1. nea2000.zip Driver
2. README.TXT File Contents

README.TXT Driver File Contents (nea2000.zip)

   LAN Manager Workstation/Server

   Introduction:
   -------------
   This document describes the procedure to setup LAN  Manager 2.1
   Workstation/Server driver for PCI Ethernet adapter.

   Location of Driver:(DOS) \NDIS\DOS\PCIND.DOS
                      (OS/2)\NDIS\OS2\PCIND.OS2


   Sample Configuration Files:
   ---------------------------
      CONFIG.SYS (for DOS will contain):

          DEVICE=C:\LANMAN.DOS\DRIVERS\PROTMAN\PROTMAN.DOS /I:C:\LANMAN.DOS
          DEVICE=C:\LANMAN.DOS\DRIVERS\ETHERNET\RTL8029\PCIND.DOS


      CONFIG.SYS (for OS/2 will contain):

          DEVICE=C:\LANMAN.OS2\DRIVERS\PROTMAN\PROTMAN.OS2 /I:C:\LANMAN.OS2
          DEVICE=C:\LANMAN.OS2\DRIVERS\ETHERNET\RTL8029\PCIND.OS2


      PROTOCOL.INI (will contain):

         [RTL8029_NIF]
         ; RTL8029 RPOTOCOL.INI SAMPLE

           DriverName = PCIND$
           AdapterID  = 0000B4000001  ;  This item is only required when
                                      ;  more than one PCI Adapters
                                      ;  exist on one system.

   Setup driver procedures on LAN Manager workstation/server :
   -----------------------------------------------------------
      Before you start the installation process, make sure that the
      adapter  is properly installed and  configured. Make  sure  your
      Microsoft LAN Manager is properly installed.

      1. Run the appropriate Microsoft Lan Manager SETUP for computer you
         are setting up.(DOS, OS/2 or OS/2 Server). Select "Configuration"
         item ,(this driver diskette isn't included on the Lan Manager disk)
         and insert the PCI Ethernet driver disk,  select the Realtek
         driver and follow the directions.

      2. When completed, reboot your computer.


   NOTES:
   ------

      1. Parameters for the PROTOCOL.INI file:

         DRIVERNAME: This is the one required parameter. See example at top
                     of this document for syntax.

         AdapterID : This  keyword is provided  by PCIND, and is  required
                     when  more  than  one  RTL8029  adapters exist on one
                     system. You must modify the AdapterID value in file,
                     \LANMAN\PROTOCOL.INI, by yourself.

      2. Sample PROTOCOL.INI for LAN Manager:

           [PROTMAN]
           DRIVERNAME = PROTMAN$
           DYNAMIC = YES
           PRIORITY = NETBEUI

           [NETBEUI_XIF]
           Drivername = netbeui$
           SESSIONS = 6
           NCBS = 12
           BINDINGS = "RTL8029_NIF"
           LANABASE = 0

           [RTL8029_NIF]
           ;
           ; RTL8029 PROTOCOL.INI Sample Adapter
           ;
           DriverName = PCIND$
           AdapterID  = 0000B4000001



How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

• Expand the archive file (if the download file is in zip or rar format).

• If the expanded file has an .exe extension, double click it and follow the installation instructions.

• Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

• Find the device and model you want to update in the device list.

• Double-click on it to open the Properties dialog box.

• From the Properties dialog box, select the Driver tab.

• Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.