10/100M Fast Ethernet PCMCIA Adapter Installation for Microsoft Network Client 3.0 for MS-DOS Introduction ÍÍÍÍÍÍÍÍÍÍÍÍ This installation assumes that the PC Card devices are working properly. Please consult INST_DOS.TXT for help with PC Card driver. Getting Started will describe the installation instructions. Getting Started ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ [Method 1]: Please change to the Microsoft Network Client subdirectory and run SETUP.EXE. (default directory is C:\NET) Respond to the screen prompts, selecting "Change Network Configuration", then press <Enter>. Move the highlight to "Add driver for network Adapter", press <Enter>. Select "Network adapter not shown on list below ...". Insert the driver diskette into the drive A or B. Please specify the location of the OEM driver Ex: A:\NDIS2 Select "Add Protocol" as you want. Follow screen instructions to complete the process. Simply pressing <Enter> for each screen display will select the default options. Press <Enter> until you reach the display prompting you to reboot your system. [Method 2]: Execute SETUP.EXE from Microsoft Network Client for DOS release diskette. Specify the <target path> to which Microsoft Network Client for DOS files will been copied. Select "Network adapter not shown on list below ...". Insert the driver diskette into the drive A or B. Please specify the location of the driver Ex: A:\NDIS2 Select "10/100M Fast Ethernet PCMCIA Adapter". Select "Change Network Configuration", "Add Protocol" as you want. Follow screen instructions to complete the process. Simply pressing <Enter> for each screen display will select the default options. Press <Enter> until you reach the display prompting you to reboot your system. Sample Configuration Files: --------------------------- PROTOCOL.INI [network.setup] version=0x3110 netcard=FP16,1,FP16,1 transport=ms$ndishlp,MS$NDISHLP transport=ms$netbeui,MS$NETBEUI lana0=FP16,1,ms$netbeui lana1=FP16,1,ms$ndishlp [protman] DriverName=PROTMAN$ PRIORITY=MS$NDISHLP [MS$NDISHLP] DriverName=ndishlp$ BINDINGS=FP16 [MS$NETBEUI] DriverName=netbeui$ SESSIONS=10 NCBS=12 BINDINGS=FP16 LANABASE=1 [FP16] DriverName=FP16ND$ IOADDRESS=300 INTERRUPT=3Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.