HOT-553 (P5/PCI/i430HX)
- Chipset: Intel T-Chip 430 HX
- Bios: AWARD (Flash-EPROM, incl. NCR chip support)
- Power Managemenet (SMI-Mode, EPMI, APM)
- Slots: 4 x PCI, 4 x ISA
- onboard: 2-channel enhanced PCI IDE controller (up to PIO-mode 4, max. 16 MB/s)
- other interfaces: Floppy, 2 x Ser. (Fifo, 16550 comp.), 1 x Par. (SSP/EPP/ECP), USB, IR-Support
- CPUs:
Intel Pentium P54C (75 ... 200 MHz),
AMD K5 (PR75 ... PR150),
Cyrix/IBM 6x86 (P90+ ... P166+)
Attention: VRM-module is required with Cyrix 6x86 P150+ and P166+ and
for Dual-Voltage-CPUs like Cyrix/IBM 6x86L and Intel Pentium P55C MMX
- CPU voltage select: 3,3 / 3,45 / 3,6 Volt
- Systemclock: 40, 50, 60, 66 MHz
- Memory: 4 Sockets for 72 Pin PS/2 Modules (4, 8, 16, 32, 64 MB FPM oder EDO); max 256 MB
mainboard supports "Error Checking and Correction" (ECC) with parity-modules
- external Cache (L2): Write-Back, 256 kB PB-Cache onboard, Coast-Socket for Upgrade-Module
- internal Cache (L1): Write-Back
- Interface for PS/2 mouse
- Dimensions: 22 x 28 cm
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.