1. tl-6200i.exe Driver
2. README.TXT File Contents

README.TXT Driver File Contents (tl-6200i.exe)

               LAN Manager 2.1 Remoteboot server install
             ***************************************************

  1.Installing Microsoft OS/2 in the HD.

  2.Installing Microsoft LAN Manager 2.1 in OS/2.

  Note:
      Network Driver protocol must have Netbeui , Remoteboot protocol .

  3.Installing RPL server in LAN Manager 2.1

   (a).IN OS2 Full screen mode type RPLSETP  and choose MS-DOS workstation.

      Copy files from A:\
      Install LAN MANAGER for MS-DOS Remoteboot workstation? Y
      Install LAN MANAGER for MS OS/2 Remoteboot workstation? N
      Replicate Remoteboot files ? N

      Is the above information correct (Yes , No ,eXit ) ? Y

  4.Installing MS-DOS Files for Remoteboot workstation.
   (a).Copy all the MS-DOS files to the
                            ------> \\systemroot\RPL\RPLFILES\BINFILES\DOS500
       attrib -s -h c:\io.sys
       attrib -s -h c:\msdos.sys
       copy c:\io.sys \\systemroot\RPL\RPLFILES\BINFILES\DOS500
       copy c:\msdos.sys \\systemroot\RPL\RPLFILES\BINFILES\DOS500
       attrib +s +h c:\io.sys
       attrib +s +h c:\msdos.sys

  5.Creating remoteboot configuration for new adapter
   (a).copy the MS-DOS device driver for the network adapter to the
   \\systemroot\RPL\BBLOCK\NDIS directory (DC21X4.DOS of NDIS2 driver)
   (b).Create the directory \\systemroot\RPL\BBLOCK\NETBEUI\RTL8139 and
       copy DC21X4.CNF , protocol.ini files
   (c).add these contents to RPL.MAP file :

        ;boot bblock records:
        yyyyyyyyyyyy BBLOCK\NETBEUI\DC21X4.CNF 2 6 F ~ DOS ~DC21X4
        00C026~ ,,,, ~ RDOSY

        ;default workstation records:[enable only one in each address range]
        00C026???? ?????? D FITS\DEFAULT [RPL_SERVER_NAME] S ~~~ ,,, ~RDOSY~
        DEFAULT *~DC21X4 ~* ~~~

        ;profile and workstation records added by rplmgr:

    (d).In OS/2 Full Screen type "NET" and logon supervisor to Network
        1.In OS/2 Full Screen type "RPLINST" !!! wait for minutes ....
        2.Choose View , Available resource , RTLFILES , Use resource ,
          Local device [ D:]

  6.Starting Remoteboot service and Remoteboot manager
   (a).In MS-DOS Prompt type " NET START Remoteboot "
   (b).In OS/2 Full Screen type " RPLMGR " (RPL MANAGER utility)
      1 Choose Remoteboot , New Profile , created a DC21X4 Profile Name
      2 Add new workstation for DC21X4 adapter and choose DC21X4 Profile
        file.

  7.To config DC21X4 card "Node ID (00C026*******)" and Running Boot ROM of
    DC21X4 Card .

  Note:
      If the new workstation Node ID is not match for your workstation ,
      you can use "Convert Adapters" in Remoteboot option.