5692.TXT Driver File Contents (ENGLISH.zip)

HOT-569 Version 2.x AT-Mainboard (P5/PCI/i430TX)
Version-ID is found on the mainboard next to the outer ISA-Slot!
- Chipset: Intel T-Chip 430 TX
- Bios: AWARD V4.51PG (Flash-EPROM, SDMS support)
- Power supply: AT and ATX power connector onboard
- Power Management:
    ACPI (Advanced Configuration and Power Interface)
    Suspend/Soft-off mode by power button (ATX power only)
    Auto FAN off (system and CPU FAN power off in suspend mode)
- Slots: 4 x PCI, 3 x ISA
- onboard: 2-channel enhanced PCI IDE controller
    PIO-mode 4, DMA Mode 2
    supports "Ultra 33" synchronous DMA mode transfer up to 33 MB/s
- other interfaces:
    Floppy, 2 x Ser. (Fifo, 16C550 comp.), PS/2-Mouse,
    1 x Par. (SSP/EPP/ECP), 2 x USB, IR-Support
- Monitor function: Virus Warning
- Spread Spectrum Modulated
    to reduce the EMI
- CPU support:
    Intel Pentium P54C (75 ... 200 MHz),
    Intel Pentium P55C MMX (166 ... 233 MHz),
    AMD K5 (PR75 ... PR166),
    AMD K6 (166 ... 266 MHz) and
    Cyrix/IBM 6x86 (P120+ ... P166+)
    Cyrix/IBM 6x86L (P150+ ... P166+)
    Cyrix/IBM 6x86MX (PR166 ... PR266+)
- CPU voltage Auto-detecting and Setting
- Systemclock: 50, 55, 60, 66, 75, 83 MHz
- Memory: maximal 256 MB
    4 Sockets for 72 Pin PS/2 Modules (4, 8, 16, 32, 64 MB FPM or EDO);
    3 Sockets for 168 Pin DIMM Modules (8, 16, 32, 64, 128 MB sync. DRAM, EDO o. FPM)
    User should not populate both 5V SIMM & 3,3V DIMM modules
    at the same time!
- external Cache (L2): Write-Back, 512 kB PB-Cache onboard
- internal Cache (L1): Write-Back
- Cooling Fan Connector:
    CPU and System Cooling Fan Connector (RPM-support)
    optional: EISCA Cooler Connector
- Board Size: 3/4 baby AT compact size 22 x 28 cm
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: ftp, load: 1.00