07/28/1995
SCO UNIX Stream Driver for
ENW-8300 PCI Bus Adapter Installation
==================================================
You can use the following files for installation:
Files Description
----------- -------------------------------------------------------
readme.txt this readme file
driver.o ENW-8300 PCI Adapter Driver Program
setup Setup program for converting DOS format to UNIX format
info
init
master
node
reconf
remove
space.c
system
dummy.o
Mkdev
install
install.ID
install.sco
make
macstat.h
-----------------------------------------------------------------------
1. Login as a root user. (On maintenance mode)
2. Insert the Driver diskette into floppy Drive A:\ (or B:\) and use DOSCP
command to copy ENW-8300 SCO UNIX PCI Driver to UNIX's directories
as follows:
# cd /
# doscp A:/sco/setup /setup
# chmod +x /setup
# ./setup
# cd /pci
# ./install
3. Do you wish to install or delete the E32SCO driver (i/d/q) press <i> key
4. Do you want to install another E32SCO board ? (y/n/q) press <n> key
5. Enter IP Address : (For example : 192.72.24.174)
6. Enter broadcast address [192.72.24.255] :
7. Enter netmask (default 255.255.255.0)
8. Do you want to (I)nstall , (R)evise or (S)kip the
pci0 driver IP configuration ? (i,r,s) press <i> key
9. Do you want to relink to kernel now ? press <y> key
10. Do you want to reboot now ? (y/n/q) press <y> key
11. Shutdown started.
Do you want to continue ? (y or n): press <y> key
12. ... a sequence of shutdown process, then the sign
**** Safe to Power off *****
- or -
*** Press Any Key to Reboot **** (Press any key)
13. Boot : (Press <enter>)
14. The following lines should appear on the screen :
%ethernet 0x6000-0x601F 10 - type=32-bit IO Mode PCI Ethernet Adapter
15. Press <CTRL+D> to proceed with the normal startup,
(or enter the root password for system maintenance)
16. After the 'Starting TCP/IP: .....' process has been completed,
the PCI network adapter will be operational.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.