***GT-6 System Update*** **NOTE: All USER datat will be overwritten when updating the GT-6. Please backup all important information before updating. *Tools Needed* 1. GT-6 2. Update Disks 3. MIDI Cable 4. MIDI sequencer capable of playing SMFs *Update procedure* 1. Connect the MIDI in of the GT-6 to the MIDI Out of the Sequencer 2. Power on while holding "FX-2", "PEDAL ASSIGN" and "UTILITY" 3. When "Waiting SMF Data [GT6_01.mid]" is displayed, play file "GT6_01.mid" 4. After first song is sent the GT-6 will write the data to the flash rom. 5. When "Waiting SMF Data [GT6_02.mid]" is displayed, play file "GT6_01.mid" 6. Repeat steps 4 and 5 for each file. Be sure not to send SMF data until prompted by the display 7. When all files are sent to the GT-6, the checksum will be displayed 8. Power off unit and perform Factory Reset *Factory Reset* 1. Power on while holding "PREAMP/SPEAKER ON/OFF" and "TYPE VARIATION" 2. Cursor Right > and rotate VALUE dial to select "SYSTEM > SYSTEM" 3. Press ENTERDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.