1. lnd100.exe Driver
  2. OEMSETNT.INF File Contents

OEMSETNT.INF Driver File Contents (lnd100.exe)

; OEMSETNT.INF
;
; Version 1.00
;

[Identification]
    OptionType = NetAdapter
[PlatformsSupported]
    ISA
    EISA
    "Jazz-Internal Bus"
    PCI
    PCMCIA
[Options]
    LNDX100

[MemoryChoices]
Memory_0 = "0x0f000000/0x5000",251678720
Memory_1 = "0x0f010000/0x5800",251746304
Memory_2 = "0x0f020000/0x6000",251813888
Memory_3 = "0x0f030000/0x6800",251881472
Memory_4 = "0x0f040000/0x7000",251949056
Memory_5 = "0x0f050000/0x7800",252016640
Memory_6 = "0x0f060000/0x8000",252084224
Memory_7 = "0x0f070000/0x8800",252151808
Memory_8 = "0x0f080000/0x9000",252219392
Memory_9 = "0x0f090000/0x9800",252286976

[InterruptChoices]
IRQ_0 = "3", 3
IRQ_1 = "4", 4
IRQ_2 = "5", 5
IRQ_3 = "7", 7
IRQ_4 = "9", 9
IRQ_5 = "10", 10
IRQ_6 = "11", 11
IRQ_7 = "12", 12
IRQ_8 = "13", 13
IRQ_9 = "14", 14
IRQ_10 = "15", 15
IRQ_11 = "Default", 255

[ConnectionChoices]
Connect_0 = "AutoSense" , 0
Connect_1 = "AutoSense No_Nway" , 6
Connect_2 = "100BaseTx" , 8
Connect_3 = "100BaseTx Full_Duplex" , 9
Connect_4 = "10BaseT (Twisted_Pair)" , 2
Connect_5 = "10BaseT Full_Duplex" , 3
Connect_6 = "10BaseT No_Link_Test" , 4

[StoreAndForwardChoices]
StFd_0 = "Enabled" , 1
StFd_1 = "Disabled" , 0

[FileConstants]
UtilityInf      = "UTILITY.INF"
subroutineinf   = "SUBROUTN.INF"
Enviroment      = "WindowsNT"
SoftwareType    = "driver"
Exit_Code       = 0
NetEventDLL     = "%SystemRoot%\System32\netevent.dll"
IoLogMsgDLL     = "%SystemRoot%\System32\IoLogMsg.dll"
Manufacturer    = "Microsoft"
ProductMajorVersion     = "3"
ProductMinorVersion     = "1"
ProductVersion  = $(ProductMajorVersion)"."$(ProductMinorVersion)
ProductSoftwareName     = "LNDX100"
ProductSoftwareImagePath = "\SystemRoot\System32\drivers\LNDX100.sys"
NetRuleSoftwareType     = "LNDX100Sys ndisDriver LNDX100Driver"
NetRuleSoftwareUse      = $(SoftwareType)
NetRuleSoftwareBindForm = """LNDX100Sys"" yes no container"
NetRuleSoftwareClass    = {"LNDX100Driver basic"}
NetRuleSoftwareBindable = {"LNDX100Driver LNDX100Adapter non exclusive 100"}
ProductHardwareName     = "LNDX100"
NetRuleHardwareType     = "LNDX100 LNDX100Adapter"
NetRuleHardwareBindForm = " yes yes container"
NetRuleHardwareClass    = {"LNDX100Adapter basic"}
ProductKeyName  = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName    = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"

; 1998.9.30
PCCardDBKeyName = $(!NTN_ServiceBase)"\Pcmcia\DataBase"
ManufactureKey = $(PCCardDBKeyName)"\CardBus\FastEthernet"
CardwizDataBase = $(!NTN_ServiceBase)"\resman"
CWZManufactureKey = $(CardwizDataBase)"\MacDataBase\CardBus\FastEthernet"
; !

[GeneralConstants]
from      = ""
to        = ""
ExitCodeOk     = 0
ExitCodeCancel = 1
ExitCodeFatal  = 2
KeyNull         = ""
MAXIMUM_ALLOWED   = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct      = ""
KeyParameters   = ""
TRUE            = 1
FALSE           = 0
NoTitle            = 0
ExitState   = "Active"
OldVersionExisted = $(FALSE)
DriverPath      = $(!STF_NTPATH)\drivers

[date]
    Now = {} ? $(!LIBHANDLE) GetSystemDate

[Identify]
    read-syms Identification
    shell "" DebugControl
    set Status     = STATUS_SUCCESSFUL
    set Identifier = $(OptionType)
    set Media      = #("Source Media Descriptions", 1, 1)
    Return $(Status) $(Identifier) $(Media)

[ReturnOptions]

    shell "" DebugControl
    set Status        = STATUS_FAILED
    set OptionList     = {}
    set OptionTextList = {}
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) in $(LanguageList)
        ifstr(i) $($1) == ""
           goto returnoptions
        endif
        set PlatformList = ^(PlatformsSupported, 1)
        Ifcontains(i) $($1) in $(PlatformList)
           goto returnoptions
        else
           set Status = STATUS_NOTSUPPORTED
           goto finish_ReturnOptions
        endif
    else
        set Status = STATUS_NOLANGUAGE
        goto finish_ReturnOptions
    endif
returnoptions = +
    set OptionList     = ^(Options, 1)
    set OptionTextList = ^(OptionsText$($0), 1)
    set Status         = STATUS_SUCCESSFUL
finish_ReturnOptions = +
    Return $(Status) $(OptionList) $(OptionTextList)
[InstallOption]
    set Option   = $($1)
    set SrcDir   = $($2)
    set AddCopy  = $($3)
    set DoCopy   = $($4)
    set DoConfig = $($5)
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) NOT-IN $(LanguageList)
        Return STATUS_NOLANGUAGE
    endif
    Debug-Output "OEMNADSI.INF: STF_CWDDIR is: "$(!STF_CWDDIR)
    Debug-Output "OEMNADSI.INF: STF_LANGUAGE is: "$(!STF_LANGUAGE)
    set-subst LF = "\n"
    read-syms GeneralConstants
    read-syms FileConstants
    read-syms DialogConstants$(!STF_LANGUAGE)
    ifstr(i) $(!NTN_Origination) == "NCPA"
        set Continue = $(OK)
    endif
    read-syms FileConstants$(!STF_LANGUAGE)
    detect date
    set-title  $(FunctionTitle)
    set to   = Begin
    set from = Begin
    set CommonStatus = STATUS_SUCCESSFUL
    EndWait
Begin = +

    shell "" DebugControl
    Debug-Output "LNDX100 SETUP BEGIN"
    Ifstr(i) $(!NTN_InstallMode) == deinstall
        set StartLabel = removeadapter
    else-Ifstr(i) $(!NTN_InstallMode) == Update
        set StartLabel = UpgradeSoftware
    else-Ifstr(i) $(!NTN_InstallMode) == bind
        set StartLabel = bindingadapter
    else-Ifstr(i) $(!NTN_InstallMode) == configure
        set CommonStatus = STATUS_REBOOT
        set StartLabel = configureadapter
        Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
            Debug-Output "OEMNADSI.INF: Cannot configure the driver software."
            Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                Debug-Output "OEMNADSI.INF: ShellCode error: cannot get an error string."
                goto ShellCodeError
            endif
            set Error = $($R0)
            set from = end
            set to = end
            goto nonfatalinfo
        endif
    else
        set StartLabel = installadapter
        set OEM_ABANDON_OPTIONS = {}
        set OEM_ABANDON_SOFTWARE = FALSE
        set OEM_ABANDON_ON = TRUE
    endif

    set MemoryValue = *($(MemoryList), 1)
    set InterruptValue = *($(InterruptList), 12)
    set ConnectionValue = *($(ConnectionList), 1)
    set StFdValue = *($(StFdList), 1)

    set EditTextIn = "1"
    set from = $(fatal)
    set to = $(fatal)
    goto $(StartLabel)
installadapter = +
    OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
    Ifstr $(KeyProduct) != $(KeyNull)
        CloseRegKey $(KeyProduct)
        ifstr(i) !(NTN_RegBase) == $(ProductKeyName)
           Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+
               $(ProductVersion)
           ifint $($ShellCode) != $(!SHELL_CODE_OK)
               Debug-Output "OEMNADSI.INF: ShellCode error: cannot get an error string."
               goto ShellCodeError
           endif
           goto end
        else
           Shell $(UtilityInf), CardExistedDlg
           ifint $($ShellCode) != $(!SHELL_CODE_OK)
               Debug-Output "OEMNADSI.INF: ShellCode error: cannot get an error string."
               goto ShellCodeError
           endif
           ifstr(i) $($R1) != "OK"
               set CommonStatus = STATUS_USERCANCEL
               goto end
           endif
           set OldVersionExisted = $(TRUE)
        endif
    Endif
    Goto adapteroptions
configureadapter = +
    Ifstr(i) $(KeyProduct) == $(KeyNull)
        OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
        Ifstr $(KeyProduct) == $(KeyNull)
            Set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
            Debug-Output "OEMNADSI.INF: Cannot find component product key"
           Goto fatalregistry
        Endif
    Endif
    Debug-Output "OEMNADSI.INF: INF: Shelling to FindService"
    Shell $(UtilityInf) FindService, $(KeyProduct)
    Ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Debug-Output "OEMNADSI.INF: INF: FindService shell failure"
        Goto ShellCodeError
    Endif
    Ifstr(i) $($R0) != NO_ERROR
        Debug-Output "OEMNADSI.INF: INF: FindService Shell error: "$($R0)
        Goto fatalregistry
    endif
    set KeyParameters = $($R2)
    CloseRegKey $($R1)
    Ifstr $(KeyParameters) == $(KeyNull)
        set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
        Debug-Output "OEMNADSI.INF: Cannot find component service"
        goto fatalregistry
    endif
    set OldVersionExisted = $(TRUE )
    set ValueName = ""
    set ValueData = ""
    set ValueStr  = ""
    set ValueList = {}
    EnumRegValue $(KeyParameters) ValueList
    ForListDo $(ValueList)
        set ValueItem = $($)
        set ValueName = *($(ValueItem),1)
        set ValueData = *($(ValueItem),4)
        Ifstr(i) $(ValueName) == "MemoryMapAddress"
            set MemoryValueIndex = $(ValueData)
        else-ifstr(i) $(ValueName) == "Interrupt"
            set InterruptIndex = $(ValueData)
; ++
        else-ifstr(i) $(ValueName) == "ConnectionType"
            set ConnectionIndex = $(ValueData)
        else-ifstr(i) $(ValueName) == "StoreAndForward"
            set StFdIndex = $(ValueData)

        endif
    EndForListDo
    set MemoryValue = *($(MemoryList), ~($(MemoryValues),$(MemoryValueIndex)))
    ifstr(i) $(MemoryValue) == ""
        set MemoryValue = *($(MemoryList), 1)
    endif

    set InterruptValue = *($(InterruptList), +
         ~($(InterruptValues),$(InterruptIndex)))
        Debug-Output "OEMNADSI.INF:"$(InterruptValue)
    ifstr(i) $(InterruptValue) == ""
        set InterruptValue = *($(InterruptList), 12)
    endif

    set ConnectionValue = *($(ConnectionList), ~($(ConnectionValues),$(ConnectionIndex)))
    ifstr(i) $(ConnectionValue) == ""
        set ConnectionValue = *($(ConnectionList), 1)
    endif
    set StFdValue = *($(StFdList), ~($(StFdValues),$(StFdIndex)))
    ifstr(i) $(StFdValue) == ""
        set StFdValue = *($(StFdList), 1)
    endif

adapteroptions = +
    set from = adapteroptions
    read-syms FileDependentDlg$(!STF_LANGUAGE)
    ui start "InputDlg"
    ifstr(i) $(DLGEVENT) == "CONTINUE"
        set MemoryValueIndex = $(Combo1Out)
        set InterruptIndex = $(Combo2Out)
        set ConnectionIndex = $(Combo3Out)
        set StFdIndex = $(Combo4Out)
        ui pop 1
    else-ifstr(i) $(DLGEVENT) == "BACK"
        set CommonStatus = STATUS_USERCANCEL
        Debug-Output "OEMNADSI.INF: Action: exit. Bye."
        ui pop 1
        goto end
    else
        ui pop 1
        Debug-Output "OEMNADSI.INF: Action: unknown. Bye."
        goto end
    endif
    set ConnectionValue = *($(ConnectionValues), ~($(ConnectionList),$(ConnectionIndex)))
    set StFdValue = *($(StFdValues), ~($(StFdList),$(StFdIndex)))
nextstep = +
    ifint $(OldVersionExisted) == $(TRUE)
        ifstr(i) $(!NTN_InstallMode) == configure
            goto writeparameters
        endif
    endif
    StartWait
    Ifint $(OldVersionExisted) != $(FALSE)
        Goto installhardware
    Endif
    ifstr(i) $(!NTN_InstallMode) == "install"
       Ifstr(i) $(DoCopy) == "YES"
          Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
          Ifint $($ShellCode) != $(!SHELL_CODE_OK)
              Goto ShellCodeError
          Else-Ifstr(i) $($R0) == STATUS_FAILED
              Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
              ifint $($ShellCode) != $(!SHELL_CODE_OK)
                  goto ShellCodeError
              endif
              set Error = $($R0)
              Goto fatal
          Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
              Goto successful
          Endif
          Set SrcDir = $($R1)
       Endif
       install "Install-Option"
       ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
           Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
           ifint $($ShellCode) != $(!SHELL_CODE_OK)
               goto ShellCodeError
           endif
           set Error = $($R0)
           goto fatal
       endif
    endif
    Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
        $(ProductSoftwareName), +
        $(ProductSoftwareName), +
        $(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), +
        $(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+
        $(NetEventDLL), ""
    Set OEM_ABANDON_SOFTWARE = TRUE
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Debug-Output "OEMNADSI.INF: ShellCode error"
        goto ShellCodeError
    endif
    set RegistryErrorIndex = $($R0)
    Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
        EndWait
        Debug-Output "OEMNADSI.INF: Registry error: add software components"
        CloseRegKey $($R1)
        CloseRegKey $($R2)
        CloseRegKey $($R3)
        CloseRegKey $($R4)
        CloseRegKey $($R5)
        goto fatalregistry
    endif
    Set SoftProductKey  = $($R1)
    Set SoftNetRuleKey  = $($R2)
    Set SoftServiceKey  = $($R3)
    Set SoftParameterKey        = $($R4)
    Set SoftLinkageKey  = $($R5)
    set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
                       {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
                       {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
                       {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
                       {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
                       {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
                       {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
    Shell  $(UtilityInf), AddValueList, $(SoftProductKey), $(NewValueList)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "OEMNADSI.INF: ShellCode error."
            goto ShellCodeError
    endif
    set RegistryErrorIndex = $($R0)
    Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            EndWait
            Debug-Output "OEMNADSI.INF: Registry error: add value list for software product."
            CloseRegKey $(SoftProductKey)
            CloseRegKey $(SoftNetRuleKey)
            CloseRegKey $(SoftServiceKey)
            CloseRegKey $(SoftParameterKey)
        CloseRegKey $(SoftLinkageKey)
        goto fatalregistry
    endif
    set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
                        {use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
                        {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
                        {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
                        {bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, +
                        {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
    Shell  $(UtilityInf), AddValueList, $(SoftNetRuleKey), $(NewValueList)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "OEMNADSI.INF: ShellCode error."
            goto ShellCodeError
    endif
    Set RegistryErrorIndex = $($R0)
    CloseRegKey $(SoftProductKey)
    CloseRegKey $(SoftNetRuleKey)
    CloseRegKey $(SoftServiceKey)
    CloseRegKey $(SoftParameterKey)
    CloseRegKey $(SoftLinkageKey)
    Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
        EndWait
        Debug-Output "OEMNADSI.INF: Registry error: add value list."
        goto fatalregistry
    endif
installhardware =+
    Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
    ifint $($R4) != -1
        Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
    endif
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Debug-Output "OEMNADSI.INF: Cannot add hardware component"
        goto ShellCodeError
    endif
    set RegistryErrorIndex = $($R0)
    Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
        EndWait
        Debug-Output "OEMNADSI.INF: Registry error: add hardware component"
        CloseRegKey $($R1)
        CloseRegKey $($R2)
        CloseRegKey $($R3)
        goto fatalregistry
    endif
    set KeyProduct = $($R1)
    set KeyAdapterRules = $($R2)
    set KeyParameters = $($R3)
    set AdapterNumber = $($R4)
    set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
                       {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)},+
                       {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+
                       {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
                       {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
                       {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
    Shell  $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Debug-Output "OEMNADSI.INF: ShellCode error"
        goto ShellCodeError
    endif
    CloseRegKey $(KeyProduct)
    Set KeyProduct = ""
    set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
    set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
    set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+
                        {bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
                        {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, +
                        {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
    Shell  $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Debug-Output "OEMNADSI.INF: ShellCode error."
        goto ShellCodeError
    endif
    CloseRegKey $(KeyAdapterRules)
    Set RegistryErrorIndex = $($R0)
writeparameters = +
    Shell $(UtilityInf), GetBusTypeNum
    set BusTypeNum = $($R1)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Debug-Output "ShellCode error."
        goto ShellCodeError
    endif
    set BusNum = 0
    Ifstr(i) $(KeyParameters) == $(KeyNull)
        Debug-Output "OEMNADSI.INF:  *** KeyParameters is NULL at writeparameters"
    Endif
    set MemoryValue = *($(MemoryValues), ~($(MemoryList),$(MemoryValueIndex)))
    set InterruptValue = *($(InterruptValues), +
         ~($(InterruptList),$(InterruptIndex)))
    set ConnectionValue = *($(ConnectionValues), ~($(ConnectionList),$(ConnectionIndex)))
    set StFdValue = *($(StFdValues), ~($(StFdList),$(StFdIndex)))

    Debug-Output "LNDX100 SETUP IS WRITTING REGISTRY"

    ; 1998.9.30
    OpenRegKey $(!REG_H_LOCAL) "" $(CardwizDataBase) $(MAXIMUM_ALLOWED) KeyCardwiz
    ifstr $(KeyCardwiz) == $(KeyNull)
        set NewValueList = {+
                {MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
                {BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNumber)},+
                {BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusTypeNum)},+
                {MemoryMapAddress,$(NoTitle),$(!REG_VT_DWORD),$(MemoryValue)},+
                {Interrupt,$(NoTitle),$(!REG_VT_DWORD),$(InterruptValue)},+
                {ConnectionType,$(NoTitle),$(!REG_VT_DWORD),$(ConnectionValue)},+
                {StoreAndForward,$(NoTitle),$(!REG_VT_DWORD),$(StFdValue)},+
                ; 1998.9.30
                {Pcmcia,$(NoTitle),$(!REG_VT_DWORD),0},+
                {PlatformType,$(NoTitle),$(!REG_VT_DWORD),3},+
                ;!
                {WorkingEnviroment,$(NoTitle),$(!REG_VT_SZ),$(Enviroment)} }
    else
        set NewValueList = {+
                {MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
                {BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNumber)},+
                {BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusTypeNum)},+
                {MemoryMapAddress,$(NoTitle),$(!REG_VT_DWORD),$(MemoryValue)},+
                {Interrupt,$(NoTitle),$(!REG_VT_DWORD),$(InterruptValue)},+
                {ConnectionType,$(NoTitle),$(!REG_VT_DWORD),$(ConnectionValue)},+
                {StoreAndForward,$(NoTitle),$(!REG_VT_DWORD),$(StFdValue)},+
                ; 1998.9.30
                {Pcmcia,$(NoTitle),$(!REG_VT_DWORD),1},+
                {PlatformType,$(NoTitle),$(!REG_VT_DWORD),4},+
                ;!
                {WorkingEnviroment,$(NoTitle),$(!REG_VT_SZ),$(Enviroment)} }
    endif
    CloseRegKey $(KeyCardwiz)
    ;!

    Shell  $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
    Debug-Output "MemoryMapAddress: "$(MemoryValue)
    Debug-Output "Interruptess: "$(InterruptValue)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Debug-Output "OEMNADSI.INF: ShellCode error."
        goto ShellCodeError
    endif
    Set RegistryErrorIndex = $($R0)
    CloseRegKey $(KeyParameters)
    Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
        Debug-Output "OEMNADSI.INF: Registry error: Add value list"
        goto fatalregistry
    Endif

; 1998.9.30
    OpenRegKey $(!REG_H_LOCAL) "" $(CardwizDataBase) $(MAXIMUM_ALLOWED) KeyCardwiz
    ifstr $(KeyCardwiz) == $(KeyNull)
        Debug-Output "Registry Open Fail -- CardwizDataBase"
        goto NOTNT40
    endif
    Debug-Output "Open CardwizDataBase Registry Successful"

    OpenRegKey $(!REG_H_LOCAL) "" $(CWZManufactureKey) $(MAXIMUM_ALLOWED) KeyDataBase2
    ifstr $(KeyDataBase2) == $(KeyNull)
        Debug-Output " Cardwiz Keyword CardBus\FastEthernet does not exist "
        CreateRegKey $(KeyCardwiz) {"MacDataBase\CardBus\FastEthernet",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" KeyDataBase2
        ifstr $(KeyDataBase2) == $(KeyNull)
            Debug-Output "Cardwiz CardBus\FastEthernet Can not Create"
            goto NOTNT40
        endif
        Debug-Output "Cardwiz Create CardBus\FastEthernet Successful"
    endif

    Debug-Output "Cardwiz Set Keyword value -- Driver"
    SetRegValue $(KeyDataBase2) {"MacDriverHandle",$(NoTitle),$(!REG_VT_DWORD),0}
    SetRegValue $(KeyDataBase2) {"MacDriverName",$(NoTitle),$(!REG_VT_SZ),"LNDX100"}
    SetRegValue $(KeyDataBase2) {"MacDriverState",$(NoTitle),$(!REG_VT_DWORD),1}
    SetRegValue $(KeyDataBase2) {"MacDriverVersion",$(NoTitle),$(!REG_VT_DWORD),0x100}
    SetRegValue $(KeyDataBase2) {"MacSwapCapability",$(NoTitle),$(!REG_VT_DWORD),2}

    CloseRegKey $(KeyDataBase2)
    CloseRegKey $(KeyCardwiz)

    OpenRegKey $(!REG_H_LOCAL) "" $(PCCardDBKeyName) $(MAXIMUM_ALLOWED) PCCardDBKey
    ifstr $(PCCardDBKey) == $(KeyNull)
        Debug-Output "Registry Open Fail -- PCCardDBKeyName"
        goto NOTNT40
    endif
    Debug-Output "Open PCCardDBKeyName Registry Successful"

    OpenRegKey $(!REG_H_LOCAL) "" $(ManufactureKey) $(MAXIMUM_ALLOWED) KeyDataBase
    ifstr $(KeyDataBase) == $(KeyNull)
        Debug-Output " Keyword CardBus\FastEthernet does not exist"
        CreateRegKey $(PCCardDBKey) {"CardBus\FastEthernet",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" KeyDataBase
        ifstr $(KeyDataBase) == $(KeyNull)
            Debug-Output "CardBus\FastEthernet Can not Create"
            CloseRegKey $(PCCardDBKey)
            goto fatalregistry
        endif
        Debug-Output "Create CardBus\FastEthernet Successful"
    endif

    Debug-Output "Set Keyword value -- Driver"
    SetRegValue $(KeyDataBase) {"AttributeMemorySize",$(NoTitle),$(!REG_VT_DWORD),4096}
    SetRegValue $(KeyDataBase) {"Driver",$(NoTitle),$(!REG_VT_SZ),"LNDX100"}
    SetRegValue $(KeyDataBase) {"DeviceType",$(NoTitle),$(!REG_VT_SZ),"NET"}

    CloseRegKey $(KeyDataBase)
    CloseRegKey $(PCCardDBKey)


NOTNT40 = +

;!

    EndWait
    goto successful
bindingadapter =+
    set Error = "Binding: Sorry, not yet implemented."
    goto fatal
removeadapter = +
    Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
        Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
            $(ProductSoftwareName)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "OEMNADSI.INF: ShellCode error"
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            goto fatalregistry
        endif
    else
        Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
            $(ProductSoftwareName), $(!NTN_RegBase)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "OEMNADSI.INF: ShellCode error"
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            goto fatalregistry
        endif
    endif
    goto end
UpgradeSoftware = +
    ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
        OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
        Ifstr $(KeyProduct) != $(KeyNull)
            GetRegValue $(KeyProduct),"MajorVersion", VersionInfo
            set Version = *($(VersionInfo), 4)
            Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct)
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                Debug-Output "ShellCode error"
                goto ShellCodeError
            endif
            set !UG_Filename = $($R0)
            ifstr(i) $(!UG_Filename) != ""
                install "Install-Update"
                ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
                    goto fatal
                endif
            endif
            SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
            SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}
            ifint $(Version) != $(ProductVersion)
            endif
            CloseRegKey $(KeyProduct)
        else
            goto fatalregistry
        endif
    else
        OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) +
              $(MAXIMUM_ALLOWED) NetworkCardKey
        Ifstr(i) $(NetworkCardKey) != $(KeyNull)
            GetRegValue $(NetworkCardKey),"ServiceName", ServiceNameInfo
            set ServiceName = *($(ServiceNameInfo), 4)
            OpenRegKey $(NetworkCardKey) "" "NetRules" +
                $(MAXIMUM_ALLOWED) NetRuleKey
            Ifstr(i) $(NetRuleKey) != $(KeyNull)
            else
                goto fatalregistry
            endif
            CloseRegKey $(NetRules)
            CloseRegKey $(NetworkCardKey)
        else
            goto fatalregistry
        endif
        OpenRegKey $(!REG_H_LOCAL) "" +
              $(!NTN_ServiceBase)"\"$(ServiceName) +
              $(MAXIMUM_ALLOWED) ServiceKey
        Ifstr(i) $(ServiceKey) != $(KeyNull)
            CloseRegKey $(ServiceKey)
        else
            goto fatalregistry
        endif
    endif
    goto end
successful = +
    Debug-Output "LNDX100 SETUP SUCCESSFUL"
    goto end
abandon = +
    ForListDo $(OEM_ABANDON_OPTIONS)
        Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
            $(ProductSoftwareName), $($)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "OEMNADSI.INF: ShellCode error"
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            goto fatalregistry
        endif
    EndForListDo
    Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
        Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
            $(ProductSoftwareName), FALSE
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "OEMNADSI.INF: ShellCode error"
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            goto fatalregistry
        endif
    endif
    goto end
warning = +
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
        goto $(to)
    else-ifstr(i) $($R1) == "CANCEL"
        goto $(from)
    else
        goto "end"
    endif
nonfatalinfo = +
    Set CommonStatus = STATUS_USERCANCEL
    Set Severity = STATUS
    goto nonfatalmsg
nonfatal = +
    Set Severity = NONFATAL
    goto nonfatalmsg
nonfatalmsg = +
    ifstr(i) $(Error) == ""
        Set Severity = NONFATAL
        Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
        goto $(from)
    else
        goto "end"
    endif
fatalregistry = +
    Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    set Error = $($R0)
    goto fatal
fatal = +
    Debug-Output "LNDX100 SETUP FATAL ERROR"
    ifstr(i) $(Error) == ""
        Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    goto setfailed
ShellCodeError = +
    Debug-Output "LNDX100 SETUP SHELL CODE ERROR"
    set DlgType      = "MessageBox"
    set STF_MB_TITLE = $(ShellCodeErrorTitle)
    set STF_MB_TEXT  = $(ShellCodeErrorText)
    set STF_MB_TYPE  = 1
    set STF_MB_ICON  = 3
    set STF_MB_DEF   = 1
    ui start "Error Message"
    goto setfailed
setfailed = +
    set CommonStatus = STATUS_FAILED
    ifstr(i) $(OEM_ABANDON_ON) == TRUE
        set OEM_ABANDON_ON = FALSE
        goto abandon
    endif
    goto end
end = +
    Debug-Output "LNDX100 SETUP END"
    goto term
term = +
    Return $(CommonStatus)
[Install-Option]
    set STF_VITAL = ""
    ifstr(i) $(AddCopy) == "YES"
        AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
    endif
    Debug-Output "OEMNADSI.INF: [Install-Option] DoCopy = "$(DoCopy)
    ifstr(i) $(DoCopy) == "YES"
       set !STF_NCPA_FLUSH_COPYLIST = TRUE
       CopyFilesInCopyList
    endif
    ifstr(i) $(DoConfig) == "YES"
    endif
    Exit
[Install-Update]
   set STF_VITAL        = ""
   set STF_OVERWRITE    = "VERIFYSOURCEOLDER"
   AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
   AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH)
   set !STF_NCPA_FLUSH_COPYLIST = TRUE
   CopyFilesInCopyList
   exit
[DebugControl]
   set !DebugOutputControl = 1
   return
[Source Media Descriptions]
    1  = "LNDX100 Setup Disk"  , TAGFILE = disk
[ProductType]
STF_PRODUCT  = Winnt
STF_PLATFORM = I386
[Files-Inf]
1,      oemsetnt.inf,    SIZE=1000,     RENAME=$(!UG_Filename)
[Files-LNDX100]
1,LNDX100.SYS , SIZE=67400
[LanguagesSupported]
    ENG
[OptionsTextENG]
    LNDX100  = "10/100 Mbps FastEthernet CardBus PC Card"
[FileConstantsENG]
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
               "Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"
FunctionTitle                   = "10/100 Mbps FastEthernet CardBus PC Card Setup"
ProductSoftwareDescription      = "10/100 Mbps FastEthernet CardBus PC Card Driver"
ProductHardwareLNDX100Description   = "10/100 Mbps FastEthernet CardBus PC Card"
ProductSoftwareTitle            = "10/100 Mbps FastEthernet CardBus PC Card Driver"
ProductHardwareLNDX100Title             = "10/100 Mbps FastEthernet CardBus PC Card"
MemoryList  = ^(MemoryChoices, 1)
MemoryValues = ^(MemoryChoices, 2)
InterruptList = ^(InterruptChoices, 1)
InterruptValues = ^(InterruptChoices, 2)
ConnectionList = ^(ConnectionChoices, 1)
ConnectionValues = ^(ConnectionChoices, 2)
StFdList = ^(StoreAndForwardChoices, 1)
StFdValues = ^(StoreAndForwardChoices, 2)
ShellCodeErrorTitle     = "Error: "$(FunctionTitle)
ShellCodeErrorText      = "Shell Code Error."
[DialogConstantsENG]
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel      = "Cancel"
[FileDependentDlgENG]
Combo1Label = "&Memory And I/O:"
Combo2Label = "&Interrupt Value:"
Combo3Label = "&Connection Type:"
Combo4Label = "&Store And Forward:"
DlgType = "RadioCombination"
DlgTemplate = "EE_16"
Caption = $(FunctionTitle)
Combo1List = $(MemoryList)
Combo1Out  = $(MemoryValue)
Combo2List = $(InterruptList)
Combo2Out  = $(InterruptValue)
; ++
Combo3List = $(ConnectionList)
Combo3Out  = $(ConnectionValue)
Combo4List = $(StFdList)
Combo4Out  = $(StFdValue)
; --
ComboListItemsIn  = {Combo1List, Combo2List, Combo3List, Combo4List}
ComboListItemsOut = {Combo1Out, Combo2Out, Combo3Out, Combo4Out}
EditTextLim = ""
CBOptionsGreyed = {}




Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

Copyright © 1996 - 2024 DriverGuide is an iCentric Corporation Company.    All rights reserved.
Privacy Policy
server: web4, load: 1.17