Driver Installation Guide for MS LAN Manager v2.x (OS2)
*********************************************************
Introduction
This document describes the procedure to setup NDIS 2.01 driver on
LAN Manager 2.x OS/2 station.
This driver conforms to the Network Driver Interface Specification
(NDIS 2.01) defined by Microsoft/3Com.
Installation Procedure
A. Suppose you install MS LAN Manager on a OS2 workstation for the
first time.
1. Execute the "SETUP.EXE" program that is provided by LAN Manager.
Upon completion of retrieval of the last workstation disk's
contents, you will be asked if you want to import additional
network drivers. Answer "YES".
2. Insert this diskette into the floppy drive.
3. Follow the instructions on the screen. "SETUP.EXE" program will
retrieve NDIS driver programs from the diskette and put them on
the directory where LAN Manager resides.
4. Reboot your computer and follow NDIS binding procedure to use
the DC21X4.OS2 NDIS driver programs.
B. If you have installed LAN Manager in your harddisk.
1. Execute the "SETUP.EXE" program.
2. Insert this Driver diskette into the floppy drive.
3. On the screen, select 'Configuration', 'Network Drivers', 'other
Drivers' function and input correct diskette driver name.
4. Follow the instructions on the screen. "SETUP.EXE" program will
retrieve NDIS driver programs from the NDIS driver disk and put
them on the harddisk and directory where LAN Manager resides.
5. Reboot your computer and follow NDIS binding procedure to use
the DC21X4.OS2 NDIS driver programs.
--- Sample PROTOCOL.INI file ---
[PROTOCOL MANAGER]
DRIVERNAME = PROTMAN$
[NETBEUI_XIF]
Drivername = netbeui$
SESSIONS = 40
NCBS = 85
BINDINGS = "DC21X4_NIF"
[DC21X4_NIF]
DRIVERNAME = DC21X4$
SIA_Mode = AUTOSENSE
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.