AIC78U2.INF Driver File Contents (fms40asp3a.zip)

;----------------------------------------------------------------
;
; OEMSETUP.INF -- This is a preliminary INF that installs support
;                 for the Adaptec PCI SCSI devices under Win 2000
;
; Copyright (c) 2000 Adaptec Incorporated
;
;----------------------------------------------------------------

;----------------------------------------------------------------
;
; [Version]
;
; Class and ClassGUID are defined in devguid.h
;
;----------------------------------------------------------------
[Version]
signature="$Windows NT$"
Class=SCSIAdapter
ClassGUID={4D36E97B-E325-11CE-BFC1-08002BE10318}
Provider=%INF_PROVIDER%
CatalogFile="aic78u2.cat"
DriverVer=08/08/2000,[3.10]

;----------------------------------------------------------------
;
; [SourceDisksNames]
;
; diskid = description[,[tagfile][,<unused>,subdir]]
;
;----------------------------------------------------------------
[SourceDisksNames]
1 = %FLOPPY_DESCRIPTION%,,,

;----------------------------------------------------------------
;
; [SourceDisksFiles.x86]
;
; filename_on_source = diskid[,[subdir][,size]]
;
;----------------------------------------------------------------
[SourceDisksFiles]
aic78u2.sys= 1,,,,,,,,

;----------------------------------------------------------------
;
; [Manufactuerer]
;
; manufacturer-name 
; %strkey%=models-section-name
; [%strkey%=models-section-name] ...
;
;----------------------------------------------------------------
; Table of Contents
[Manufacturer]
%ADP%= ADAPTEC

;----------------------------------------------------------------
;
; [ControlFlags]
;
;----------------------------------------------------------------
;[ControlFlags]
;ExcludFromFiles.x86=
;CopyFilesOnly=

;----------------------------------------------------------------
;
; Models
;
; device-description=install-section-name,hw-id[,compatible-id...]
;
; "*" indicates that device is supported by more than one
;     enumerator.
;
;----------------------------------------------------------------
[ADAPTEC]
%PCI\VEN_9005&DEV_0010.DeviceDesc% = aic78u2_Inst, PCI\VEN_9005&DEV_0010
%PCI\VEN_9005&DEV_001F.DeviceDesc% = aic78u2_Inst, PCI\VEN_9005&DEV_001F
%PCI\VEN_9005&DEV_0050.DeviceDesc% = aic78u2_Inst, PCI\VEN_9005&DEV_0050
%PCI\VEN_9005&DEV_0051.DeviceDesc% = aic78u2_Inst, PCI\VEN_9005&DEV_0051
%PCI\VEN_9005&DEV_005F.DeviceDesc% = aic78u2_Inst, PCI\VEN_9005&DEV_005F
%PCI\VEN_9005&DEV_0010&SUBSYS_21809005.DeviceDesc% = aic78u2_Inst, PCI\VEN_9005&DEV_0010&SUBSYS_21809005
%PCI\VEN_9005&DEV_0010&SUBSYS_81009005.DeviceDesc% = aic78u2_Inst, PCI\VEN_9005&DEV_0010&SUBSYS_81009005
%PCI\VEN_9005&DEV_0010&SUBSYS_A1809005.DeviceDesc% = aic78u2_Inst, PCI\VEN_9005&DEV_0010&SUBSYS_A1809005
%PCI\VEN_9005&DEV_0010&SUBSYS_E1009005.DeviceDesc% = aic78u2_Inst, PCI\VEN_9005&DEV_0010&SUBSYS_E1009005
%PCI\VEN_9005&DEV_0050&SUBSYS_F5009005.DeviceDesc% = aic78u2_Inst, PCI\VEN_9005&DEV_0050&SUBSYS_F5009005
%PCI\VEN_9005&DEV_0051&SUBSYS_B5009005.DeviceDesc% = aic78u2_Inst, PCI\VEN_9005&DEV_0051&SUBSYS_B5009005



;----------------------------------------------------------------
;
; Install
;
;----------------------------------------------------------------

[aic78u2_Inst.NT]
CopyFiles=@AIC78U2.SYS

;----------------------------------------------------------------
;
; Services
;
; Flag = 0x1 (SPSVCINST_TAGTOFRONT)
;        Make sure that device loads at
;        the front of its group
;
;----------------------------------------------------------------

[aic78u2_Inst.NT.Services]
AddService = aic78u2, 0x2, aic78u2_Service_Inst, Miniport_EventLog_Inst,System,

[aic78u2_Service_Inst]
ServiceType    = 1      ; SERVICE_KERNEL_DRIVER
StartType      = 0      ; SERVICE_BOOT_START
ErrorControl   = 1      ; SERVICE_ERROR_NORMAL
ServiceBinary  = %12%\aic78u2.sys
LoadOrderGroup = SCSI Miniport
AddReg         = pnpsafe_pci_addreg

[pnpsafe_pci_addreg]
HKR, "Parameters\PnpInterface", "5", 0x00010001, 0x00000001

;[num_of_requests]
HKLM,"SYSTEM\CurrentControlSet\Services\adpu160m\Parameters\Device","NumberOfRequests",0x10001,255

;----------------------------------------------------------------
;
; Event Log Install
;
;The NT EventLog entries are the same for all SCSI miniports.
;
;----------------------------------------------------------------
[Miniport_EventLog_Inst]
AddReg = Miniport_EventLog_AddReg

[Miniport_EventLog_AddReg]
HKR,,EventMessageFile,0x00020000,"%%SystemRoot%%\System32\IoLogMsg.dll"
HKR,,TypesSupported,0x00010001,7

;----------------------------------------------------------------
;
; [DestinationDirs]
;
; file-list-section=dirid[,subdir]] ... 
;
;----------------------------------------------------------------
[DestinationDirs]
DefaultDestDir = 12             ; DIRID_DRIVERS (this is IOSubsys on
                                ; Win95, and System32\Drivers on NT)

;----------------------------------------------------------------
;
; [Strings]
;
;----------------------------------------------------------------
[Strings]
INF_PROVIDER="Adaptec"
ADP="Adaptec"
FLOPPY_DESCRIPTION="Windows 2000 Driver Set v1.00"

PCI\VEN_9005&DEV_0010.DeviceDesc = "Adaptec AHA-2940U2/U2W - Ultra2 SCSI"
PCI\VEN_9005&DEV_001F.DeviceDesc = "Adaptec AIC-7890/7891 - Ultra2 SCSI"
PCI\VEN_9005&DEV_0050.DeviceDesc = "Adaptec AHA-3950 - Ultra2 SCSI"
PCI\VEN_9005&DEV_0051.DeviceDesc = "Adaptec AHA-3950 - Ultra2 SCSI"
PCI\VEN_9005&DEV_005F.DeviceDesc = "Adaptec AIC-7896/7897 - Ultra2 SCSI"
PCI\VEN_9005&DEV_0010&SUBSYS_21809005.DeviceDesc = "Adaptec AHA-2940U2 - Ultra2 SCSI"
PCI\VEN_9005&DEV_0010&SUBSYS_81009005.DeviceDesc = "Adaptec AHA-2940U2B - Ultra2 SCSI"
PCI\VEN_9005&DEV_0010&SUBSYS_A1809005.DeviceDesc = "Adaptec AHA-2940U2W - Ultra2 SCSI"
PCI\VEN_9005&DEV_0010&SUBSYS_E1009005.DeviceDesc = "Adaptec AHA-2950U2B - Ultra2 SCSI"
PCI\VEN_9005&DEV_0050&SUBSYS_F5009005.DeviceDesc = "Adaptec AHA-3950U2B - Ultra2 SCSI"
PCI\VEN_9005&DEV_0051&SUBSYS_B5009005.DeviceDesc = "Adaptec AHA-3950U2D - Ultra2 SCSI"


Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: ftp, load: 1.91