VG-8EX System Update v1.01 Tools required * MIDI Sequencer (SMF compatible) * MIDI cable * VG-8EX Ver Up Disk * VG8S-1 ** Important!!** To perform System Version Up, VG8S-1 is necessary as a key. Any VG8S-1 even a used one can be used for this purpose. 1. Connect the MIDI Out of VG-8EX to the MIDI In of the sequencer with a MIDI cable. 2. Insert VG8S-1 (as a key) into the VG-8EX card slot. 3. Power on while holding down SYSTEM and WRITE. 4. The LCD will show "System expand. Are You Sure?" Press F3 and select "MIDI." 5. Load and play the MIDI files from the sequencer in order (VG1.MID, VG2.MID, VG3.MID and then VG4.MID). 6. When all the data is received, the LCD will display "Completed! Please power off and remove card." 7. Power off 8. Power on while holding down PLAY and SYSTEM and confirm the new version number of the VG-8EX. After updating the VG-8EX, you should reinitialize the unit: 1. Power on while holding down F1, F3 and F5 simultaneously. The LCD will display "Memory Initialize". 2. Press F6 "All." The user patches and system parameters are replaced with the factory settings.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.