NW312.TXT Driver File Contents (dx200w.zip)

*****************************************************************************
*                                                                           *
* Installation guide for DX200W / DX200V PCI IN Novell NetWare Server 3.12  *       									    
*                                                                           *
*****************************************************************************


   Location of Driver:     \NETWARE\SERVER.312\RTSSRV.LAN

   Installaton Procedure :
   ---------------------
      Before you start with the installation  process,  make sure that
      the Novell NetWare v3.12 server is properly installed.
      Similarly, your adapter should also be properly installed in your
      server.

      1. Insert the Driver Diskette into drive A and check the contents
         of subdirectory  A:\NETWARE\SERVER.312 , It should contain the 
         following file:

         RTSSRV.LAN  Novell NetWare V3.12 Server Driver

      2. At the  NetWare prompt (indicated by the Server name), type

           server name: LOAD A:\NETWARE\SERVER.312\ETHERTSM <Enter>  

      3. To install the server driver, type 

	   server name: LOAD A:\NETWARE\SERVER.312\RTSSRV   <Enter>  

      4. Add the LOAD and BIND statements you require to the server's
         AUTOEXEC.NCF file so that the LAN driver will load automatically
         each time the server starts up.


      Installation Notes:
      -------------------
      1.Installing Multiple LAN Adapters:
         The keyword  "SLOT"  is  provided for multiple LAN adapters in a
         single server by the driver RTSSRV.LAN.  So, add EtherID in LOAD
         commands. For example:

         LOAD RTSSRV FRAME=Ethernet_802.2 NAME=LAN_A SLOT=1
         BIND IPX TO LAN_A NET=11
         LOAD RTSSRV FRAME=Ethernet_802.2 NAME=LAN_B SLOT=2
         BIND IPX TO LAN_B NET=22

      2. The keyword  "MEDIUMTYPE" is provided for specifying adapter's speed
         ( AUTO, 100FULL, 100HALF, 10FULL, 10HALF ) ,  add MEDIUMTYPE in LOAD
         commands. For example:

   LOAD RTSSRV FRAME=Ethernet_802.2 NAME=LAN_A SLOT=1   MEDIUMTYPE=100FULL
         BIND IPX TO LAN_A NET=11

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web5, load: 1.34