The README.TXT file contains:
I. Current release version for drivers and utilities.
II. Device drivers and utilities usage of PCMCIA/SCardSI Converters.
III. Product support list( Not all inclusive )
IV. Diagnostic utility
V. Technical tips
Please use this file as supplement to your installation/user guide.
I. Current released device drivers and utilities version.
******************************************************
PSEPP --
File name Size Date Time Version
===========================================================
STASPDSK SYS 10,499 08-17-96 1:25p v1.30
PCM80ASP SYS 7059 03-27-97 3:35p v1.30
STASPICD SYS 16097 09-13-95 10:28a
WBSDISK EXE 41257 12-19-93 5:08p
WBSDISK EXE 37,183 08-17-96 6:05p v3.00
STASPTAP EXE 31545 08-09-95 9:25a
WINASPI DLL 18,407 08-12-96 3:30p v1.00
PCMS8095 MPD 12,800 06-25-96 6:43p
PCMS8095 INF 2,263 01-29-97 6:01p v2.00
README W95 1,061 06-24-96 6:45p
README EXE 38261 03-23-94 3:53p
TAPE TXT 1275 07-07-95 8:02a
PCMS80CL SYS 2646 07-31-95 5:55p
README TXT
II. Device Driver and Utility Usage of the PCMCIA/SCcardSI card.
=======================================================
PCMCIA Card/Socket Services Client Driver (PMS80CL.SYS)
=======================================================
This device driver is required to allow interaction between the
PCMCIA Card/Socket Services and the SCardSI card. Make sure
that you had already install the PCMCIA Card/Socket services
onto your computer.
Installation Format:
Device = \path\PMS80CL.SYS [/Xn]
/Xn: ignore checking card service version
1 - yes, 0 - no( default )
=========================
ASPI Driver (pcm80asp.SYS)
=========================
Installation Format:
Device = \path\pcm80asp.SYS [/Dn] [/Wn] [/Sn] [/Nn] [/An] [/Zn]
[/In]
/Dn - define how many SCSI drives are attached.
n must be 1 - 7, if n is 1 only SCSI ID 0 drive
is checked, if n is 2 only SCSI ID 0, 1 drives
are checked.
Default value is 7.
/Wn - define how many seconds to wait time for drive to
be stable during POWER ON time.
n must be 0 - 1800.
Default value is 5.
/Sn - set the starting search port access speed level for
printer port.
n must be 0 - 9.
Default value is 0 (the fastest level).
Note: In order to streaming the tape backup process,
please refer to TAPE.TXT file to learn how to
use the /Sn parameter to achieve that.
/Nn - define the new name of the ASPI Manager
Default: "SCSIMGR$"
/An - disable / enable auto request sense function
n: 0, disable
1, enable (default)
/Zn - n is a byte-length value
bit0 = 1, use the slower handshaking speed with low speed
device
0, use the block handshaking speed with device
(default)
Once the value is set, it applys to all of the
device on the chain.
Automatical setting algorithm is inserted after
pcm80asp.sys v1.30. Do not set it unless it's
necessary.
/In - define the adapter card SCSI ID
n must be 0 - 7, default value is 7.
========================
Disk Driver (STASPDSK.SYS)
========================
This device driver requires the ASPI device driver. Install the
pcm80asp.SYS driver before the disk driver.
This driver supports Fixed Hard Disk, Removable Hard Disk,
Magneto-Optical Disk and etc..
Installation Format:
Device = \path\STASPDSK.SYS
The driver's features include the following:
- drives SCSI hard disks, magneto-optical drives, and
removable cartridge disks.
- supports on-line disk change for removable drives.
- compatible with MS-DOS versions 5.0 and above
- drives up to 7 disk drives simultaneously.
==========================
Disk Utility (WBSDISK.EXE)
==========================
Command Syntax:
WBSDISK
The utility's features include the following:
- disk preformat
- disk partition
============================
CD-ROM Driver (STASPICD.SYS)
============================
This device driver requires the ASPI device driver. Install the
pcm80asp.SYS driver before the disk driver.
Installation Format:
Device = \path\STASPICD.SYS /D:drivename
The "drivename" stands for the physical CD-ROM drive name
which should be identical to the "drivename" specified
in the following MSCDEX.EXE line. It can be any ASCII string.
Please install MSCDEX.EXE in AUTOEXEC.BAT file as shown below:
MSCDEX /D:drivename
======================================
WINASPI.DLL Windows compliant ASPI DLL
======================================
Some of the scanner, tape backup applications require the Windows
compliant DLL to be loaded. This DLL indirectly interfaces with
pcm80asp.SYS to hardware. Copy this file to the Windows home
directory.
III. Product Support List - Not all inclusive
********************
Most SCSI storage devices are supported even
they may not be listed above. New models are constantly added to
to the list. Please consult the dealers for updated information.
SCSI Devices:
.Disk:
Manufacturer Type Model No. Capacity
---------------------------------------------------------------
ALPS fixed disk DRD 100S 100 MB
CONNER fixed disk CP30100 121 MB
FUJITSU fixed disk 2611S 40 MB
IBM fixed disk WDC80 80 MB
MATSUSHITA optical disk LF-3090 128 MB
MAXTOR fixed disk XT-8760S 638 MB
MAXTOR fixed disk LXT-213S 203 MB
QUANTUM fixed disk LPS105S 105 MB
QUANTUM fixed disk 52S/LP 52 MB
QUANTUM fixed disk 525S 500 MB
QUANTUM fixed disk Empire 540, 1080, 1400
2100
RICOH optical disk RO-5030E 280 MB
SONY optical disk SMO-C301,F331 128 MB
SONY optical disk SMO-C501-00 280 MB
SEAGATE fixed disk ST1400 140 MB
SYQUEST removable disk SQ5110 88 MB
.Tape:
Manufacturer Model No. Capacity
-----------------------------------------------
ARCHIVE 2150S 150 MB
CONNER 4 GB
SHINWA SDX-85 150 MB
TEAC MT-2ST/F 600 MB
TEAC MT-2ST/N 160 MB
TEAC MT-01N 155 MB
TEAC MT-01F 555 MB
TANDBERG TDC 3800 155 MB
WangDAT
WANGTEK 5525ES 525 MB
WANGTEK 5150ES 150 MB
YE-Data
.CD-ROM
Manufacturer Model No.
--------------------------------------
Apple CD300,CD-SC,CD-SCPlus,Power CD
Power CD II
CD Technologies Porta-Drive(Toshiba 3201/3301/3401)
CHINON CDS-431, CDS-435, CDS-535(PhotoCD)
Hitachi 1750, 3750
Laser Magnetic: CM212, CM214, CM231
MATSUSHITA-KOTOBUKI CR-501-B
MediaVision Reno(PhotoCD)
NEC CDR-25, 35, 55
NEC CDR-72, 77, 80
NEC CDR-82,84,400,500,600, 3XP, 3XE, 4Xe
(PhotoCD)
Philips F80
Pioneer DRM-600 Smart & Friendly 522
Plextor 5028, 5024
SANYO CDR-93RSA
SONY CDU-541,CDU-561,CDU-6110,CDU-6111
CDU-6211,CDU-7211 (PhotoCD)
Texel DM-3010, 3020, 5010, 5020, 7120
Toshiba 3301, 3401,4101,5100(PhotoCD)
.DAT:
Manufacturer Model No. Media
------------------------------------------------------------------
Archive Phyton
RByte, ExaByte 4200, 8200, 8500 4mm, 8mm
Hewlett Packard 35470, 35480
WANGTEK 6130HS SONY DDS data Cartridge (DG-90M)
.Scanner:
Manufacturer Model No.
-----------------------------------------------
HP ScanJet IV
Mustek TwainScan Duo600
.Operating System:
MS-DOS 3.3 MS-DOS 5.00 MS-DOS 4.01
DR-DOS 5.00 MS-DOS 6.20 DR-DOS 6.00
MS-WINDOWS 3.0 MS-WINDOWS 3.1 OS/2 2.0, 2.1
IV. Technical tips
**************
Use this section as supplement to the Trouble Shooting section in the
manual.
a. ASPI compatible applications tested:
CorelSCSI, CorelSCSI Version 2, SCSI Toolbox, Syplus Tape Backup
Novastor Tape Backup, Gazelle Tape Backup, Conner Backup
Exec and Adaptec's EZ-SCSI 3.0.
b. All of the CD-ROM, Hard Disk, Floptical and Floppy device drivers
are based upon the ASPI (pcm80asp.SYS ) device driver. Make sure
you have them loaded in order correctly.
c. If you are using the PCMCIA/SCcardSI card as a diagnostic tool
for your SCSI system. Use the /I switch to set the adapter card
ID to any value other than the value of embedded SCSI host adapter.
d. HP IIcx Scanjet: After installing both the PCMCIA/SCardSI card
software and the HP software, remove the "MINI400..."
line from your CONFIG.SYS. Next, verify that the lines below
are included, and are in the order shown. Be sure to substitute the
correct path for the word path below.
DEVICE=path\pcm80asp.SYS /D7 S0 W3 Z1
DEVICE=path\SJIIX.SYS
e. To achieve the TAPE drive streaming performance with the ASPI
driver and third party tape backup software, please refer to the
TAPE.TXT file for more detail information.
f. For HP-C4324 CD-Writer user, it's required to add /Z1 at the end
of the WBSASPI.SYS command line in the CONFIG.SYS and /A0 to disable
auto-request sense feature.
g. If your hard disk drive size is larger than 1GB, please use the
v1.30 STASPDSK.SYS and v1.0 WBSDISK.EXE to correctly set the
partition size.
h. For CD-R application, use the v1.0 WinASPI.DLL to correctly
read in the disc/track information.
PCMCIA/SCardSI README.TXT ( 03/97 )
Note: All of the products mentioned above are registered trademark
of their own.
Technical supports:
SHINING Technology, Inc.
10533 Progress Way, #C
Cypress, CA 90630
Tel: (714) 761-9598
Fax: (714) 761-9624
BBS: (714) 761-5814
WWW: http://www.shining.com
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.