HOT-565 Mainboard (P5/PCI/i430TX)
- Chipset: Intel T-Chip 430 TX
- Bios: AWARD (Flash-EPROM)
- Power Managemenet (SMI-Mode, EPMI-Pin, APM 1.2)
- Slots: 4 x PCI, 3 x ISA
- onboard: 2-channel enhanced PCI IDE controller
PIO-mode 4, DMA Mode 2, transfers up to 22 MB/sec
supports "Ultra 33" synchronous DMA mode transfer tup to 33 MB/s
integrated 8 x 32bit buffer for PCI IDE burst transfers
- other interfaces:
Floppy, 2 x Ser. (Fifo, 16C550 comp.),
1 x Par. (SSP/EPP/ECP), 2 x USB, IR-Support
- CPU support:
Intel Pentium P54C (75 ... 200 MHz),
Intel Pentium P55C MMX (166 ... 233 MHz),
AMD K5 (PR75 ... PR200),
AMD K6 (PR2-166 ... PR2-233) and
Cyrix/IBM 6x86/6x86L (P120+ ... P166+)
- CPU voltage select: single or dual voltage
- Systemclock: 50, 55, 60, 66 MHz
- Memory: maximal 256 MB
4 Sockets for 72 Pin PS/2 Modules (4, 8, 16, 32, 64 MB FPM or EDO);
2 Sockets for 168 Pin DIMM Module (8, 16, 32, 64, 128 MB sync. DRAM, EDO o. FPM)
User should not populate both 5V SIMM & 3,3V DIMM modules at the same time!
- external Cache (L2): Write-Back, 256 or 512 kB PB-Cache onboard
- internal Cache (L1): Write-Back
- Interface for PS/2 mouse
- Dimensions: 22 x 28 cm
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.