Installation                      
                     Information File

      2. At the Netware prompt load the Ethertsm.nlm from the driver 		                           
         diskette.

         server name : LOAD A:\NETWARE\SERVER.41X\ETHERTSM.NLM

      3. At the  NetWare prompt (indicated by the Server name), run the
         INSTALL.NLM program by typing:

         server name: LOAD INSTALL <Enter>

      4. Select  Driver options --> Configure network drivers.
      
      6. Press the <Ins> key to specify other drivers to install.

      7. Press  <F3>  and specify the driver path (A:\NETWARE\SERVER.41X) 
         and press <Enter>.

      8. The RTSSRV.LAN driver should appear in your choice list for the
         'Select a  LAN  Driver' field. Choose this  driver to start the
         driver loading and  binding  procedure.  This will allow you to
         load and bind all 4 frame types supported by NetWare.

      9. Add the LOAD and BIND statements you require to the server's
         AUTOEXEC.NCF file so that the LAN driver will load automatically
         each time the server starts up.


      Installation Notes:
      -------------------
      1.Installing Multiple LAN Adapters:
         The keyword  "SLOT"  is  provided for multiple LAN adapters in a
         single server by the driver RTSSRV.LAN.  So, add EtherID in LOAD
         commands. For example:

         LOAD RTSSRV FRAME=Ethernet_802.2 NAME=LAN_A SLOT=1
         BIND IPX TO LAN_A NET=11
         LOAD RTSSRV FRAME=Ethernet_802.2 NAME=LAN_B SLOT=2
         BIND IPX TO LAN_B NET=22

      2. The keyword  "MEDIUMTYPE" is provided for specifying adapter's speed
         ( AUTO, 100FULL, 100HALF, 10FULL, 10HALF ) , add MEDIUMTYPE  in LOAD
         commands. For example:

         LOAD RTSSRV FRAME=Ethernet_802.2 NAME=LAN_A SLOT=1  MEDIUMTYEPE=100FULL
         BIND IPX TO LAN_A NET=11