tiauxln.inf Driver File Contents (CJT800_ADT_421212.zip)

;
; TIAUXLN.INF
;
; Win2k/Win9x Installation file for AU5 USB DSL Modem
; 
; Copyright (c) 2000-2002 All Rights Reserved, Texas Instruments Incorporated
;     

[Version]
;CatalogFile=tiauxln.cat
Signature = "$Windows NT$"
Provider  = %TI%
Class     = Net
ClassGUID={4d36e972-e325-11ce-bfc1-08002be10318}
DriverVer=04/02/2002,3.2.4.2

[Manufacturer]
%TI% = TexasInstruments

; pnp cards should be excluded from select
[ControlFlags]
ExcludeFromSelect = USB\VID_0451&PID_6001

[TexasInstruments]
%USB\VID_0451&PID_6001.DeviceDesc% = TIDSLU, USB\VID_0451&PID_6001

;
; This section is necessary for the tool
;
[TI3000P.ndi]
AddReg=TIDSLU.id.reg

[TIDSLU.ndi]
AddReg=TIDSLU.id.reg, TIDSLUParams.reg, TIDSLU.win.reg

; TI USB DSL AU5 modem
;

; Windows 2000 specific entry
[TIDSLU.NT]
BusType         = 15	; PnP Bus
AddReg          = TIDSLU.ndi.reg.NT, TIDSLUParams.reg
Characteristics = 0x84
CopyFiles       = TIDSLU.CopyFiles.NT, TIDSLU.binFiles.NT


;-----------------------------------------------------------------------------
; TIDSLU Win2K specific
;

[TIDSLU.ndi.reg.NT]
HKR, Ndi,               Service,    0,  "TIAU5LN"
HKR, Ndi\Interfaces,    LowerRange, 0,  "ethernet"
HKR, Ndi\Interfaces,    UpperRange, 0,  "ndis5"

[TIDSLU.NT.Services]
AddService = TIAU5LN, 2, TIDSLU.Service, TIDSLU.EventLog

[TIDSLU.Service]
DisplayName     = %TIDSLU.Service.DispName%
ServiceType     = 1 ;%SERVICE_KERNEL_DRIVER%
StartType       = 3 ;%SERVICE_DEMAND_START%
ErrorControl    = 1 ;%SERVICE_ERROR_NORMAL%
ServiceBinary   = %12%\TIAU5LN.sys
LoadOrderGroup  = NDIS

[TIDSLU.EventLog]
AddReg = TIDSLU.AddEventLog.reg

[TIDSLU.AddEventLog.reg]
HKR, , EventMessageFile, 0x00020000, "%%SystemRoot%%\System32\netevent.dll"
HKR, , TypesSupported,   0x00010001, 7

[TIDSLU.CopyFiles.NT]
;TIAU5LN.SYS
;TIAU5BT.SYS
;TIAU5TP.BIN
;TIAU5FW.BIN

[TIDSLU.binFiles.NT]
;TIAU5LN.SYS
;TIAU5BT.SYS
;TIAU5TP.BIN
;TIAU5FW.BIN

;
; Windows9x specific 
;
[TIDSLU]
AddReg=TIDSLU.id.reg, TIDSLUParams.reg, TIDSLU.win.reg, TIDSLU.Install
DeviceID  = "USB\VID_0451&PID_6001"

[TIDSLU.Install]
HKR,Ndi\Install,,,"TIDSLU.Copy"
HKR,Ndi\Remove,,,"TIDSLU.Remove"

;----------------------------------------------------------------------------
; Win9x id registry sections
; These are not needed by Win2K

[TIDSLU.id.reg]
HKR, Ndi, DeviceID, 0, "USB\VID_0451&PID_6001"
HKR, Ndi, HelpText, 0, %DSLAdapterHelpText%

;-----------------------------------------------------------------------------
; TIDSLU common
;
[TIDSLUParams.reg]

HKR, Ndi\Params\PVCEncapsulation, ParamDesc,,"Encapsulation Type"
HKR, Ndi\Params\PVCEncapsulation, Type,, "enum"
HKR, Ndi\Params\PVCEncapsulation, Default,,"2"
HKR, Ndi\Params\PVCEncapsulation\enum,"2",,"RFC1483(LLC/SNAP Bridged)"
HKR, Ndi\Params\PVCEncapsulation\enum,"3",,"RFC1483(LLC/SNAP Routed)"
HKR, Ndi\Params\PVCEncapsulation\enum,"4",,"xReserved"
HKR, Ndi\Params\PVCEncapsulation\enum,"5",,"xReserved"
HKR, Ndi\Params\PVCEncapsulation\enum,"6",,"RFC1577(CIPoATM)"

HKR, Ndi\Params\PVCSDUsize, ParamDesc, ,"SDU Size"
HKR, Ndi\Params\PVCSDUsize, Type, , "int"
HKR, Ndi\Params\PVCSDUsize, Default, ,  "1500"
HKR, Ndi\Params\PVCSDUsize, Min, , "1500"
HKR, Ndi\Params\PVCSDUsize, Max, , "32000"
HKR, Ndi\Params\PVCSDUsize, Step, , "1"
HKR, Ndi\Params\PVCSDUsize, Base, , "10"

HKR, Ndi\Params\PVCVCI, ParamDesc, ,"VCI value"
HKR, Ndi\Params\PVCVCI, Type, , "int"
HKR, Ndi\Params\PVCVCI, Default, ,  "35"
HKR, Ndi\Params\PVCVCI, Min, , "32"
HKR, Ndi\Params\PVCVCI, Max, , "1024"
HKR, Ndi\Params\PVCVCI, Step, , "1"
HKR, Ndi\Params\PVCVCI, Base, , "10"

HKR, Ndi\Params\PVCVPI, ParamDesc, ,"VPI value"
HKR, Ndi\Params\PVCVPI, Type, , "int"
HKR, Ndi\Params\PVCVPI, Default, ,  "0"
HKR, Ndi\Params\PVCVPI, Min, , "0"
HKR, Ndi\Params\PVCVPI, Max, , "255"
HKR, Ndi\Params\PVCVPI, Step, , "1"
HKR, Ndi\Params\PVCVPI, Base, , "10"

HKR, Ndi\Params\xDSLmodulation, ParamDesc, ,"Modulation Type"
HKR, Ndi\Params\xDSLmodulation, Type,, "enum"
HKR, Ndi\Params\xDSLmodulation, Default,,"1"
HKR, Ndi\Params\xDSLmodulation\enum,"0",,"T1.413"
HKR, Ndi\Params\xDSLmodulation\enum,"1",,"Multi Mode"
HKR, Ndi\Params\xDSLmodulation\enum,"2",,"G.DMT"

HKR, Ndi\Params\LanAutoConnect, ParamDesc, ,"Auto Connect to Network"
HKR, Ndi\Params\LanAutoConnect, Type,, "enum"
HKR, Ndi\Params\LanAutoConnect, Default,,"1"
HKR, Ndi\Params\LanAutoConnect\enum,"1",,"Yes"
HKR, Ndi\Params\LanAutoConnect\enum,"0",,"No"

HKR, Ndi\Params\RJ11PairSelect, ParamDesc, ,"RJ-11 Line Pair Selection"
HKR, Ndi\Params\RJ11PairSelect, Type,,"enum"
HKR, Ndi\Params\RJ11PairSelect, Default,,"0"
HKR, Ndi\Params\RJ11PairSelect\enum,"0",,"Inner Pair"
HKR, Ndi\Params\RJ11PairSelect\enum,"1",,"Outer Pair"
HKR, Ndi\Params\RJ11PairSelect\enum,"2",,"Auto Detect"

HKR, Ndi\Params\ModemCodeFile, ParamDesc, ,"Modem Code Filename"
HKR, Ndi\Params\ModemCodeFile, Type,,"edit"
HKR, Ndi\Params\ModemCodeFile, Default,,"tiau5tp.bin"

;HKR, Ndi\Params\GLITEModemCode, ParamDesc, ,"G.LITE Modem Code"
;HKR, Ndi\Params\GLITEModemCode, Type,,"edit"
;HKR, Ndi\Params\GLITEModemCode, Default,,"tiau5lp.bin"

;HKR, Ndi\Params\GDMTModemCode, ParamDesc, ,"G.DMT Modem Code"
;HKR, Ndi\Params\GDMTModemCode, Type,,"edit"
;HKR, Ndi\Params\GDMTModemCode, Default,,"tiau5dp.bin"

HKR, Ndi\Params\DriverDescription, ParamDesc, ,"Driver Description"
HKR, Ndi\Params\DriverDescription, Type, ,"edit"
HKR, Ndi\Params\DriverDescription, LimitText, ,"64"
HKR, Ndi\Params\DriverDescription, Default,,"AU5 USB DSL Modem"

;----------------------------------------------------------------------------
; TIDSLU Win9x specific
;

[TIDSLU.win.reg]
; key,subkey,valuename,type,value
HKR, ,              DevLoader,          0, "*ndis"
HKR, ,              DeviceVxDs,         0, "TIAU5LN.SYS"
HKR, ,              EnumPropPages,      0, "netdi.dll,EnumPropPages"

;NDIS info
HKR, NDIS,          LogDriverName,      0, "TIAU5LN"
HKR, NDIS,          MajorNdisVersion,   1, 03
HKR, NDIS,          MinorNdisVersion,   1, 0A

HKR, Ndi\Interfaces,DefLower,   	0, "ethernet"
HKR, Ndi\Interfaces,LowerRange, 	0, "ethernet"
HKR, Ndi\Interfaces,DefUpper,   	0, "ndis3,ndis4,ndis5"
HKR, Ndi\Interfaces,UpperRange, 	0, "ndis3,ndis4,ndis5"

; Required Components
HKR, Ndi, InstallInf,,"TIAUXLN.INF"

[TIDSLU.Copy]
CopyFiles=TIDSLU.CopyFiles

[TIDSLU.Remove]
DelFiles=TIDSLU.CopyFiles

[TIDSLU.CopyFiles]
;TIAU5LN.SYS
;TIAU5BT.SYS
;TIAU5TP.BIN
;TIAU5FW.BIN

;
; Common sections
;
[DestinationDirs]
DefaultDestDir  = 12 ; System Directory
TIDSLU.CopyFiles = 11
TIDSLU.binFiles.NT = 10,system     ; also copy bin files to system dir because of a bug on ME

[SourceDisksNames]
1 = %DiskName%,,,

[SourceDisksFiles]
TIAU5LN.SYS   = 1 
TIAU5BT.SYS   = 1 
TIAU5TP.BIN   = 1
TIAU5FW.BIN   = 1

[Strings]
TI="Texas Instruments"
USB\VID_0451&PID_6001.DeviceDesc = "AU5 USB DSL Modem"
TIDSLU.Service.DispName = "AU5 USB DSL Modem(LAN)"
DSLAdapterHelpText= "A DSL Adapter provides high speed connection to the Internet through a phone line"
DiskName="AU5 USB DSL Modem Installation Disk"
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web2, load: 0.86