README.TXT Driver File Contents (AWDFLASH.zip)

FLASH Memory Update Utility Release 3.2 
 
This utility is used to save and update FLASH memory. It is recommended 
that this utility be executed from a bootable MS-DOS diskette that 
contains BIOS recovery files for the target system (i.e. BIOS.REC). 
 
This utility must be executed in a system without memory managers installed. 
If EMM386, QEMM, 386MAX, or Windows is active, then the FLASH update 
is not safe.  Remove any memory manager or exit Windows before executing 
the FLASH Memory Update Utility. 
 
You must record your CMOS SETUP parameters before updating the BIOS and set 
the CMOS parameters to default values after the update is complete, then 
re-enter the original values.  Erratic operation may result if the SETUP 
parameters are not set to default values.  You can set the CMOS parameters 
to default values by entering SETUP and hitting the F5 key.  The CMOS 
memory map may change from BIOS version to BIOS version, setting the 
parameters to default values will guarantee the CMOS memory is updated 
correctly. 
 
See the file BIOINSTR.TXT for complete instructions on updating the BIOS. 
 
SHOWHDR.EXE:  This tool is provided to display header information on the 
specified FLASH data image. 
 
Usage: SHOWHDR.EXE FLASH_data_image_filename 
 
BIOSUP.EXE:  DOS command line FLASH update utility 
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web4, load: 0.32