HOT-433P (486er/PCI/UMC) Distinguishing mark: Dimensions 22 x 26 cm, 2 Cache-Bänke for 8 Chips - Chipset: UMC 8881/8886/8663 - Bios: AMI WinBIOS (incl. NCR chip support) - Power Managemenet (SMI-Mode, EPMI, APM) - Slots: 4 x PCI, 4 x ISA - onboard: 2-channel enhanced PCI IDE controller - weitere Schnittstellen: Floppy, 2 x Seriell (Fifo, 16550 comp.), 1 x Parallele (SSP/EPP/ECP) - INTEL-CPUs: 486DX/DX2/DX4/SX (S-Series), 486DX/DX2/SX, P24D - AMD-CPUs: Am486 Enhanced (SV8B), AM5x86-P75, AM486DX/DX2/DX4 (NV8T) - Cyrix-CPUs: Cx5x86, Cx486S (M6), Cx486DX/DX2/DX4 (M7) - UMC U5-S - CPU voltage select: 3,3 / 3,45 / 3,6 / 4.0 / 5 Volt - Systemclock: 25, 33, 40, 50 MHz - Memory: 4 Sockets for 72 Pin PS/2 Modules (1, 2, 4, 8, 16, 32, 64 MB); max 256 MB - external Cache (L2): Write-Back, supports memory sizes between 128 kB and 1 MB (256 kB default) - internal Cache (L1): Writeback modus possible - mainboard version with AT-keyboard connector doesn't support PS/2 mouseDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.