1. Scardsi.zip Driver
2. SCANNER.TXT File Contents

SCANNER.TXT Driver File Contents (Scardsi.zip)

Following technical tips are the procedures we experiemented and document
it to smooth your scanner application installation while using the 
SCardSI( PCMCIA/SCSI ) and SparCSI( Parallel/SCSI ) adapters from Shining:

[DOS/Windows3.1x]
1.  Install the SCardSI or SparCSI as it described on each installation
	procedures.
2.  While system is booting up, the drivers attempt inquiring every devices
	on the SCSI chain.  If sucessful, each device names will be displayed 
	on the screen.  If not, check the scanner termination and make sure is 
	on.  SparCSI requires device to send in the TERMPWR to activate the 
	converter.  If SparCSI LED is not lighted, use the keyboard power adapter
	or wall mount power adapter for SparCSI. SCardSI use the power from 
	PCMCIA socket. Both of the SCardSI and SparCSI are self-terminated 
	and do not send out the TERMPWR to the SCSI chain.  If the last device
	on the SCSI chain is scanner, make sure the scanner did terminate 
	internally.
3.  Install the scanner TWAIN DataSource provided by scanner manufacturers.	
    Do not select the "manufacturer interface card". 
	Choose either ASPI compatible device or Adaptec ASPI driver options.  Both
	SparCSI and SCardSI are ASPI fully compatible.  
4.  Install the scanning application software such as OminiPage and etc.. to
	complete the installation procedure.  Now, your scanner is ready to use.

Note:  You might want to re-install the latest TWAIN DataSource drivers from
	   your manufacturers'.

[Window95]
1.  Install the SCardSI or SparCSI as it described on each installation
	procedures.
2.  While system is booting up, the Windows95 attempt inquiring every devices
	on the SCSI chain.  An "Unknown device" message will be posted for
	scanner.  Choose "Do not install driver" for every messages show up
	to complete the installation process.
	If no such message shows up, check the scanner termination and make sure is 
	on.  SparCSI requires device to send in the TERMPWR to activate the 
	converter.  If TERMPWR is not sent out, use the keyboard power adapter
	or wall mount power adapter for SparCSI.  SCardSI use the power from 
	PCMCIA socket. Both of the SCardSI and SparCSI are self-terminated 
	and do not send out the TERMPWR to the SCSI chain.  If the last device
	on the SCSI chain is scanner, make sure the scanner did terminate 
	internally.
3.  Install the scanner TWAIN DataSource provided by scanner manufacturers
	by "Start", "Run", and the "a:\install.exe". 
    Do not select the "manufacturer interface card". 
	Choose either ASPI compatible device or Adaptec ASPI driver options for 
	Win95 platform.  Shinig providess 32-bit MPD drivers for SCardSI and
	SparCSI which are fully ASPI32 compatible.
4.  Install the scanning application software such as OminiPage and etc.. to
	complete the installation procedure.  Now, your scanner is ready to use.

Note:  It's better to re-install the latest TWAIN DataSource driver from
	   scanner's manufacturer.
       Check scanner manufacturers' WEB page or BBS to acquire the latest
	   TWIAN DataSource for Windows3.x and Windows95.  Twain DataSource
	   drivers supported on the Windows3.x is not usable on Windows95
	   plaftorm.