Following technical tips are the procedures we experiemented and document it to smooth your scanner application installation while using the SCardSI( PCMCIA/SCSI ) and SparCSI( Parallel/SCSI ) adapters from Shining: [DOS/Windows3.1x] 1. Install the SCardSI or SparCSI as it described on each installation procedures. 2. While system is booting up, the drivers attempt inquiring every devices on the SCSI chain. If sucessful, each device names will be displayed on the screen. If not, check the scanner termination and make sure is on. SparCSI requires device to send in the TERMPWR to activate the converter. If SparCSI LED is not lighted, use the keyboard power adapter or wall mount power adapter for SparCSI. SCardSI use the power from PCMCIA socket. Both of the SCardSI and SparCSI are self-terminated and do not send out the TERMPWR to the SCSI chain. If the last device on the SCSI chain is scanner, make sure the scanner did terminate internally. 3. Install the scanner TWAIN DataSource provided by scanner manufacturers. Do not select the "manufacturer interface card". Choose either ASPI compatible device or Adaptec ASPI driver options. Both SparCSI and SCardSI are ASPI fully compatible. 4. Install the scanning application software such as OminiPage and etc.. to complete the installation procedure. Now, your scanner is ready to use. Note: You might want to re-install the latest TWAIN DataSource drivers from your manufacturers'. [Window95] 1. Install the SCardSI or SparCSI as it described on each installation procedures. 2. While system is booting up, the Windows95 attempt inquiring every devices on the SCSI chain. An "Unknown device" message will be posted for scanner. Choose "Do not install driver" for every messages show up to complete the installation process. If no such message shows up, check the scanner termination and make sure is on. SparCSI requires device to send in the TERMPWR to activate the converter. If TERMPWR is not sent out, use the keyboard power adapter or wall mount power adapter for SparCSI. SCardSI use the power from PCMCIA socket. Both of the SCardSI and SparCSI are self-terminated and do not send out the TERMPWR to the SCSI chain. If the last device on the SCSI chain is scanner, make sure the scanner did terminate internally. 3. Install the scanner TWAIN DataSource provided by scanner manufacturers by "Start", "Run", and the "a:\install.exe". Do not select the "manufacturer interface card". Choose either ASPI compatible device or Adaptec ASPI driver options for Win95 platform. Shinig providess 32-bit MPD drivers for SCardSI and SparCSI which are fully ASPI32 compatible. 4. Install the scanning application software such as OminiPage and etc.. to complete the installation procedure. Now, your scanner is ready to use. Note: It's better to re-install the latest TWAIN DataSource driver from scanner's manufacturer. Check scanner manufacturers' WEB page or BBS to acquire the latest TWIAN DataSource for Windows3.x and Windows95. Twain DataSource drivers supported on the Windows3.x is not usable on Windows95 plaftorm.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.