*************************************** * * * EZCONF.EXE V1.03 * * * *************************************** PnP Ethernet Card Configuration and Diagnostics file ---------------------------------------------------- To configure your PnP Ethernet Card, execute the configuration file,EZCONF. A screen menu will guide you to configure the PnP Ethernet Card to fit your computer system's environment. The following is the configuration parameters. Operating Mode : AUTO, NE2000 , PnP I/O Address : 220h,240h,260h,280h,2A0h,2C0h,2E0h,300h,320h, 340h,360h,380h,3A0h,3C0h,3E0h IRQ Line : 9(2),3,4,5,10,11,12,15 BOOT ROM Address : C000H,32K C800H,32K D000H,32K D800H,32K C000H,16K C400H,16K C800H,16K CC00H,16K D000H,16K D400H,16K D800H,16K DC00H,16K Media : UTP , BNC , UTP/BNC ( Auto-Detect ) Data Width : 8 bits or 16 bits; auto sensing by hardware Before you install the drivers and connect the PnP Ethernet Card to the network, make sure to run the diagnostics to assure the proper function of the PnP Ethernet Card. The diagnostics includes two groups of test : 1. Card initialization and loopback test This test performs the function of verifying the components, connectors, and circuitry. 2. Network test This test performs the data transmission and reception of the adapter. A screen menu provides you with the instructions to conduct this test. ------------------------------------[END]---------------------------------------Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.