1. DIFATv1022.zip Driver
2. readme.txt File Contents

readme.txt Driver File Contents (DIFATv1022.zip)

Updating the DIF-AT from Standard MIDI Files

DIF-AT system software is supplied as 4 files in
Standard MIDI File (SMF) format.

Tools required:
* A product with MIDI In and R-BUS connection,
  such as the VM-3100Pro (used in this example)
* MIDI Sequencer capable of reading and
  transmitting SMFs with System Exclusive messages
* MIDI Cable
* R-BUS Cable
* System Update files

HOW TO UPDATE THE SYSTEM

1) Using R-BUS cable, connect R-BUS terminal of
   DIF-AT to R-BUS terminal of VM-3100Pro.
2) Using MIDI cable, connect the MIDI OUT of the
   sequencer to the MIDI IN of the VM-3100Pro.
3) Power on the VM-3100Pro while holding the
   Channels 6 and 9/10 SELECT buttons.
4) CURSOR to "03:DIF-AT Update," and press ENTER.
5) Load and play the update files from the MIDI
   Sequencer in order.
6) The ADAT and TASCAM leds will light when the
   update procedure is completed.
7) Power off and on the VM-3100Pro and the DIF-AT.

VERSION CONFIRMATION

1) Using R-BUS cable, connect R-BUS terminal of
   DIF-AT to R-BUS terminal of VM-3100Pro.
2) Power on the VM-3100Pro while holding the
   Channels 6 and 9/10 SELECT buttons.
3) CURSOR to "02:DIF-AT Check," and press ENTER.
4) Press F4 to display the system version.
5) Power off and on the VM-3100Pro and the DIF-AT.

(c)1999 Roland Corporation U.S.