HOT-661V Version 1.x/2.x ATX-Mainboard (PII/PCI/AGP)
Version-ID is found on the mainboard next to the outer ISA-Slot!
- Chipset: VIA VT82C692BX Apollo Pro(TM)
- AGP: Supports 66MHz/133MHz(Sideband) AGP graphic device
- Bios: AWARD V4.51PG (Flash-EPROM, SDMS support)
- Power supply: ATX power connector onboard
- Power Management:
ACPI (Advanced Configuration and Power Interface)
Suspend/Soft-off mode by power button
Auto FAN off (system and CPU FAN power off in suspend mode)
- Slots: 1 x AGP, 4 x PCI, 3 x ISA
- onboard: 2-channel enhanced PCI IDE controller
PIO-mode 4, DMA Mode 2
supports "Ultra 33" synchronous DMA mode transfer up to 33 MB/s
- other interfaces:
Floppy, 2 x Ser. (Fifo, 16C550 comp.), PS/2-Mouse,
1 x Par. (SSP/EPP/ECP), 2 x USB, IR-Support
- Monitor functions:
Voltages Monitoring
FAN Status Monitoring (cooling FAN with RPM sensor only)
Virus Warning
- Spread Spectrum Modulated
to reduce the EMI
- CPU support:
Intel Pentium II & Celeron (233 ... 500 MHz),
- CPU voltage Auto-detecting and Setting
- System clock: 50, 66, 75, 83, 100 and 103 MHz
- Memory: maximum 1024 MB
4 Sockets for 168 Pin DIMM Modules (8, 16, 32, 64, 128, 256 MB PC100 sync. DRAM)
- external Cache (L2): Write-Back, 512KB or 256KB PB-Cache on Pentium II Processor.
- internal Cache (L1): Write-Back
- Cooling Fan Connector:
CPU and System Cooling Fan Connector (RPM-support)
- Board Size: ATX Form Factor compact size 30.5 x 17.0 cm
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.