1. ISDNPFP.EXE Driver
2. README.TXT File Contents

README.TXT Driver File Contents (ISDNPFP.EXE)

        #
        | README file for
        |
        | ELSA MicroLink ISDN/PCFpro, Ver. 1.75
        |
        | Copyright (c) 1993-96 ELSA GmbH, Aachen (Germany)
        |
        |                                     Subsidary:
        | ELSA GmbH                           ELSA Inc.
        | Sonnenweg 11                        2041 Mission College Blvd.
        | D-52070 Aachen                      Suite 165
        | Germany                             Santa Clara, CA 95054
        |                                     USA
        |
        | Phone      : +49-241-9177-0         Phone: +1-408-565-9669
        | Support Fax: +49-241-9177-113       Phone:  1-800-272-ELSA
        | BBS (modem): +49-241-9177-981       Fax  : +1-408-565-9650
        | BBS (ISDN) : +49-241-9177-7800      BBS  : +1-408-565-9630
        | CompuServe : GO ELSA                CIS  : GO ELSA
        | WWW        : http://www.elsa.de     WWW  : http://www.elsa.com
        |
        | 12/14/95, ig

        Table of Contents

        1.      Overview
        2.      Contents
        3.      Installation
        4.      Notes


- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

1.      Overview

        This directory contains notes and changes to the MicroLink
        ISDN/PCFpro drivers.

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

2.      Contents

        This directory contains the following files:

        README.TXT   this file
        LIESMICH.TXT german version

        [DOS]

        ISDNCAPI.EXE  CAPI version 1.1 driver for MicroLink ISDN/PCFpro
        D channel protocol : 1TR6
        B channel protocols: HDLC transparent, bit transparent, X.75, T.70NL

        ISDNCAPX.EXE  CAPI version 1.1 driver for MicroLink ISDN/PCFpro
        D channel protocol : 1TR6
        B channel protocols: HDLC transparent, bit transparent, X.75, T.70NL,
                             ISO 8208 (X.25), T.90,
                             modem function (V.34), fax group 3 function

        ISDNCAPP.EXE  CAPI version 1.1 driver for MicroLink ISDN/PCFpro
        D channel protocol : Point to Point (1TR6)
        B channel protocols: HDLC transparent, bit transparent, X.75, T.70NL,
                             ISO 8208 (X.25), T.90,
                             modem function (V.34), fax group 3 function

        DSS1CAPI.EXE  CAPI version 1.1 driver for MicroLink ISDN/PCFpro
        D channel protocol : DSS1
        B channel protocols: HDLC transparent, bit transparent, X.75, T.70NL

        DSS1CAPX.EXE  CAPI version 1.1 driver for MicroLink ISDN/PCFpro
        D channel protocol : DSS1
        B channel protocols: HDLC transparent, bit transparent, X.75, T.70NL,
                             ISO 8208 (X.25), T.90
                             modem function (V.34), fax group 3 function

        DSS1CAPP.EXE  CAPI version 1.1 driver for MicroLink ISDN/PCFpro
        D channel protocol : Point to Point (DSS1)
        B channel protocols: HDLC transparent, bit transparent, X.75, T.70NL,
                             ISO 8208 (X.25), T.90
                             modem function (V.34), fax group 3 function

        DSS1C20X.EXE  CAPI version 2.0 driver for MicroLink ISDN/PCFpro
        D channel protocol : DSS1
        B channel protocols: HDLC transparent, bit transparent, X.75, T.70NL,
                             ISO 8208 (X.25), T.90
                             modem function (V.34), fax group 3 function

        ATCAPI.COM    FOSSIL driver for the CAPI driver
        ATCAPI.ASC    documentation for the FOSSIL driver
	ISDNMON.EXE   ELSA ISDNmonitor for DOS



- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

3.      Short installation:

        Complete installation instructions can be found
        in the manual. This is only a SHORT reference!

        a.) Choose the COM port using the DIP switches.

            The standard configuration is:

            I/O address ISDN sector......: 0x160H
            IRQ ISDN sector..............: IRQ 10

            If you want an different setting, please read your manual or
            have a look on your board.

        b.) Install the MicroLink ISDN/PCFpro board in your PC
            considering the usual safety rules (look manual).

        c.) Load the desired driver. Consider the D channel
            protocol of your ISDN line (DSS1 or 1TR6) and the selected
            B channel protocols (with or without ISO 8208 / T.90).

        d.) To use the driver under WINDOWS '95 please add the call
            to the AUTOEXEC.BAT.

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

4.      Notes:

        The manual may not be corresponding to the latest release. The latest
        information you will always find in the Support BBS ELSA ONLINE.


        Have fun with your MicroLink ISDN/PCFpro board.

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

• Expand the archive file (if the download file is in zip or rar format).

• If the expanded file has an .exe extension, double click it and follow the installation instructions.

• Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

• Find the device and model you want to update in the device list.

• Double-click on it to open the Properties dialog box.

• From the Properties dialog box, select the Driver tab.

• Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.