1. tl-6200i.exe Driver
2. README.TXT File Contents

README.TXT Driver File Contents (tl-6200i.exe)

            Microsoft Windows NTAS 3.5 , 3.51, 4.0 RPL server install
          ************************************************************

 1.Installing the Remoteboot Service on the Server.
  (a).Choose Control Panel , Network , Add Software , Remoteboot Service
      , put NTAS CD or disk they will be installed Remoteboot Service.

   Note:
        To install RPL server before , you must be had installed DLC and
   NetBEUI protocol in your NTAS.

 2.Sharing RPLFILES files and to install MS-DOS Files for Remoteboot
   workstation.

  (a).Sharing \\systemroot\rpl\rpl\rplfiles to V:\\RPLFILES
                                                ;use File manager sharing

  (b).Copy all the MS-DOS 6.22 ver files to
                              ----> \\systemroot\RPL\RPLFILES\BINFILES\DOS622

       copy c:\dos\*.* V:\BINFILES\DOS622
       attrib -s -h c:\io.sys
       attrib -s -h c:\msdos.sys
       copy c:\io.sys V:\BINFILES\DOS622
       copy c:\msdos.sys V:\BINFILES\DOS622
       attrib +s +h c:\io.sys
       attrib +s +h c:\msdos.sys

 3.Creating Remoteboot configuration for new adapter
  (a).copy the MS-DOS device driver (NDIS2) for the DC21X4 adapter to the
    \\systemroot\RPL\BBLOCK\NDIS directory  (DC21X4.DOS)
  (b).Create this directory \\systemroot\RPL\BBLOCK\NETBEUI\DC21X4 and
      copy DC21X4.CNF , protocol.ini files
  (c).use RPLCMD utility to add a bblock record for new adapter.
  (d).In MS-DOS Prompt type <1>. NET START RemoteBoot
                            <2>. RPLCMD
  (e).Screen will display under line option and you following these do it.

        Adapter Boot Config Profile Service Vendor Wksta [Quite] V
        Add Del Enum: A
        VendorName=00C026  ;your adapter's ethernet ID
        VendorComment=DC21x4 Ethernet Adapter ;optional

        Adapter Boot Config Profile Service Vendor Wksta [Quite] B
        Add Del Enum:A
        BootName=DOSY
        VendorName=00C026
        BbcFile=BBLOCK\NETBEUI\DC21X4\DC21X4.CNF
        BootCommet=Name of this adapter  ;optional string
        WindowsSize=0

        Adapter Boot Config Profile Service Vendor Wksta [Quite] C
        Add Del Enum:A
        ConfigName=DOS622X
        BootName=DOSY
        DirName=DOS
        DirName2=DOS622
        FitShared=FITS\DOS622.FIT
        FitPersonal=FITS\DOS622P.FIT
        ConfigComment=DOS 6.22 <Adapter name>
        DirName3=
        DirName4=

  (f).Shutdown Windows NTAS server, and reboot it.
 4.Login Administrator to NTAS server.

 5.Starting Remoteboot service and Remoteboot manager
  (a).In MS-DOS Prompt type " NET START Remoteboot "
  (b).In Network administrator , Remoteboot Manager
      1.Choose Remoteboot , New Profile , created a DC21X4 Profile Name
      2.Add new workstation for DC21x4 adapter and choose DC21x4 Profile
        file.

 6.To config DC21X4 card "Node ID (00C026******)" and Running Boot ROM of
   DC21X4 Card.

  Note:
      If the new workstation Node ID is not match for your workstation ,
      you can use "Convert Adapters" in Remoteboot option.