================================================================= Wistron BIOS Reflash Disk Readme File Version A1E3,Sep 25, 2001 New Technology Development Dept. Platform Software Div. Copyright (C) Wistron Incorported 2001. All rights reserved. ================================================================= I. INTRODUCTION This utility is designed to perform BIOS reflashing to an upper version for REX system : II. PREPARING A BOOTABLE BIOS REFLASH DISK AND USE IT There may be two types of source you will get: .A ZIP package file, or .A source disk with uncompressed files Step 1. Create a bootable disk. Step 2. Copy the following files to that bootable disk. .ANSI.SYS (You can find this file in \windows\command or \windows) General Syntax: copy [source path] [destination path] 1. copy ansi.sys a:\ Step 3. Decompress the ZIP file to this bootable disk if you get a ZIP package,or copy all the files to the bootable disk if you get a source disk. Step 4. Put the bootable disk into Falcon series mobile, then boot. III. USING THE Wistron REX BIOS REFLASH DISK # NOTICE !! Important !! # # " Do not power off during a BIOS update. Otherwise your system # # may be damaged " # A. After Booting, You will see the massage like this (BIOS Version may be different): Wistron REX BIOS Flash Service Diskette BIOS Version A1E3 Licensed Material - Property of Wistron (C) Copyright Wistron Corp. 2001 All Rights Reserved. This utility updates the system program to the current level. Press <1> to continue, <0> to exit. >>>>>>>>>>>>>>>>>>>>>> Important <<<<<<<<<<<<<<<<<<<<<< Do not power off during a BIOS update. Otherwise your system may be damaged. B. If you are ready to reflash BIOS, press "1", Otherwise press "0". If you press "1", the reflash utility will check if this machine is Acer Falcon series. If yes, You will see this massage: Wistron REX BIOS Flash Service Diskette >> Warning << Continuing with this process will install downlevel system program than currently installed in the system. If unsure, do not continue. Press <1> to continue, <0> to exit." C. Press "1" to make sure again. The BIOS reflash utility will re-check your system and begin to update your BIOS to version a1e3. D. If the BIOS reflash is done successful, you will see: Wistron REX BIOS Flash Service Diskette System BIOS has been updated successfully. Remove your service Diskette from Disk Drive. Turn off the power and restart the system. E. Turn off power by power button, (not Ctl+Alt+Del) and next power on will be booting at BIOS version a1e3. IV.Error massages: A. HardWare Error Wistron REX BIOS Flash Service Diskette >> Error << A hardware error occurred. B. BIOS Update Program Error Wistron REX BIOS Flash Service Diskette System BIOS update program has been cancelled. Turn off the power and restart the system. C. System Error Wistron REX BIOS Flash Service Diskette >> Error << This diskette does not support this system.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.