#
| README file for
|
| OS/2 CAPI 1.1-Driver for ELSA MicroLink ISDN/PCFpro, Ver. 1.75
|
| Copyright (c) 1994-96 ELSA GmbH, Aachen (Germany)
|
| Subsidary:
| ELSA GmbH ELSA Inc.
| Sonnenweg 11 2041 Mission College Blvd.
| D-52070 Aachen Suite 165
| Germany Santa Clara, CA 95054
| USA
|
| Phone : +49-241-9177-0 Phone: +1-408-565-9669
| Support Fax: +49-241-9177-113 Phone: 1-800-272-ELSA
| BBS (modem): +49-241-9177-981 Fax : +1-408-565-9650
| BBS (ISDN) : +49-241-9177-7800 BBS : +1-408-565-9630
| CompuServe : GO ELSA CIS : GO ELSA
| WWW : http://www.elsa.de WWW : http://www.elsa.com
|
| 12/14/95, cw
Table of Contents
1. Overview
2. Contents
3. Installation
4. Notes
------------------------------------------------------------------------
1. Overview
This directory contains the OS/2 CAPI 1.1-Driver for
ELSA MicroLink ISDN/PCFpro, Ver. 1.75
-------------------------------------------------------------------------------
1. Contents:
README.TXT This file
LIESMICH.TXT German Version
ISDNCAPX.SYS ISDN/PCFpro Driver for national ISDN (1TR6)
DSS1CAPX.SYS ISDN/PCFpro Driver for EuroISDN (DSS1)
CAPI.DLL CAPI Dynamic Link Library for OS/2
OS2_DSS1.DDP Installation-Script for EuroISDN (DSS1)
OS2_1TR6.DDP Installation-Script for national ISDN (1TR6)
-------------------------------------------------------------------------------
2. Installation:
Do the following steps:
a) Insert the ELSA CAPI-Driver disk in your drive.
b) Start the Object "Device Driver Install" (it is located in
the Folder "System Setup")
c) Change the source to the directory with the OS/2 CAPI-Driver.
d) Click on "Install".
e) Choose the desired OS/2 CAPI-Driver (according to the
D-Channel Protocol).
f) Click on "OK".
g) The driver is installed now. Click on "Exit" and answer
the question "Exit the program?" with "Yes".
h) Shut down your system!
-------------------------------------------------------------------------------
3. Notes:
a) If you are using EuroISDN (DSS1), you need to perform an
EAZ/MSN Mapping. This is described in the manual.
b) If you are working with a MicroLink ISDN/PCF or ISDN/PCFpro, you
can use the analog services.
The following settings need to be configured in the application:
B2 Protocol : 0x0C
B3 Protocol : 0x04
Service Indicator : 0x02
Additional Serv. : 0x01
To get back to ISDN X.75, apply the following settings:
B2 Protocol : 0x01
B3 Protocol : 0x04
Service Indicator : 0x07
Additional Serv. : 0x00
Examples:
In ZOC's, Version 2.09b and above, ISDN Device-Options you can
select "ELSA analog" directly. This is all you have to do.
To configure ZOC for ISDN X.75, choose "Standard options" in
the same menu.
For cFos/2 use the following AT-Commands:
AT S16=2 S17=1 S20=12 S21=4
From now on all dial-tries will be used to establish an
analog connection.
Use
AT S16=7 S17=0 S20=1 S21=4
to get back to ISDN X.75.
-------------------------------------------------------------------------------
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.