HOT-569A Version 1.x AT-Mainboard (P5/PCI/i430TX)
Version-ID is found on the mainboard next to the outer ISA-Slot!
- Chipset: Intel T-Chip 430 TX
- Bios: AWARD V4.51PG (Flash-EPROM, SDMS support)
- Power supply: AT and ATX power connector onboard
- Power Management:
ACPI (Advanced Configuration and Power Interface)
Suspend/Soft-off mode by power button (ATX power only)
Auto FAN off (system and CPU FAN power off in suspend mode)
- Slots: 4 x PCI, 3 x ISA
- onboard: 2-channel enhanced PCI IDE controller
PIO-mode 4, DMA Mode 2
supports "Ultra 33" synchronous DMA mode transfer up to 33 MB/s
- other interfaces:
Floppy, 2 x Ser. (Fifo, 16C550 comp.), PS/2-Mouse,
1 x Par. (SSP/EPP/ECP), 2 x USB, IR-Support
- Monitor function: Virus Warning
- Spread Spectrum Modulated to reduce the EMI
- CPU support:
Intel Pentium P54C (75 ... 200 MHz),
Intel Pentium P55C MMX (166 ... 233 MHz),
AMD K5 (PR75 ... PR166),
AMD K6 (166 ... 266 MHz) and
Cyrix/IBM 6x86 (P120+ ... P166+)
Cyrix/IBM 6x86L (P150+ ... P166+)
Cyrix/IBM 6x86MX (PR166 ... PR266+)
- CPU voltage Auto-detecting and Setting
- Systemclock: 50, 55, 60, 66, 75, 83 MHz
- Memory: maximal 256 MB
4 Sockets for 72 Pin PS/2 Modules (4, 8, 16, 32, 64 MB FPM or EDO);
2 Sockets for 168 Pin DIMM Modules (8, 16, 32, 64, 128 MB sync. DRAM, EDO DRAM)
User should not populate both 5V SIMM & 3,3V DIMM modules
at the same time!
- external Cache (L2): Write-Back, 512 kB PB-Cache onboard
- internal Cache (L1): Write-Back
- Cooling Fan Connector:
CPU and System Cooling Fan Connector (RPM-support)
optional: EISCA Cooler Connector
- Board Size: 3/4 baby AT compact size 22 x 22 cm
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.