Flash-Bios-Update for HOT-539P PCI-Mainboards ============================================= Attention: This file may not be up to date. We are not liable for any damages caused by the bios-update. 1) Programming voltage for SST- or Winbond-Chip is 5V (default). 2) disable EMM386.EXE driver or other memory manager (CONFIG.SYS). 3) start Bios-Setup: Chipset Setup - Main BIOS Cacheable: non-cacheable (disable Bios-Caching if possible) 4) Start programming tool as follow: - FLASH465 539AIP17.ROM (actual BIOS = AMI) - AWDFLASH 539AIP17.ROM (actual BIOS = AWARD) The BIOS display its Version on the screen while booting: "...-0117-..." for Version 17Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.