README.TXT Driver File Contents (bw2kr232.exe)

-------------------------------------------------------------
SiS 6326 Driver Installation Guide Rev. 1.32 (03/12/2001)
-------------------------------------------------------------

SiS 6326 AGP/PCI Graphics & Video Accelerator has five sets of drivers 
for different operation systems as Windows 95/98/Me, Windows 2000, Windows NT,
Windows 3.1, OS/2 and DOS. The location of these drivers were listed up below.

(1). Windows 95 driver and utilities: \WIN95\SETUP.EXE
     Windows 98/Me driver and utilities: \WIN98ME\SETUP.EXE

(2). Windows 2000 drivers: \WIN2000\SISV6326.INF

(3). Windows NT drivers:
     (a). Windows NT 3.5: \WINNT35\OEMSETUP.INF
     (b). Windows NT 4.0: \WINNT40\SISV6326.INF
     (c). Windows 2000  : \WIN2000\SISV6326.INF

(4). OS/2:
     (a). OS/2 v2.1 (single byte code system) 
          drivers and utilities: \OS2\SBCS.21\SISINST.CMD
     (b). OS/2 v3.0 (single byte code system)
          drivers and utilities: \OS2\SBCS.30\SISINST.CMD
     (c). OS/2 v3.0 (double bytes code system)
          drivers and utilities: \OS2\DBCS.30\SETUP.CMD and
                                 \OS2\DBCS.30\SISINST.CMD

(5). Windows 31 drivers and utilities: \WIN31\SETUP.EXE

(6). DOS:
     (a). ADI42 drivers: \DOS\INSTDRV.EXE

For each OS, Users may refer to the respective procedure below to 
proceed the driver installation.


***  Driver Installation Procedure for Windows 95/98/Me  ***
1. Find the file "Setup" under the directory win95/98/Me.
2. Run the program "Setup" by double clicking on it.
3. Follow up indication to proceed the installation procedure.
4. The driver installation will be completed after system restarts.


***  Driver Installation Procedure for Windows 2000  ***
1.  These drivers must be installed by a user with Windows 2000 Administrator
    privileges.  Please consult your system administrator or Microsoft
    Windows 2000 User's Manual for more information on Administrator
    privileges. 
2.  Select "My Computer" icon.
3.  Select "Control Panel" under "My Computer".
4.  Select "System" under "Control Panel".
5.  Select "Device Manager" under "Hardware" page.
6.  Under "Display adapters", select the name of the SiS6326 adapter you have
    installed.  If you do not see a Display adapters option, or if your SiS6326
    adapter is not listed, under Other Devices, select Video Controller (VGA
    Compatible).
7.  Select the "Driver" tab.
8.  Select "Update Driver".
9. Select "Next".
10. Select "Next".
11. Verify that "Specify a location" has a check mark next to it.  If it does
    not, click in the box next to "Specify a location" to place a check mark
    in the box.  Select "Next".
12. Enter the path to the SiS6326 drivers in the "Copy manufacturer's files
    from:" dialog.  Select "OK".
13. If you get a dialog box that states "A suitable driver for this device
    is already installed.", click in the box next to "Install one of the
    other drivers" to place a check mark in the box, then select "Next".
    Otherwise, select "Next", then proceed to step 16.
14. Select SISV6326.INF from the list.
15. Select "Finish".
16. Select "Close".
17. Windows 2000 will ask if you wish to restart the computer.  Select "Yes".


***  Driver Installation Procedure for Windows NT 3.5  ***
1. Select "Main" icon.
2. Select "Control Panel" under "Main".
3. Select "Display" under "Control Panel".
4. Select "Change Display Type" under "Display Settings".
5. Select "Change .." under "Adapter Type".
6. Select "other .." under "Select Device".
7. Give the path where the driver was stored under "Install From Disk" 
   then click "OK". For example: d:\6326\Winnt35
8. Select desired mode such as "SiS 800x600, 256 colors, 85Hz" under 
   "Select Device" then click "Install".
9. Follow up the coming up indication.
10. The driver installation will be completed after system restarts.


***  Driver Installation Procedure for Windows NT 4.0  ***
1. Select "My Computer" icon.
2. Select "Control Panel" under "My Computer".
3. Select "Display" under "Control Panel".
4. Select "Settings" under "Display Properties".
5. Select "Display Type" under "Settings".
6. Select "Change.." under "Adapter Type".
7. Select "Have Disk.." under "Change Display".
8. Select "Browse" under "Install From Disk".
9. Give the path where the driver was stored under "Locate File" then 
   click "Open". For example: d:\6326\Winnt40
10. Back to "Install From Disk" screen then click "OK".
11. The message "SiS 6326" will appear under "Change Display". Click "OK".
12. Confirm "Yes" under "Third-party Drivers". WinNT 4.0 will perform 
    driver installation and ask the user to close windows to restart system.
13. Close "Display Type" window.
14. Close "Display Properties" window.
15. Reboot the system then the driver installation is completed.


***  Driver Installation Procedure for OS/2  ***
1. Select "OS/2 System" icon.
2. Select "Command Prompts" under "OS/2 System".
3. Select "OS/2 Window" under "Command Prompts".
4. Run the file "sisinst.cmd" under the OS/2 prompt.
   For example: d:\6326\os2\Sbcs.30\sisinst.cmd  <Enter>
5. Select desired resolution and frame rate under "Select screen 
   parameters for SiS SVGA" then click "OK".
6. Reboot the system then the driver installation is completed.


***  Driver Installation Procedure for Windows 3.1  ***
1. Find the file "Setup" under the directory win31.
2. Run the program "Setup" by double clicking on it under file manager screen.
3. The "Setup" program will add a window "SiS Multimedia VX.XX" on desktop. 
   Select the icon "SVGA Setup" in this window.
4. Select desired resolution, frame rate, font, colors ¡K then press "OK" 
   under "SiS VGA System Configuration".
5. Restart Windows 3.1 then the driver installation is completed.


***  Driver Installation Procedure for AutoCad R12  ***
1. Find the file "instdrv.exe" under the directory DOS.
2. Run the program "instdrv.exe" and follow up the direction to build up a
   directory named "ADI42" that contains the driver for AutoCad R12.
3. Run the executable file "ADIENV.BAT" under the directory ADI42. It will 
   install the driver of AutoCad R12 automatically.
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: ftp, load: 2.64