================================================================== Installation precautions ================================================================== If you have already installed VariOS 303 into the VariOS (hardware), do not copy the [VB.prj] folder (found in the [VariOS Program] folder) to the VariOS drive. Copy only the [VPD-02 for VariOS] file. If you copy the [VB.prj] folder, which holds patch data, it will overwrite the existing folder in the VariOS (hardware), and all the patch data you've created will be lost. For details on installation and use, refer to the VariOS303_E.pdf. ================================================================== Major changes from VariOS 303 main program Version 1.10 to 1.20 ================================================================== - You can now set the MIDI receive channel. ================================================================== Major changes from VariOS 303 controller software Version 1.01 to 1.20 ================================================================== - You can now set the MIDI receive channel - You can now change the appearance of VariOS 303 by choosing [Skin] menu. - You can now use control changes to edit internal parameters. * For the table of correspondences, refer to "MIDI Control Change Table" at the end of the Reference Manual. ================================================================== About "VariOS 303 Reference Manual"(VariOS303_E.pdf) ================================================================== For details on all functions and screens of the VariOS 303, refer to "VariOS 303 Reference Manual"(VariOS303_E.pdf). This manual can also be viewed by using the VariOS 303 Controller "Help" command. This manual also contains information such as a MIDI implementation chart for the VariOS 303. Adobe Corporation's Acrobat Reader is required in order to read the PDF file. * You can download Acrobat Reader from the Adobe website (http://www.adobe.com/). This address may change without notice. Copyright (C)2004 ROLAND CORPORATION All rights reserved. No part of this publication may be reproduced in any form without the written permission of ROLAND CORPORATION.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.