Updating the JV-1010 Operating System from Standard MIDI Files Use the following procedure to update the JV-1010 to the latest system version. The updated software is provided as 15 Standard MIDI Files, on a DOS or Macintosh formatted disk. The tools required are: * MIDI sequencer (software or hardware) that can load DOS or Macintosh Standard MIDI Files * MIDI cable * JV-1010 * JV-1010 System Software update disk Update Procedure 1) Power off the JV-1010 and connect the MIDI OUT port of the sequencer to the MIDI IN port of the JV-1010. 2) Rotate the PART dial to select 14, then rotate the CATEGORY dial to select Guitar/Bass. 3) Power on the JV-1010 while holding down VOLUME and VALUE. 4) After 3 seconds, release the dials and then press VOLUME again. The display should read "nid." 5) Play all Standard MIDI Files from the MIDI sequencer in sequential order. 6) After all SMF's have been played, power off. The system software of the JV-1010 has now been updated. You should reset the JV-1010 after it is updated: **Warning: When you reset the JV-1010, all user parameters will be erased and set to the factory settings.** 1) Power on the JV-1010 2) Press the VALUE dial to select any mode except PATCH mode. 3) While holding VOLUME, press VALUE. 4) Rotate the CATEGORY dial to select Piano. The screen will display "Fct." 5) Press VALUE, the screen will display "Sur." 6) Press VALUE again to perform the factory reset. (c)2000 Roland Corporation U.S. Updating the JV-1010 Operating SystemDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.