AD2L BIOS v.R01-A0E
--------------------------------------------------------------------------------------------
-- How to flash Bios------------------------------------------------------------------------
---Flash under boot block---
Step 1. Execute "WINCRIS.EXE" file in the "CRISDISK" folder under windows,
or execute "WINCRIS.BAT" file under DOS
Step 2. Follow the steps to create Crisis disk
Step 3. Put Crisis disk into FDD
Step 4. Press "Fn" + "Esc" + "Power buttons" to enable boot block
Step 5. After beep stop, remove the disk and restart system
---flash under DOS---
Step 1. Create a bootable disk.
Step 2. Copy all the files in the "DOS" folder to the bootable disk if you get a
source disk.
Step 3. Boot to pure DOS.(It is better not to load HIMEM.sys)
Step 4. To flash BIOS by Phoenix flash utility, use ".wph" ROM file,
and update BIOS via the following command:
AD2L.bat
or,
phlash16 /s /c /x /BBL /mode=3 AD2LA0E.wph
---flash under Windows---
Step 1. Excute the "AD2LA0E.exe" in "Windows" folder in Windows environment
Step 2. Follow the steps to flash BIOS
---------------------------------------------------------------------------------------------
-- How to check Bios Version-----------------------------------------------------------------
When system POST, press F2 to enter Bios setup menu then select BIOS information.
---------------------------------------------------------------------------------------------
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.