#
| README file for
|
| ELSA MicroLink ISDN/PCFpro, Ver. 1.75
|
| Copyright (c) 1993-96 ELSA GmbH, Aachen (Germany)
|
| Subsidary:
| ELSA GmbH ELSA Inc.
| Sonnenweg 11 2041 Mission College Blvd.
| D-52070 Aachen Suite 165
| Germany Santa Clara, CA 95054
| USA
|
| Phone : +49-241-9177-0 Phone: +1-408-565-9669
| Support Fax: +49-241-9177-113 Phone: 1-800-272-ELSA
| BBS (modem): +49-241-9177-981 Fax : +1-408-565-9650
| BBS (ISDN) : +49-241-9177-7800 BBS : +1-408-565-9630
| CompuServe : GO ELSA CIS : GO ELSA
| WWW : http://www.elsa.de WWW : http://www.elsa.com
|
| 12/14/95, ig, wf
Table of Contents
1. Overview
2. Disk Contents
3. Installation
4. Notes
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
1. Overview
This file contains notes and changes to the MicroLink
ISDN/PCFpro drivers.
2. Disk Contents
The driver disk contains the following files:
README.TXT this file
CSSELPFP.INF Installation file for Win95.
CSSELPFP.VXD CAPI version 2.0 driver for MicroLink ISDN/PCFpro
D channel protocol : DSS1
B channel protocols: HDLC transparent, bit transparent, X.75, T.70NL
3. Short installation:
Complete installation instructions can be found in the manual.
This is only a SHORT reference!
a.) Choose the COM port using the DIP switches.
The standard configuration is:
I/O address ISDN sector......: 0x160H
IRQ ISDN sector..............: IRQ 10
If you want a different setting, please read your manual or
have a look on your board.
b.) Install the MicroLink ISDN/PCFpro board in your PC
considering the usual safety rules (look manual).
c.) Install DFUe-Network als descriped in Help of Win95.
d.) Install "ELSA-ISDN/PCFpro" as a network adapter. Change to
this media.
e.) Install "CAPI 2.0" as a network protocol.
f.) Restart your computer.
4. Notes:
The manual is corresponding to the latest release. The latest
information you will always find in the Support BBS ELSA ONLINE.
If you need a CAPI 1.1 please read intall notes for the normal
DOS-Driver for Win95.
Have fun with your MicroLink ISDN/PCFpro board.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.