NDIS Driver Installation Guide for IBM LAN Server
=======================================================
Introduction
============
This document describes the procedure to install NDIS2 driver on IBM
OS/2 LAN Server.
This driver conforms to the Network Driver Interface Specification
(NDIS 2.01) defined by Microsoft/3Com.
Installation Procedure
======================
A. Installing driver procedures for IBM LAN Server 2.0 or 3.0 :
Before you start with the installation process, make sure that
OS/2 LAN Server is properly installed. Similarly, your adapter
should also be properly installed in your server.
1. Copy DC21X4.OS2 and DC21X4.NIF files from your Driver diskette
(\LANSRVR\OS2) to C:\IBMCOM\MACS.
2. Click the OS/2 LAN Service LAPS icon or manually run LAPS.EXE
from the IBMCOM directory.
3. Select "Installation and configuration". The IBM logo should
appear on screen.
4. Click <OK>.
5. Select <Advance> and press <Enter>.
6. Select "Install or Configuration this Workstation."
7. Select server type, adding a server or domain controller. The
"install or remove" selections should appear.
8. Select "Configure a component."
10. Click the "Configure" button.
11. Select "Configure workstation."
12. Select "Digital DC21X4 10/100Mbps Ethernet Adapter" when prompted to
identify you Network Adapter. Then click the <Add> button.
13. Select IBM NETBIOS from the list and click the <Add> button.
14. Select <OK> to confirm all selections.
15. Follow screen instructions to complete the process, selecting
<OK> to accept default selections.
16. Installation is complete now. Reset your PC by turning it off
and on.
B. Installing driver procedures for IBM OS/2 LAN Server 4.0 :
Before you start with the installation process, make sure that
OS/2 LAN Server is properly installed. Similarly, your adapter
should also be properly installed in your server.
1. In OS/2 window, Click on the "MPTS" icon.
2. The screen will display the IBM Log, press "OK".
3. Select "Install" button.
4. Insert the driver disk, specify the driver path A:\LANSRVR\OS2
and press <Enter>.
5. When complete above step to load DC21X4.OS2 into OS/2 system,
then configure your system.
6. The same step as step 3, select "Configure" button.
7. The screen will display "Configure" dialog box and select "LAN
adapters and protocols" then press "configure" button.
8. The screen will display "LAPS Configuration" dialog box, move
highlight to "Digital DC21X4 10/100Mbps Ethernet Adapter" item in
"Network Adapter" window, and select "NetBios" protocol. Then,
press "OK".
9. Installation is complete now. Reset your PC by turning it off
and on.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.