10/100M Fast Ethernet PCMCIA Adapter Installation
for Windows for Workgroup 3.11
Introduction
ÍÍÍÍÍÍÍÍÍÍÍÍ
This installation assumes that the PCMCIA drivers are working
properly. Getting Started will describe the installation
instructions.
Getting Started
ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ
Note: The WFW 3.11 driver complies to NDIS 2.0 specs.
At DOS prompt, type WIN to enter the windows system.
Click the "Network" icon from the "Main" Group.
Windows for Workgroup will present a list of all available
drivers. Select UNLIST for third-party adapters not included
in the list.
Windows for Workgroup will ask for the path where the adapter
drivers reside.
Insert the driver diskette in Drive A, and then type the
following
A:\NDIS2
Windows for Workgroup will check whether or not the OEMSETUP.INF
file exists in the specified path. If the file exists, Windows
for Workgroup will then copy the appropriate drivers into the
Windows for Workgroup system.
The driver is now properly copied. Installation will then
proceed to the next steps. For information on these steps,
please refer to your Windows for Workgroup manual.
Reboot the Windows for Workgroup System.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.