10/100Mbps PCI Fast Ethernet Adapter LAN Driver NetWare 32-bit ODI Driver for DOS & Windows Installation Guide ============================================================== A.) Installation Procedure for DOS32 ==================================== 1. If you have completed installed the NetWare Client 32 for DOS, all you have to do is to modify STARTNET.BAT. Please see the sample STARTNET.BAT below the installation instructions. 2. Run INSTALL.EXE from NetWare DOS 32 diskette 1 (or from NetWare 4.11 CD). When the product manual appears, mark the "NetWare Client 32 for DOS" item, then press <Enter>. 3. Select the "32-Bit LAN Drivers" item from "Select a LAN Driver Type" menu, an then press <Enter>. 4. Select the "USER SPECIFIED 32 BIT DRIVER" item from "32-bit Network Board Drivers" menu, and then press <Enter>. 5. Insert the PCI Fast Ethernet Adapter Driver Diskette into your floppy diskette drive, then specify the driver path. A:\CLIENT32 6. Select "PCI Fast Ethernet Adapter LAN Driver", and then press <Enter>. 7. Set the correct driver parameters to comply with your network environment, then press <F10> to continue. 8. Follow the instructions to complete the Client32 for DOS software installation. 9. Reboot your PC. Sample STARTNET.BAT for DOS32: ------------------------------ SET NWLANGUAGE=ENGLISH C:\NOVELL\CLIENT32\NIOS.EXE LOAD C:\NOVELL\CLIENT32\LSLC32.NLM LOAD C:\NOVELL\CLIENT32\CMSM.NLM LOAD C:\NOVELL\CLIENT32\ETHERTSM.NLM LOAD C:\NOVELL\CLIENT32\DM9PCI.LAN FRAME=ETHERNET_802.2 CLIENT32DOS LOAD C:\NOVELL\CLIENT32\DM9PCI.LAN FRAME=ETHERNET_802.3 CLIENT32DOS LOAD C:\NOVELL\CLIENT32\DM9PCI.LAN FRAME=ETHERNET_II CLIENT32DOS LOAD C:\NOVELL\CLIENT32\DM9PCI.LAN FRAME=ETHERNET_SNAP CLIENT32DOS LOAD C:\NOVELL\CLIENT32\IPX.NLM LOAD C:\NOVELL\CLIENT32\CLIENT32.NLM Notes: a. If you request 10Mbps speed and full duplex mode, please change the statement SPEED/MODE TYPE(if not specify the type, default is NWAY) which inside STARTNET.BAT as LINE_SPEED=10 TP_FULL_DUPLEX. Please change corresponding option for another frame type mode or to refer in \NETWARE\SERVER.4XX sub-directory of README.TXT file. b. If you have any memory problem, please refer to the Memory Management on Section 6 in \NLS\ENGLISH\README.TXT file of the "Client32 Disk 1 for DOS". The diskettes are made from Novell Netware CD. B.) Installation Procedure for Microsoft Windows 3.x ==================================================== 1. Refer to DOS for Client32. 2. Run SETUP.EXE for NetWare Windows32 diskette 1. (or from NetWare 4.11 CD) 3. Select the "User Supplied Driver" item from "ODI Driver Selection" menu, and then press <Next>. 4. Insert the PCI Fast Ethernet Adapter Driver Diskette into floppy diskette drive 'A', then specify the driver path. A:\CLIENT32\DM9PCI.LAN 5. Select "PCI Fast Ethernet Adapter LAN Driver", and then press <OK>. 6. Select the correct driver parameters to comply with your network environment. 7. Follow the instructions to complete the client32 for Windows installation. C.) Installation Procedure Microsoft Windows 95 =============================================== If you have installed the Microsoft Client in your Windows 95 system, you should remove the adapter object and NDIS 2/3 driver from Windows 95 system. 1. Remove adapter objects and drivers. 2. Install the Client 32 driver installation information files. 2.1 Insert disk 1 of the CLIENT32 installation disk, and then run SETUP.EXE. 2.2 Follow Novell's instruction. If you are asked to select a device, choose a NIC that you don't own. This will save you from reinstalling the Novell disks later. 2.3 When the installation program is finished, you will have a choice of rebooting the system, returning to Windows or customize. 2.4 Shutdown and turn off the machine. 3. Client 32 Driver Installation on Windows 95 3.1 Plug the PCI Fast Ethernet Adapter into one of the Master PCI slots of your PC. 3.2 Turn power on, and then boot operating system from Windows 95. 3.3 Windows 95 will prompt "PCI Ethernet Controller" in "New Hardware Found" or "Update Device Driver Wizard" dialog box. 3.4 Follow the instructions to complete the installation. Windows 95 will ask you to issue the proper path of the following diskette: a. NetWare Client 32 for Windows 95 Diskette. b. PCI Fast Ethernet Adapter Driver Diskette --> Insert the PCI Fast Ethernet Adapter Drive Diskette, then assign the path. A:\CLIENT32 c. Windows 95 CD.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.